gandalfthegay

Cheers, ill have a go with the spring trying to keep the lever down but im not sure if its going to help as the lever doesnt come off the trigger switch until after its fired, so the immediate problem is it firing in the first place which is because the trigger pull isnt long enough to fully push in the trigger switch.

First dip into airsoft, bought an AEP just to mess around and shoot some cans. after a couple days shooting it the trigger got less and less responsive until the gun wont shoot anymore. The battery is charged and wires are connected and it does fire when I open up the gun and manually push the trigger lever further in. Ive looked at quite a few videos and forums to see if I can find a similar issue but no luck. As far as I can tell when I pull the trigger, the little black box with the metal plate isnt pushed in enough to activate the motor and fire, so I put a shim between the little box and the lever, which resulted in only automatic fire. it looks like when the gun fire in semi automatic the level is pushed upwards by the force of the shot causing the little box the slide under and back into its default position and so a shim is not going to work. im pretty sure im missing something, I dont see why it would be designed so every time it fires a piece of plastic would scrape against metal to reset. also looked at a MOSFET thinking it would make the whole trigger lever useless but seems I had the wrong idea about that. any info would be greatly appreciated dont know if you need the specific model as I think they all work the same but its a CYMA CM.127 Cheers