StuartP

Hello Folks, For sale I have my Arthurian Airsoft Excalibur Safir in nearly new condition, works perfectly, comes with upgraded Maple Leaf Bucking and SHS High Speed Gears. Comes with original box and Mag (Unused) Any questions, please feel free to ask. Price includes Fees and postage. Thanks for looking. Features Aluminium build with polymer stock 10″ M-LOK rail system Short 20mm rail along the top of the weapon Adjustable stock Enhanced M4 pistol grip 2x QD sling mounting points Single-point sling plate at the rear of the receiver Adjustable flip-up sights 14mm CCW thread It comes with 300 round high-cap magazine A quick change spring gearbox 8mm bearings reinforced tappet plate 15 metal-toothed piston Average FPS: 335 Fire modes: safe/semi/full auto Runs off 7.4v Lipo or Li-ion batteries Length (stock collapsed): 700mm Length (stock extended): 790mm Inner barrel length: 270mm

For sale I have a G&G CM16 SRS, I purchased the rifle second hand for my starter gun, it worked well for me when i was using it as a primary, however I have bought a few more guns and no longer need to keep the rifle as a backup. The rifle is in working order, but its been boxed and unused for a year. I believe the rifle was originally a two tone that was re-painted before I purchased it. Rifle comes with everything you see in the photos, front grip, iron sights and the Magazine selection of Mid and Hi Caps, plus the original GNG mag. Comes in original box. Price includes fees and shipping (within the UK) G&G Armament CM16 SRS Combat Machine Other Features: G&G ETU Re-programmable Trigger & MOSFET System Fires in Full Auto / Three Round Burst Modes Stops firing when Battery charge too low to protect batteries Lightweight Polymer Body Full Alloy internals Polymer hop-up unit 14mm CCW Flash Hider thread Rear Left Side Sling plate Full Length Top Rail for Large Sight / Scope Setups Removable Flip-Up Ironsights Ironsights adjustable for Windage / Elevation KeyMod Rail System for Modular Grips, Torches and Lasers Six Position Adjustable GOS-V3 Retractable Stock System CR123A Battery Storage Compartment in Stock Rotating Butt Plate to access Battery Storage Accepts Crane Stock / Butterfly Style Batteries Rear Wired V2 Gearbox Ambidextrous Mock Charging Handle Finger Ridged Pistol Grip Mock Gas Block and Tube Ambidextrous Magazine Release In-built Blade Fuse Mini-Tamiya Battery Connector

Hello all, I have for sale my KWA RM4 T10 Ronin, this RIF has only seen about 10 skirmishes since new with 10k BB's through it. Comes upgraded with Gate Titan, Maple Leaf Hop rubber and Omega Nub, SHS piston and piston head (With originals) and 7 Mid cap mags ( 4X120 3X 30/120). This really is a great gun, such a good feeling with the Kinetic feedback, really gives you a kick. Only selling due to upgraded to a TM MK18. The Electronic Recoil Airsoft rifles are back! The Ronin T10 is the next evolution of KWA’s patented AEG 3 design. Featuring the Kinetic Feedback System this AEG with Electronic Recoil will give you that satisfying kick with every shot in semi-auto and a giddy sensation when firing almost 20 rounds per second in automatic mode. KWA’s upgraded gearbox will now accept popular electronic trigger groups like the Gate Titan allowing for even more airsoft performance upgrades. Along with major improvements to user ergonomics such as the redesigned PDW stock as well as external upgrades like KWA’s new SOCOM-Style Muzzle Brake and MS120 mid-cap magazine, the T10 makes a return in a compelling package sure to be 10 out of 10 in anyone’s 6mm airsoft arsenal. Price includes fees and postage, any questions, please just ask. Thanks for looking!

