SunSpectre

Make: Tokyo Marui Gun/Model: G19 Gen 3 Accessories: 3 magazines, holster, & pistol torch. Condition: Used – Full Working Order FPS: 315 Splits/Swaps/Part Exchange: No/No/No Price/Payment: £198, Inclusive of PayPal & Tracked Shipping Pictures: See Attached/Below and Video. For sale is this excellent condition snappy all-round performing G19 from Tokyo Marui, a nifty and crisp cycling handgun available as a bundle at 45% off retail price. The G19 functions and performs as expected from any Tokyo Marui (TM) pistol, very well. Furthermore, the 19 offers a beautifully snappy cycle rate that translates over to excellent cold weather performance. It chronoed at about 305 on 0.2g, a little hotter than the 280-290 expected of TM’s, though it was on green gas and a little warm today. What makes the G19 crucially distinct from many previous Glock models such as the G17 Gen 3 are three important features. 1. Most importantly it uses the new generation Glock blowback system from TM, this model of G19 was the first model to introduce this system and lends itself to the excellent gas efficiency, cold weather performance, and crisp shooting experience 2. The model also has a metal insert in the slide where the slide stop engages, a part that frequently wore out in older models. 3. The slide has another steep insert at the front that is impacted when the side travels all the way rearward, not only does this make for a satisfying sharp snap upon shooing, but previous models plastic inserts worse out and resulted in a failure where the slide would lock back rearward and require disassembly to fix. This problem does not exist with the G19. As demonstrated in the video (see the attached/link) the guns action operates wonderfully. The condition of the 19 is excellent. The pistol has no damage other than the odd holster mark on the slide. The included Nuprol NX300 (Surefire X300U replica) has marks on the sides from where some of the paint has been worn away, however it is fully functioning, and comes with a polycarbonate bb-proof lens already installed, as well as batteries included. The magazines have some unique identifier markings on the bottom (as prictured) to differentiate them from other G19 magazines as well as acting as numeric identifiers for each magazine. All magazines are fully functioning, gas tight and leak free. The pistol comes with it’s original box and included in the bundle are three magazines, a Nuprol NX300 torch, and accompanying custom level-2 kydex holster from HW Holsters. The Genuine Crye Precision MultiCam holster is absolutely fantastic, accommodating suitable for use with the X300U torch and can be attached to any mount of your choice that uses Safariland pattern mounting holes. The holster uses the well-liked BladeTech WRS II Hood, for level-2 retention. Offering a satisfying snap release and higher assurance of retention. A full price breakdown is attached in the photos. The bundle is available at £198 inclusive of PayPal fees and Tracked Shipping via a RIF accepting courier service. This represents a 45% discount from retail price. https://youtu.be/Ba99sGeseEw

Small Crye Precision MultiCam Plate Carrier and Chest Rig Combo. This rig is made up of a SAPI Small/Medium set of plate bags with genuine ROC 40 shoulder buckles and an elasticated cummerbund using repro first spear tubes. The whole carrier is made from genuine Crye Precision MultiCam material. The placard attaches via the Crye AVS type velcro tabs. When the placard and front portion are removed from the cummerbund, the split bar cummerbund tubes can be removed and a 38mm split bar side release buckles added, attaching a chest rig X-harness. Blanking the rear facing hook velcro with the included loop velcro panels turns the placard into a stand-alone chest rig. This means the rig can be run with or without armour. While the plate bags are S/M SAPI, the cummerbund and chest rig straps are very much size small. The carrier is sized to someone of roughly 36 inch chest or less. The carrier is in used condition but full working order. There is the odd fraying, fading, blemish and minor defect but nothing that compromises the carrier on the whole. The carrier comes with 3 ESSTAC-style kydex mag pouches (inserts included) on the placard and an elasticated ratio pouch. Each side of the cummerbund will also accept 1 rifle magazine. None of the demonstration items are included. No: magazines, radio, PTT, PTT retainer, plates, or patch. Price of £70/€80 is inclusive of UK shipping, will ship EU for £10/€12 or global for £20/€24 Grab a bargain on this unique small MultiCam carrier.

