-
Posts
42 -
Joined
-
Last visited
-
Feedback
100%
danlangster9721's Achievements
-
Time Left: 5 days and 13 hours
- For sale
- Used
SCG Rifle Wrap - can be used on pretty much any RIF. Purchased less than a month ago and used once - Upper Scope section was cut into two parts so it could fit over scope rings without the need to remove the scope from mounts. £70 new, asking for £40. Message with any Qs£40
Bishop's Stortford, Hertfordshire - GB
-
Stalker Brown Oak Leaf Suit - M/L w/Balaclava & Crafted Goggles
danlangster9721 posted an advert in Gear
This advert is COMPLETED!
- For sale
- Used
Stalker Brown Oak Leaf Suit - M/L w/Balaclava & Crafted Goggles - Suit upper and Balaclava has been crafted with additional KMCS packs - have the left overs from a couple packs I can chuck in as part of the deal. Nuprol Mesh Goggles have been crafted using KMCS mesh and leaves from packs. Message for any questions.£110
Bishop's Stortford, Hertfordshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Kicking Mustang Hide Holster for MK23. The base is a Kydex holster, for an MK23 and is wrapped in official Pencott Greenzone cordura. A small admin panel is fitted with a Kydex mag holder, but can also be used for attaching molle pouches. Ideal setup for a crossdraw, which results in less movement when compared to a typical DTD holster for a MK23. Paid £130 when new, looking for £60 now. Message for any Qs£60
Bishop's Stortford, Hertfordshire - GB
-
Time Left: 5 days and 11 hours
- For sale
- Used
Upgraded MK23, has Hadron H-Arm V2, Hadron triple Screw TDC Plate, Flamingo 50 bucking, Maple Leaf Inner Barrel & Sniper Mechanics HEXX 16mm Suppressor. Have been running this on .40g BBs but will hop .45/.48s as well. Two mags are working fine, one mag has the usual TM Baseplate Leak - will need to be repaired. message for any offers£150
Bishops Stortford
-
Time Left: 5 days and 10 hours
- For sale
- Used
Decided to finally partways with my Silverback TAC41-A, as I’ve since moved over to GBBR. As you’ll see from the description below, this has had almost every single internal part upgraded. Current build sits at 2.22J using a 0.45g BB - build is as follows: TAC41-A - £529 TAC-41 A Handguard £80 DTSS .308 Suppressor 24mm £45 Vector Optics Matiz 2-7x32 £70 Sniper Mechanics WASP Piston (Medium Weight & Long Airbrake) £82 Sniper Mechanic TAC-41 Dampened Cylinder Head £21 Rapax 2J Light Pull Spring £18 Longbow Chub Nub £5 Sniper Mechanics x Hadron Medusa Slim TDC Hop Adjuster £20 Stalker “Morpheus” Carbon Steel 330mm £40 Silverback 70 Degree Bucking - £5 LongBow BB Guide Rings £17 X2 Spare 110rnd Magazines (3 total) £50 Total Retail Value: £982 The RIF has been well maintained, I’ve typically stripped, cleaned and lubricated any necessary parts after each game day it has been used on. One small point to note is the Stock Pin which allows the stock to Hinge has been replaced with a cutdown Nut and Bolt - the original fell out. This doesn’t in anyway impact the usage and functions as normal, was cut down with a Dremel to reduce the size of the bolt. Price has been adjusted on cost of the rifle to accommodate for this. Additionally this bundle will also include: X2 Spare Brass Inner Barrels (one 330mm and 280mm) - £NA Rapax 3J Spring £18 Spare WASP Piston Parts & FPS Rings £NA Hadron V1 Tac Nub £9 4 Pack of Silverback 70 Degree Buckings £15 Stock Piston, Cylinder Head, Spring Guide, TDC Hop parts. £NA Can do Postage or Collection - Postage to be arranged at Buyers expense. Happy to negotiate a bit on price but won’t go too far below asking price given the amount spent on this already. Message for any questions.£550
Bishop's Stortford, Hertfordshire - GB
-
-
This advert is COMPLETED!
- For sale
- As new
TM P90 brand new in box - was won in a raffle but AEGs aren’t my thing hence the reason for sale. These retail anywhere from £260-£300 - priced below this for a quick sale. Message for offers - open to swaps if they’re reasonable to the value of the advert.£230
Bishops Stortford , England - GB
-
This advert is COMPLETED!