Hello all, I have for sale my AW Custom G18, great little secondary, works perfectly, pretty accurate for what it is, has a few small scratches towards the front where its been holstered, (You can see in the photos) other than that good condition all round. Mag is air tight and shoots reliably. Always fun switching the dial to full auto. I also have the carbine to go with it on another advert, can do a deal on the postage if bought together. AW Custom is proud to announce the Armorer Works Custom Hex Cut GBB (AW-VX0201 – Black) featuring our signature hex cuts and hex porting to reduce overall weight of the pistol in addition to providing an aggressive gripping surface. Whether you’re putting this pistol through it’s paces at an IPSC/Action Air competition, or skirmishing it, this pistol will consistently outperform the competition, putting shots downrange accurately, and with blistering speed. Features: + Armorer Works signature lightweight H.EX- slide + Cut-off slide for reducing extra weight + Ultra-light recoil, and crisp, agile blowback cycling + logo engraved on outer barrel + Threaded outer barrel ready for mounting compensator or silencer + Luminous fibre rear sight and front sight + Skeletonized polymer lower frame with stippling process + Integrated accessory rail for mounting flashlight and laser + Pre-installed Armorer Works H.EX-cut magwell + Bottom of the trigger guard designed with two finger groves making it possible to achieve a higher firmer grip with the support hand + Enlarged magazine base for better grip while reloading Box Length: 319mm Box Width:171mm Box Height: 51mm Package Gross Weight: 1015.8g Pistol Length: 200mm Pistol Height: 134mm Pistol Weight (No Mag): 516.5g Magazine Weight: 278.6g Inner Barrel Length: 93mm Muzzle Velocity: 320FPS Price includes fees and postage, any questions, please just ask.

Hello all, I have for sale my Theta Optics Rhino Scope, I bough this to go on a build but found a more suitable scope, so didn't end up using it. Its surplus to requirement so decided to sell it. Its in perfect working order and like new. Features 4x Fixed Magnification Backup Red Dot Sight Illuminated Reticule Mil-Dot Sight Picture 2 x Side 20mm Rails Integrated 20mm Mount Fits 95% of Airsoft Guns Clear Sight Picture Windage/Elevation Adjust Perfect for Short-Medium Range Solid Alloy Construction Package Includes Theta Optics Rhino 4x32 Scope with Micro Red Dot Sight Cleaning Cloth User Manual Allen Keys Price includes fees and postage, any questions, please just ask.

Hello all, I have for sale my AW Custom Tactical Carbine Conversion Kit for a G18, in excellent condition, comes complete with key and QD attachment. *** Please note the pictured pistol is NOT included with this listing*** *** Pistol is for illustration only**** I have the AW G18 to go with it on another advert, can do a deal on the postage if purchased together. FEATURES: - High strength polymer construction - Plug and play installation - Comes with an integrated front sight and adjustable rear sight - Folding skeleton stock - Multiple Picatinny rail panels for accessories COMPATIBILITY: - AW VX 01 / 02 Series - WE spec G 17 / 18 Series Price includes fees and postage, any questions, please just ask.

Hello all, I have for sale my KWA RM4 Ronin MK18 Build, comes with everything you see in the photos, this RIF has only seen about 10 skirmishes since new. Comes upgraded with Gate Titan, Maple Leaf Hop rubber, Eotech clone Hybrid sight system, MK18 Rail, 7 Mid cap mags ( 4X120 3X 30/120). This really is a great gun, such a good feeling with the Kinetic feedback, really gives you a kick in burst mode. The Electronic Recoil Airsoft rifles are back! The Ronin T10 is the next evolution of KWA’s patented AEG 3 design. Featuring the Kinetic Feedback System this AEG with Electronic Recoil will give you that satisfying kick with every shot in semi-auto and a giddy sensation when firing almost 20 rounds per second in automatic mode. KWA’s upgraded gearbox will now accept popular electronic trigger groups like the Gate Titan allowing for even more airsoft performance upgrades. Along with major improvements to user ergonomics such as the redesigned PDW stock as well as external upgrades like KWA’s new SOCOM-Style Muzzle Brake and MS120 mid-cap magazine, the T10 makes a return in a compelling package sure to be 10 out of 10 in anyone’s 6mm airsoft arsenal. Price includes fees and postage, any questions, please just ask.