50% off retail Tokyo Marui Beretta M9A1 GBB Pistol Bundle Make: Tokyo Marui Gun/Model: M9A1 Accessories: 4 magazines, holster, & pistol torch. Condition: Used – Full Working Order FPS: 315 Splits/Swaps/Part Exchange: No/No/No Price/Payment: £160, Inclusive of PayPal & Tracked Shipping Pictures: See Attached/Below and Video. For sale is the venerable M9A1 from Tokyo Marui, a beautiful and high performing full-sized handgun available as a bundle at 50% off retail price. The M9 functions and performs as expected from any Tokyo Marui (TM) pistol, very well indeed. It chronoed at about 315 on 0.2g, a little hotter than the 280-290 expected of TM’s, though it was on green gas an a little warmer today. What makes the M9A1 crucially distinct from previous TM M9 models such as the M92F and limited-edition models are four important features. 1. The M9A1 has a railed frame, allowing for the attachment of weapon lights (included). 2. The safety also provides a de-cocking feature. Not only is this true to life but it allows the weapon to be carried and used as intended. Load a round into the chamber, engage the safety to de-cock the weapon, disengage the safety ready to fire, holster the weapon. The gun is then ready to fire it’s first shot via double-action with an increased degree of safety but without a binary safety. 3. The pistol features a beefy metal insert in the frame and grip weights, bringing the weight up to 960g, the same as the real steel Beretta. 4. Most importantly, the M9A1 has an adjustable rather than fixed hop. This is what makes previous M9 models so trash, and these models of M9s so good. Despite the full real weight of the pistol, the classic Tokyo Marui build allows for a light, snappy, and efficient slide cycling. This makes the pistol crisp to shoot (see the attached/linked video) and very gas efficient, excellent for colder weather applications. The only notable fault on the M9 is the absence of it’s rear sight (pictured). These appear to be £5.99 online and just wasn’t something I’d gotten around to as I was perfectly happy point-shooting and it doesn’t impact the function of the pistol. The pistol comes with it’s original box and included in the bundle are four further leak-free magazines, a SureFire style X300U pistol torch, and accompanying custom kydex holster from HW Holsters. The holster is suitable for use with the X300U torch and can be attached to your mount of choice, either by the Blackhawk pattern mounting holes or via a modified Safariland style QLS fork (included) which effectively convers the BlackHawk type mounting to Safariland. A full price breakdown is attached in the photos. The bundle is available at £160 inclusive of PayPal fees and Tracked Shipping via a RIF accepting courier service. This represents a 50% discount from retail price. https://youtu.be/pkd4kjmOcSc

LPC Type MultiCam and Olive Drab QD ROC Buckle Cummerbunds! One unit Olive Drab, one unit MultiCam ready for immediate dispatch. Designed for DCS retrofit or any plate carrier that uses conventional front and rear plate bag velcro. Hello, I’ve seen a number of posts from people in a WAS Owners looking for LPC quick release cummerbunds, either to resize their existing LPC or give quick release capability to their legacy carriers like the DCS. I would have thought these would be readily available but it turns out they are not. I found a source for some in the states but costed at £90 before import duty and tax. Another alternative is a solution from another leading brand like Coyote Tactical but these are prices at £100 and use the Crye style lattice shock cord attachment method, incompatible with the WAS velcro system. The last alternative is the cheaper Chinese made solutions, similarly lattice shock cord attachment type and often offspec. With a capability gap identified I’ve decided to do a limited run on LPC type cummerbunds built to WAS spec. I’ve been building nylon tactical kit for a couple of years now and feel that this is a good opportunity to fill this gap. The cummerbund is built with all milspec materials, the only parts that might not be considered milspec would be the paracord pull tabs on the ROC buckes. Everything else, including thread, is to spec. The size of the unit pictured broadly equates to a medium cummerbund, with a length of 15.5 inches / 39 cm excluding the velcro attachment points. Smaller or larger sizes are possible but with the velcro adjustment and elastic stretch medium fits most very well. Beyond the two units ready to go, I intend to do a batch of these with an approximate lead time of two weeks before shipping. I can offer them at £69 inclusive of UK postage & PayPal. For EU people I can do EU tracked shipping for £5 and can quote for anywhere further adrift. I reserve the right to increase the cost in future if this batch turns out to be a massive hassle! However, I can commit to these current units being offered at the quoted £69 rate. Please drop me a PM if you would be interested in an LPC Type MultiCam or Olive Drab QD ROC Buckle Cummerbund. Thanks for reading.