- For sale
- Used
Sadly need to part ways with my TAC-41 Lite (CNC Aluminium receiver) as I need the money outside of airsoft. There's been a lot of money spent on this RIF and it shoots brilliantly, pretty much on par with my fully upgraded SRS! Comes with x2 48rnd mags, which I've found to be enough to get by most games on normal skirmishes. Comes with spare parts pictured and a Tac41 box. As you can see from the photos this is in excellent condition, has seen 4 game days and has been well looked after, cleaned and re-lubricated after each gameday. Currently running at 2.17J with Hop set for 0.45s as seen in pictures. There is a 70 degree silverback rubber fitted, along with the WASP's medium weight sleeve and longest airbrake - range is fantastic and it's consistent in acheiving this. Full breakdown on the upgrades and what's been spent on this RIF... TAC-41 Lite - £299 EdGi 6.01 AEG Barrel - 330mm £95 Sniper Mechanics WASP Piston £83 TAC-41 Dampened Cylinder Head £22 Longbow Chub Nub £5 Rapax 2J Spring £16 Hadron TAC-41 Medusa £20 Sniper Mechanic HEX Suppressor £30 - old 16mm that has been modified to a 14mm thread. TAC-41 Short magazine (48rd) £16 Tac-41 Orange Guide Rings £14 Total spent £600 as new. Message for any questions/offers.£370
Stansted, Essex - GB
-
woody549 left Positive feedback for danlangster9721
-
This advert is COMPLETED!
- For sale
- Used
Selling my FULLY Upgraded SRS, this was originally a A1 Stealth Recon Scout that’s been converted into a G-SPEC build with close to £1,000 spent all in. Set up to run 0.45g BBs at 2.2J with pracitaclly a whisper of noise, this has run flawlessly for me since day 1! Thanks to the Flaming 60 and the Kraken Hop unit this can comfortably lift a 0.45 or 0.48 out to 90m or so. The RIF has been well looked after, cleaned and serviced before and after each gameday. Prior to sale, I will clean and fully service the RIF for the new owner, so it’s ready to go from day 1. Includes: SRS-A1 Stealth Recon Scout Converted into a G-Spec build – £400 Upgrades listed below: EdGi SRS Chameleon SAP Kit - £135 Rapax 2J Blue Spring £17 Sniper Mechanics Teflon Fluted Cylinder £15 Kraken SRS Ultimate Edition £100 Sniper Mechanics Flamingo 60 Bucking £7 "Morpheus" Dual Bore Hybrid Barrel 420mm £75 Silverback QD DTSS Dummy Silencer .338 (24mm CW) £50 Aluminum Barrel Spacer for SRS DTSS Silencer £9 Silverback SRS Open Piston Sear £25 3 Aluminum Magazines fitted with extended followers £25 Each 2 Steel Magazines fitted with extended followers £22 Each SRS Monopod Plug £6 SRS Handguard Thread Protection £13 £950+ spent everything included. Additionally in the box is... Rapax RMS 2J Spring Spare Edgi Sap Piston Parts Faceless FOW Nub SRS Fast Hop X2 Stalker 60 Degree Buckings X1 Stalker 60 Degree Bucking (Gen 2) SRS Sear SRS Front Handguard SRS Standard Cylinder, Piston and Spring Guide SRS 16 Inches Sport Barrel There is some light amount of “Shoe Goo” remaining on the RIF from the Ghillie craft that was covering the front end – If the new buyer would like this removed I can do this for them with some rubbing alchol. Selling to downsize my collection. Buyer to Cover Postage + PayPal Fees. Feel free to message with any offers or Questions.£540
Stansted, Essex - GB
-
-
-
-
-
Ghilliejosh reacted to an advert: Novritsch Amber Ghillie Suit - KMCS Crafted
-
This advert is COMPLETED!
- For sale
- As new
For sale is a Kicking Mustang Hide Rig in Pencott Greenzone. Perfect for mounting holster systems such as DTD and magazine pouches. I've had my MK23 DTD holster fitted to the large panel and SRS mag pouch on the small panel - perfect light weight rig for short Skirmish games. Comes with a large and small panel as pictured. Very comfortable to wear and a brilliant designed bit of kit.£35
Stansted, Essex - GB
-
This advert is COMPLETED!
- For sale
- Used
I am selling my much-loved MK23 as it’s not getting the usage it deserves. The MK23 is a beast and can easily hop 0.40g bb’s, with range often beyond most AEG’s on the field. Deadly quiet due to the baffled TM suppressor, filled with foam baffles and the “Fart Flat” mod made to the front to assist the noise suppression. If you’re looking for an out-the-box Sniper secondary, this is the one to get! Upgrades include: – Maple Leaf Crazy Jet Inner Barrel – Maple Leaf Autobot Bucking – Hadron H Arm – Hardron Single Screw TDC plate Comes with an original (wrapped in camo) TM Suppressor filled with foam baffles to dampen the sound, DTD holster and molle adapter for the holster, 2 TM MK23 mags (hard to find in stock at the moment) and an original TM carry case. Any questions drop me a message.£160
Stansted, Essex - GB