Hello Folks, For sale I have my KWA QRF Mod 1, I'm testing the water with this one as I reluctantly listing it for sale. The performance is excellent, the build was set up for fast trigger response semi auto (I play at a non full auto site) however the rate of fire is also hitting 29 rounds per second, FPS is adjustable but minimum of 345. Comes with original box, FPS adjustment Key, six mags including all the upgrades listed below. KWA QRF Mod 1 360 Magazines X6 50 Hi Speed Motor 40 GATE Titan advanced 126 Maxx Trigger 25 Maxx Piston 20 Upgraded Spring 10 Extended Battery compartment 20 Maple Leaf Hop rubber 10 Maple Leaf extended Inner barrel 25 Silencer 15 M-Lock handguard covers 12 Any questions, please feel free to ask. Price includes Fees and postage. Thanks for looking. Features High quality build by KWA KWA AEG 2.5 V2 Based Gearbox MLOK hand guard Pistol calibre AR style receiver Airsoft 6mm BB Gun 22'' / 26.75'' in length 8'' in height 6.75'' outer barrel Safe, Semi and Fully Automatic Firing Modes Adjustable hop-up unit for range and accuracy Ambidextrous magazine release Ambidextrous mock bolt release Switch Life Extender (SLE) Ambidextrous Sling Plate MP5 Style magazine release 80 round MP5 Style curved magazine PDW style three position sliding stock Adjustable fps with quick-change spring Extended mock charging handle PTS BUIS flip-up 20mm RIS / RAS ironsight pair PTS Polymer Pistol Grip Full top length 20mm RIS / RAS Rail Removable 14mm CCW Flash Hider Battery storage compartment in the stock Mock gas block and tube 18:1 Gearset 9mm Ball Bearings Reinforced gearbox shell

Hey folks, For sale is a Raven MEU Railed 1911 pistol in digi camo as pictured. Its only been skirmished a few times. The RIF is stock, comes with the original box and manual etc. Includes the Co2 conversion kit. Price includes shipping and fees. Any questions, please don't hesitate to contact me. Thanks for looking, Features Part of NUPROL's RAVEN Series of Pistols Replica of the Modern MEU 1911 Realistic Gas Blowback Airsoft Pistol 20mm Accessory Rail Slide Locks back when the Magazine is Empty Threaded Outer Barrel Beavertail Safety, preventing firing without hold the pistol correctly Ambidextrous Hammer Lock Safety Heavy Duty Alloy Construction Textured Removable Grip Plates Rear Lanyard Loop Modern Integrated 1911 Ironsights Works with both NUPROL RAVEN 1911 Gas and Co2 Magazines Includes Upgrade CO2 Recoil Spring Replacement Spare O-Ring and Nozzle Kit Included Package Includes MEU Railed Series 1911 Gas Blowback Pistol Green Gas Magazine Instruction Manual Barrel Bushing Removal Tool Replacement Nozzle and O-Ring Kit CO2 Recoil Spring

Hello folks, For sale is a pair of Raven MEU 1911 Extended Co2 gas magazines, one is BNIB and the other has been used with two co2 canisters, so nearly new. Price includes postage and fees. Any questions please ask. This is the MEU Extended Magazine for the Raven 1911 pistols. If you have a RAVEN 1911 pistol and you want stronger recoil, better gas efficiency in the cold weather, and a larger capacity then this CO2 Magazine is for you. SPECIFICATIONS Extended Magazine CO2 Powered 36rnd Capacity Alloy Construction Polymer Feedlips Takes 12g CO2 For RAVEN 1911 Pistols Good Cold Weather Performance Strong Recoil Ideal for Using Pistol as Primary Spare Feed Lips Included

Hey folks, For sale is an Ares AS01 Striker in black, nearly new condition (Purchased last Summer), the RIF has only been used a hand full of times in the garden, shoots well and as expected. The RIF is stock, comes with the original box and manual etc, one additional magazine and loading tube included as pictured. Please note the Bipod and Scope are not included in the listing. Price includes shipping and fees. Any questions, please don't hesitate to contact me. Thanks for looking, Features Sets the new standard for entry range sniper rifle Short bolt pull Fluted outer barrel Front universal bipod mount point Interchangeable grip system Ambidextrous rear sling loop plate can be switched from left / right 19cm long fixed 20mm RIS / RAS rail for large sights and scopes Top-down Hop-up unit for precise setting Hop-Up unit adds range and accuracy by imparting spin on the BB Adjustable Hop-up unit for use with a range of heavyweight BBs 22mm Clockwise threaded outer barrel Cocked warning marker Single pin removal to remove the bolt Uses common AEG style springs Stabilised inner barrel Magazine guides for easy insertion 45 round mid-cap magazine Ambidextrous magazine release Extended magazine release around trigger guard Ergonomic stock design

