JimmyJamJerusalem

Awesome guys thanks for all the comments and advice For now I'm going to keep the spring standard and although I plan to strip down the box and grease is properly (watching the negative airsoft and BigBirdAirsoft vids they don't seem well greased as standard), I'm going to keep doing my research before I tear the box down. I'm experienced in precision mechanics and from the vids it doesn't look so bad but caution is the better part of valour and all that.... I've bought a mock suppressor which adds 169mm to the length of the rifle so I will measure the stock inner and see which inner gets me where I need to be. plan is to use ZCI Tightbore as suggested. Do you measure the barrels total length or minus the amount that's inserted into the hopup? The Edge comes with a rotary hopup are we of the opinion that this needs to go? If so I'm a tad confused how to identify a suitable replacement? Then as suggested a maple leaf 60* rubber keep em coming

That's great thanks

That's awesome, thanks for the detailed response.... SO to look at some of the points raised there 1, Mock silencers. Sounds perfect, a quick scan of patrol base doesn't yield so much. Plenty of mock suppressors on a 14mm CCW thread. Are they all capable of housing a new inner barrel or are some of them just for looks? 2, Springs - perfect, that was just the info I needed. Just need to idnetify what the standard spring rate is (I think I read M140 somewhere but need to confirm). 3, Gearbox strip down - I'm defo looking to do this as the vids I've seen on the edge range usually resolve that the shimming and piston greasing isn't up to much so I want to learn to strip it safely and grease appropriately. 4, Hop Ups - Are these generally interchangeable? I struggle to find any compatibility info when looking at parts like this? How do you know if it will fit your gun? Thanks again for your response

Hi guys. I'm looking to get into modding my RIF but for a newb it's an effin minefiled!!!! Was hoping for some advice please on mods that are compatible with my model and some tips to get it to where I want it So I've go a SA E25 EDGE Specna Arms - SA-E25 EDGE™ Carbine AEG (patrolbase.co.uk) Which I really like the look of. When I chrono'd she was down at 299FPS so for me there's room to optimise it within the rules and/or I'd consider pushing it to DMR territory. Don't really do CQB; spend most time in forestry type scenarios at mid range and am a little frustrated lining someone up and my bb not reaching them.... The E25 is totally standard currently so would like to look into replacement springs (how can I identify which springs are compatible) I'd also like to look at extending the barrel slightly and if I can do this with a silencer on the current outer barrel and just feed a posh inner barrel down into it so as not to dramatically change the look of the RIF. Any other relevant mods/advice greatly appreciated