Adenley
-
Posts
67 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Adenley
-
This advert is COMPLETED!
- For sale
- Used
An old and battered SWAT VTG 4 second blank firing grenade with 2 pins 209 primer adaptor and priming tool. mechanism tested and working at the time of listing. £35 including fees and PP fees£35
- GB
-
This advert is COMPLETED!
- For sale
- Used
(Re-listed and updated) part assembled was giving this a few years ago by a close friend and I have found it very difficult to find much about this, other than what I believe to be one of Tokyo Mario’s early AEGs. Trademarks and all that malarkey now I may be mislead but I believe this came out in 1993 .(it does have adjustable hop unit) I have searched as many forums as i can but cannot find the AEG version only the springer. A few YouTube videos about this but very little info This will need some work, service, shimming alignment all of that fun stuff. Everything to my best knowledge is here for the complete assembly. In a bag is the two body pins and mock bolt carrier, I actually have two screws left over… the cables also need to be fed through the front end to the battery connector. * This does also cycle, bit noisy but it works the motor has been swapped out to an ICS turbo 3000 as the original TM has metal inside the motor ( i think a loose screw made its way inside from my parts box) The gearbox has not been opened and is still factory Cosmetically there is has hairline splits in the upper receiver pin holes which sit in the body (very common), and small piece missing from the front sight post for pin, see photos . Body work is rather good for its age, it’s 90 percent polymer with only the stock tube and a barrel support in metal. This could be a great additions to someone’s collection. This is functional but it’s just a bit old and tired and needs some love. This might be a hard shift but I'm open to reasonable offers no mag included £90 including postage and fees£90
-
Appreciate the input, thank you kindly
-
I was giving this a few years ago by a close friend and I have found it very difficult to find much about this, other than what I believe to be one of Tokyo Mario’s early AEGs. Trademarks and all that malarkey now I may be confusing this with something else potentially replicating a colt “1993” model or if this was manufactured in 1993.(it does have adjustable hop unit) I have searched as many forums as i can but cannot find the AEG version only the springer This is currently dismantled as I hoped to refurbish the gearbox as typically it was sluggish and slow but have sold the rest of my collection unfortunately. And selling as is. Everything to my best knowledge is here for the complete assembly as I kept it all together. Cosmetically there is has hairline splits in the upper receiver pin holes which sit in the body, and small piece missing from the front sight post for pin, motor feels a bit gammy, see photos. But can be assembled fully . Body work is rather good for its age, it’s 90 percent polymer with only the stock tube and a barrel support in metal. what are we thinking chaps, information was limited from what I found online and could be desirable for a collector, but also discontinued and proprietary and requires knowledge to assemble, and from what i remember it was bad enough dismantling Ive exceeded my sales post so thought I would see what others think, im going chucked this on the boneyard for £100 all in P+PP which is around £15 - seem reasonable for rarity in my eyes but also could be a one way ticket to macks knowing my luck s
-
This advert is COMPLETED!
- For sale
- Used
For sale is a never fielded cosmetically as new body condition ASG CZ P09. This is the green gas version. Polymer Slide Reason for sale on boneyard is slide catch won’t lock on empty as the magazine has lost a small fragment of the lip that meets the catch bar. (This *should be rectified when using a new or other mag) magazine baseplate is missing also, this magazine does function and feed despite that. magazine is gas tight, gun cycles and fired. Chrono at 273fps on a .25. No original box included postage including fees sent parcelforce 48h £40 any question please reach out£40
- GB
-
This advert is COMPLETED!
- For sale
- Used
For sale is my PP19 Bizon, as to which brand this is I have no idea, it’s either silverback, S&T or Double eagle. it is the polymer version and does not have a rail mount on it either. Has a metal stock which is folding. Pretty solid surprisingly. I purchased this as a boneyard last year and was in a bit of a state. I rewired the damaged cable and fitted oversized conductors to deans, this was just for proof that it worked and cycled. Some parts were swapped out with used ones. The gun cycles and fires and feeds in semi and full. doing 251 on a .25. What this needs - Rewire strongly recommend as the wires are chunky and was tight getting back in, compression parts replaced, reshim and hop rubber replacement. . Loose selector also. comes with a mid cap and a 1000rd high cap. £100 - including postage and fees (parcel force 48h)£100
- GB
-
This advert is COMPLETED!
- For sale
- Used
ASG Rotex 130mm suppressor in dark earth, these do not come with foam inside. nurpol Bocca quick release suppressor unsure of exact lenght 180mm I think both of these clamp onto flash hiders and do not have threads £35 including postage and fees for both£35
-
This advert is COMPLETED!
- For sale
- Used
WADSN v600 tac light in dark earth will rail mount, pressure switch, button switch, not fielded, No battery included £22 including Postage and Fees Nurpol PEQ box, slight surface rust on screw, no battery. (SOLD) any question please ask£22
-
This advert is COMPLETED!