For sale I have a G&G CM16 FFR A2, I purchased the rifle second hand for my starter guns, it worked well for me when i was using it as a primary, however I have bought a few more guns and no longer need to keep the rifle as a backup. The rifle is in working order but I havent used them for over 6 months so may need some cleaning before a skirmish. Rifle comes with everything you see in the photos, Sound Hog, grip and the Magazines selection of Mid and Hi Caps, plus the original GNG mag. I am happy to ship at the buyers expense. G&G Armament Combat Machine CM16 FFR A2 Features: High rate of fire Railed handguard Sliding stock Rear wired / Mini Tamiya Accepts M4/STANAG Magazines Microswitch Trigger MOSFET Polymer hop-up unit 14mm CCW Flash Hider thread Rear sling plate Lightweight alloy rail system Easy Access Battery Compartment

For sale I have a G&G CM16 SRS, I purchased the rifle second hand for my starter guns, it worked well for me when i was using it as a primary, however I have bought a few more guns and no longer need to keep the rifle as a backup. The rifle is in working order but I havent used them for over 6 months so may need some cleaning before a skirmish. I believe the rifle was originally a two tone that was re-painted before I purchased it. Rifle comes with everything you see in the photos, grip and the Magazines selection of Mid and Hi Caps, plus the original GNG mag. SRS will come in original box. I am happy to ship at the buyers expense. G&G Armament CM16 SRS Combat Machine Other Features: G&G ETU Re-programmable Trigger & MOSFET System Fires in Full Auto / Three Round Burst Modes Stops firing when Battery charge too low to protect batteries Lightweight Polymer Body Full Alloy internals Polymer hop-up unit 14mm CCW Flash Hider thread Rear Left Side Sling plate Full Length Top Rail for Large Sight / Scope Setups Removable Flip-Up Ironsights Ironsights adjustable for Windage / Elevation KeyMod Rail System for Modular Grips, Torches and Lasers Six Position Adjustable GOS-V3 Retractable Stock System CR123A Battery Storage Compartment in Stock Rotating Butt Plate to access Battery Storage Accepts Crane Stock / Butterfly Style Batteries Rear Wired V2 Gearbox Ambidextrous Mock Charging Handle Finger Ridged Pistol Grip Mock Gas Block and Tube Ambidextrous Magazine Release In-built Blade Fuse Mini-Tamiya Battery Connector

For sale I have two guns, I purchased these second hand for my starter guns, they worked well for me when i was using them as a primary, however I have bought a few more guns and no longer need to keep these as backups. Both are in working order but I havent used them for over 6 months so may need some attention before a skirmish. I believe the SRS was originally a two tone that was painted before I purchased it. Guns come with everything you see in the photos, sound hog muzzle device, grip and the Magazines selection of Mid and Hi Caps, plus the two original GNG mags. SRS will come in original box. Both the guns are stock appart from the FFR has a Purple Promy hop rubber. Ideally collection would be better, but i can post the items if the buyer covers the shipping / Paypal fees. G&G Armament CM16 SRS Combat Machine Other Features: G&G ETU Re-programmable Trigger & MOSFET System Fires in Full Auto / Three Round Burst Modes Stops firing when Battery charge too low to protect batteries Lightweight Polymer Body Full Alloy internals Polymer hop-up unit 14mm CCW Flash Hider thread Rear Left Side Sling plate Full Length Top Rail for Large Sight / Scope Setups Removable Flip-Up Ironsights Ironsights adjustable for Windage / Elevation KeyMod Rail System for Modular Grips, Torches and Lasers Six Position Adjustable GOS-V3 Retractable Stock System CR123A Battery Storage Compartment in Stock Rotating Butt Plate to access Battery Storage Accepts Crane Stock / Butterfly Style Batteries Rear Wired V2 Gearbox Ambidextrous Mock Charging Handle Finger Ridged Pistol Grip Mock Gas Block and Tube Ambidextrous Magazine Release In-built Blade Fuse Mini-Tamiya Battery Connector https://www.patrolbase.co.uk/g-and-g-armament-cm16-srs-combat-machine G&G Armament Combat Machine CM16 FFR A2 Features: High rate of fire Railed handguard Sliding stock Rear wired / Mini Tamiya Accepts M4/STANAG Magazines Microswitch Trigger MOSFET Polymer hop-up unit 14mm CCW Flash Hider thread Rear sling plate Lightweight alloy rail system Easy Access Battery Compartment https://www.patrolbase.co.uk/g-and-g-armament-combat-machine-cm16-ffr-a2