airfish
-
Posts
47 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by airfish
-
-
Hey, I recently damaged nozzle using forward assist when it was iced... original are hard to get, wound you recommend any other? ProWin ?
-
Does anyone have any experience with MadDog Mk18 conversion kit? Is it any good? Cheers
-
On 15/10/2022 at 17:31, Chai. said:
Looking for a holographic sight for my TM M4 MWS that actually can be used as a sight and not just for looks?
Budget is around £200-300. Willing to push up to £400 or I would no more than that.
Looking to also combine it with a magnifier behind it. (Please list some options for this as well)
Look for Bushnell HWS, they are no longer produced since 2010 or so but they are just like eotechs. I got mine for like 130USD. For budget magnifier I also recommend Vector Optics Scot-07. Really good optic for reasonable money
-
Stock one is not that bad when I got used to it. What I cant say about p90's grip that I own and can refer to. Terribly uncomfortable during game
-
Not for me
but I respect
-
But It's so ugly 🤣
-
3 hours ago, Snippy said:
Im sure one night is fine
Just remember to uncock it after use
Thank you
She's a beauty, it would be a pity if anything happens to her 
-
Hello. I have a question. I left the gun cocked for the night (forgot to drop the hammer). Should this have any influence in performance? I know that RS guns can be kept cocked all the time, but there the hammer needs the force only to make the round go off, so I assume in GBBR's it may be different since more depends on the spring strength ? I'd like to know how it is. Cheers
-
On 16/01/2022 at 20:26, SSPKali said:
I put 4 layers of tiny gaffer tape squares on the bottom of the pin nub on the upper receiver. No side to side or up and down play. There is a slim gap between receivers but not noticeable from 3ft.
That sounds like a good idea too. I always like to improve things myself
-
Thanks for reply. Its a relief what you say 😀 However i think it won't be difficult to fix it, just glue a layer of black soda can on this nodule with hole that the pin goes through and it should be fine
-
Hey, do your rifles have movement between reveivers in parallel line? Mine was stiff at the beginning but now upper r. moves a bit against lower from left to right at the end (where back td pin is). Idk what caused that. Is it normal wear after time? (i'm talking about movement from left to right, not axial which i heard is normal after time)
-
Hey!
I just got my new MWS. I'm pretty pleased with its overall quality, but got some issues with mainly two things. First is that the mag valve strikers (?) are metal and rattle pretty bad. IDK why i've always thought this part was plastic (maybe cause its black:) Was it always that way or maybe it is new mags version issue? (because I don't remember anyone mentioning this). The second thing is that the rail on top is not pefrectly alingned with front rail. When i put in a ruler it comes out that first teeth in front is about 1mm lower than the back of the receiver. its not terrible, but for my eye it shows a bit. I'm wondering if that could be corrected by dissasembly and reassebly of the barrel? For other minor things, the lower rail moves a bit, maybe i'll find a way to make it stiffer, also delta ring isn't firm and moves from angle to angle. And the stock looks cheap and rattles, but I've known this already. I'll see tomorrow how it shoots outside, it was dark and late when i got the gun, only made a couple of shots in my room. Awesome:) It is my first AR type replica (and also first GBBR:) and it looks and feels great. Only pistol grip is a bit uncomfy, the finger insert is not where it should be for my hands. Oh, and shoud i had made any maintenance before shooting for the first time? like cleaning barrel or sth?
Cheers
-
No, there are no such regulations where i live
-
65m is very good. But first what i would do is tto replace 250mm inner barrel for full length 370mm.. And maybe cylinder valve - what do you think about Ice pick ? They show very stable fps and power increase at some videos. For a carbine i'd be aiming at 450 fps.
-
Thank you for your answer, its a relief what you say. Actually i've never shot a GBBR, only pistols, so idk what to expect. They say MWS is most accurate, but on Badabing reviews the accuracy test came out rather poor. From what i read, i think it will be better to buy TM gun first. I'm still very eager to own steel gbb mp5, but i think i'll hold back for a while. And they say mws can shoot 80 meters effectively, with only minor upgrade, thats tempting :-)
-
-
I have to also ask about something. There is guy on YT called Azrel and he made a video about we mp5 sd. He bought it pre upgraded with tnt s+ barrel and hop rubber, and he showed a target he said he shot at 20m indoors. It was better then many aegs imo, grouping was like 6-7cm. Even Marui mws at that distance goes all over A4 paper on most reviews i watched. What you guys think about that ?
-
Right, shame it won't be SD verion and mostly shame they dind't do GBBR instead 😕
-
On 08/06/2021 at 10:00, Mad-Al said:
If youre going to reduce the barrel length then expect less consistency and a large fps drop, i know barrel lengths dont make a big difference beyond a certain point but they are not particularly long in these anyway.
You mean fps consistency or accuracy? A5 version has about 20+ cm and it does well, I want 17cm, so not that much shorter
On 08/06/2021 at 10:00, Mad-Al said:If youre going to start messing around with dampers to reduce noise you are also going to reduce recoil, at that point you might as well just get a bolt recoil one or wait and see if tm do a ngrs of the SD and save yourself a fortune.
Its your call but you seem to be buying a gun that isnt designed or built for the purpose that you have in mind.
The bolts have recoil and are quiet (no metal bolt slamming back) and as long as you dont mess with them are decent perforers, i love the WE but the bolt will perform better and more consistently and be significantly cheaper and quieter.
Bolt recoil, you mean AEG ?
-
I don't have mp5, just want to buy it :-)
-
On 04/06/2021 at 22:01, sjhirst said:
Nope, nothing written on the boxes from what i can see.
I purchased them from milspecsolutions.
I did some research and it seems that they sell it with v1 mags... And i assume that if its no written otherwise, spare mags are also v1. Not 100% sure, but it looks like it, and all pictures on every site show this too much curved mag. Actually its no big deal, at some point it looks kind of better than original😂
16 hours ago, gunbod007 said:The TM is also quieter.
The WE MP5 bolt is loud as fuck to be honest with you.I would consider what BigStew said about making dampeners
16 hours ago, gunbod007 said:I agree with the sentiment that it is a fun gun to run now and then. I personally use my MWS as my main gun and the MP5 is for short games.
Dou you run mp5 completely stock?
-
I don't have instagram, but maybe on your spare mags boxes there is mentioned if they are verison 2 ? And if it is, you could compare them to the one that came with the gun if they are the same
-
Where did you get it from? And the mag that now comes with replica - is it version 2 (with accurate shape) ?
-
2 hours ago, BigStew said:
I should have added I had an SDi played with for all of one game da before punting it. Was not impressed how ever it was second hand and I play out doors on Scotland.
How cold was there?
35 minutes ago, Jossy457 said:I bought one from a friend few years ago and i never love it, I felt like i wasted my money .
Why?
THE TM MWS thread
in Gas Guns
Posted
How about ProWin? Only these are available on wgc now, and i may be also interested in increasing some fps