AndreasHayes1
-
Posts
5 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by AndreasHayes1
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- As new
Hello all. I am looking for metal mid caps at around the 100 BB mark To be used with a Cyma MP5-A3 Any help would be greatly appreciated, they are really hard to get a hold of when not imported.. Regards.NO VALUE SPECIFIED
Ellesmere Port, Cheshire - GB
-
Yeah seems i screwed up ! Im going to take the barrel off the old one and the one i modified to get it turned down to be exactlly like the old one, dont own a lathe unfortunatly but do eveything else to modify one lol
-
We'll...seems ive broken it ! Cant get any pressure from the piston but havent even messed with it. it still cocks and locks back then gets releaesd when you fire it. It has shot once or twice but other than that it fires but the BB doesnt leave the cartridge ! lol Ugh...I did make a barrell and install that with sealent around the hop and bucking where it gets fed into but that is all clear with no lumps from the hop unit so i'm a bit conffused! Any help if anyone knows anything at all would be appreciated. Thank you.
-
Well i have a plan for the hop up to create a perfect air seal ocmpared to how it, i do engineering work so have some plans in mind to modify a barrel and the hop to work well. I can also make steel versions of anything that will end up breaking but will have to find out which bits when they do. The power and piston are my main concerns really, as i said im not trying to get insane power or anything but i think with a few good modifications and some .38-.40's i should be able to get it accurate enough to have some down time sniping.
-
Hello all ! Recently getting back into Airsoft after a 12 year break... not cool!Anyway, I have just got one of these to convert into a sniper stick.Now before you go off on one at me saying about shell ejection and how it's not upgradeable I will have to beg to differ.For one, you can use shell catching bags which I have and it does work, and also there is springs the right width out there to upgrade a bit of the power at least.Anyway, I have taken measurements which are as follows. Sping wise 150MM-L x 13mm - OD x 10Mm - ID Which i believe the Silverback M160 matches this spec pretty well ? Piston size is 750mm - L x 17mm - OD Anyway, if anyone out there which I'm sure there is, is very knowledgeable on these things, then any help would be greatly appreciated, thank you in advance.