- For sale
- Used
Cyma MP5K low caps x 4 and mid cap x 1 £20 including postage and PP fees£20
-
This advert is COMPLETED!
- For sale
- Used
For sale is 4 x Cyma mid caps, 1 which is new. I am sure these are all Cyma but im not 100 percent potentially one could be g&g, I have no way of testing any questions please ask £20 posted all in including postage and PP fees£20
- GB
-
This advert is COMPLETED!
- For sale
- Used
WE MK20 SSR AEG Got hold of this a long time ago and it required some work as the hop unit was smashed and the sector gear had snapped a tooth. All gearbox parts were replaced with spares I had lying around (mainly Specna arms) and a new hop unit which took 6 months to arrive was fitted - This needs - the gearbox removing and the ambi selector lined up on the cogs as it’s slightly off selector functions as is but with some wobble due to alignment, new compression parts and or new spring, id replace the rubber personally as it has the one that came with the hop fitted, no idea how that performs. One thing to note this does not have the original flash hider or the front and rear sight. And two screws form the rear is missing but is secure with no wobble. ( Update The missing screws have been located for the rear and are now fitted) Stock pin is also missing FPS is at 230 on a .25, I just chucked a random spring in this when I put it together so either low compression or low power spring or both. A very quick job to sort but the reason i haven't sorted this is I've stopped playing after many years and i think its time to hang it all up now. Cycles and fires Fully functional, pretty much standard parts fitted so typical sluggish motor at 13rps. It’s been shimmed quite nicely and sound’s lovely. Perfect for a DMR build or just someone who likes the SSR. Also has a bolt hold open function A high capacity magazine is included but these are hard to find, standard m4 mags, believe it or not fit into this, it’s a disgusting sight. Standard version 2 gearbox inside. But external parts, hop unit are proprietary. comes with two new selector switches, ordered two by mistake and found the original in the end £110 including fees and postage by parcel force 48h (final price reduction) any other questions or photos please reach out£110
- GB
-
This advert is COMPLETED!
- For sale
- Used
For sale is a specna arms hybrid build which I just chucked random parts into to build. I can’t remember for the life of me what’s going on inside the gearbox as this was originally a negative Airsoft build that shit the bearings It had a perun hybrid fitted which is a bit poorly connected as the wires were damaged. I’d say regard the perun as screwed for when you disassemble. This does however function but requires attention, I have the original Gate mosfet for this which I planned to repair with but just didn’t get the time. it has an octane arms keymod with an integrated suppressor. The inner barrel however is probably not long enough and bbs may hit the suppressor. The recover also has casting errors so requires some force to get the pin in. Cycles and shoots. It’s slightly hot on a .25 at 330fps. A screw is missing from the bottom of the octane arms rail but is secure, the pin for the body does not have a screw but is secure. Motor height adjustment and shimming needed as this was just thrown together. it has everything required to work and also a bag of spares as well. But does require work included is Rifle T1 aim point (no battery) tan crane stock 6 mid caps barrel with flash hider keymod rails, no fixings keymod rail, cannot find the fixing stock tube spare specna arms metal receiver (has casting errors, also bolt catch won’t close as damaged) brand new hop unit fitted collection preferred from Malmesbury but can also post at an additional cost parcel for 48 any questions or photos required please feel free to reach out£100
-
This advert is COMPLETED!
- For sale
- Used
For sale is my Novritsch SSG10, which has done me well over the years but due to leaving the sport I am selling all my gear. It has the following parts fitted * flutted short barrel * suppressor * flutted bolt * maple leafs crazy jet 6.04mm * Tridos TDC * AA hop unit *flamingo VSR v2 * Rapax 2J spring * orange guide rings piston and spring guide remains as standard. included is original hop unit original bolt Original spring, I’m sure the other spring is for a different rifle… rapax fps adjusters nov ssg10 case tdc spares original lenght barrel AGM scope, whilst it is a lovely scope I would replace due to the dial coming loose when adjusted too high. 2 x Magazines FPS tested on .45 which is pretty much bang on the money for the limit at the high end. I did have to ever so slightly chop the spring when I fitted this as it was over the limit. If you dry fire this you can hear the twang from the loose spring but sounds perfect when shooting. There is a small piece of cable wrap over the spring guide which softens the noise when firing as well. I fitted the TDC and Hop unit last year but never got the chance to field this. the magazine has some plastic missing but feeds flawlessly, there should be two but i am trying to locate this so at the moment it’s just the 1. (updated 2nd mag found) the scope is included but its not the best, if you adjust the height to much the dial will come off the post so I would replace with your own. collection is preferred from Malmesbury but can post at an additional cost. happy to answer any question or provide additional photos.£290
- GB
-
This advert is COMPLETED!
- For sale
- Used
Regrettably for sale is my AUG with the rare HBAR steel front end with accurate Bipod and Flash hider. This was a work in progress which I needed to swap the motor cage over and just never got around to soldering the connections back on. I am no longer playing and don’t have the time or desire. Everything is here in order for it to be assembled, and an A2 front end with barrel but needs a new hop unit. * Tokyo Marui A1 body * HBAR front end with 655mm barrel (this is steel so will obtain surface rust) * A2 front end, missing hop unit parts but barrel also included * Spare gearbox casing shell, bearings have snuck away somewhere. * Spare external parts, flash hiders, body pins and stock plate rubbers, feed unit * 4 x High caps Being such a long barrel can make it difficult to achieve the power and range, I had this at 287 on a .25 just as standard Great project for someone who also has a desire for the HBAR aug, the price may seem a little high but only due to the rarity of the kit. May split in the future if there is no interest but for now, no splits or swaps Happy to answer any questions or provided additional photographs. Collection preferred (Malmesbury) but can post at additional cost parcel force 48.£200
Malmesbury
-
This advert is COMPLETED!
- For sale
- Used
This is a fixed 4x optic with back up sights and means of mounting a rail on top. Adjustable elevation, RL. Looked great on my Scar H No major marks or chips with amazing eye relief and a clean optic. Purchased a year ago from DCA comes with original box and sleeve sent via Royal Mail payment by goods and services only £80 Feel free to contact me for any further information or photos£80
-
This advert is COMPLETED!
- For sale
- Used
Boneyard and parts bundle Here I have a collection of random external parts sand some pistols which are only wall hangar worthy if that. Most of these are unrepairable and or missing crucial parts in order to function. All receivers are missing body pins, gearbox, barrels etc, I will detail all the photo below. Selling as a bundle only so please don’t ask to split. One sidearm is not in the worst condition and does function just not very well. Please only contact me if you are interested in the lot Double eagle ump - upper, lower, barrel, hop unit and magazine (no body pins, gearbox) Classic army G36 - upper receiver, flash hider, outer barrel, pistol grip(no additional body pins) JG G3 SAS - upper, lower, pistol grip, stock blank plate (very poor condition, no gearbox, body pins) Well MP5K Aeg - body, barrel, hop, 3D printed hand guard with some damage (poor condition, no gearbox, motor baseplate, body pins) STAR - EBR Chassis only, material ground down on inside of body CYMA M14 body (not pictured) and barrel - poor condition with stippling and paint on the body, plastic m14 barrel Pistols Cybergun P226S co2 - non functioning , slide racks and locks, non functioning, missing hammer parts, non functional magazine included, Unknown brand 1911 MEU, has trades - non functional , no hammer mechanism, slide release missing, grips missing, has a magazine (most likely damaged) which is the only thing holding the slide on. SW40F Co2 - non functional, slide racks and trigger breaks, damaged hammer mechanism, has Co2 extended magazine, which is non functional Old plastic gas M93R, brand unknown but very old, has full trades - non functional, damaged trigger mechanism and missing spring guide and spring, mag release spring. Mag included Army Armament 1911, this actually functions, however the spring for the BBU is bent and possibly some other issues with the housing as excessive gas exhausting, comes with magazine, ex two tone, full metal Selection of G&G, Troy and a magpul style iron sites missing the side clamp and or screws Not pictured yet but soon to be - non functioning Holo Sight I may have more to add to this list, some attachments that I can dig out that are worth something, but that can be discussed if there’s any interest Payment by PayPal goods and services only, sent via parcel force 48 £80 posted including all fees£80
-
This advert is COMPLETED!
- For sale
- As new
For sale is my much loved Scar-H I haven’t played at all this year and it’s time to reduce my collection. This was purchased from combat south with a level one upgrade which just brings the fps up. Apart from that the gun remains as standard. Wired to mini tamiya Much to some of your disgust I have removed material from the stock in the least aggressive way possible which allows for a titian 7.4 to comfortably fit, I have included a photo of this. Being standard its does occasionally have semi lock up as they are a bit sluggish which is just the case of switching to auto Body is clean with no major scratches or marks, all trades clear. Recoil works as it should. Only thing I have noticed is the pistol grip bottom plate does not sit flush, as adjusting it tighter miss-alines the motor, however it is perfectly happy where it is and wont work itself loose. Included is Original box Barrel extension 540rd high cap mag 90rd mid cap Chronographs at an average of 297fps on a .25 Payment via Paypal goods and services only and sent parcel force 48 Any questions or additional photographs get In touch £300 including fees and postage£300
malmesbury - GB
-
This advert is COMPLETED!
- For sale
- As new
For sale is my never been fielded as new condition FMG9, I purchased this in June with the pre installed kit. Bought as an impulse but will most likely not use it in the future. No instructions came with this or a marked box so it will just include the kit, Gun and a standard 24rd gas tight magazine. A note to be careful when folding this back up, I’m not sure how it sits with the 50rd mags if you should choose to get one but I’d watch a video to ensure correct operation and maintenance before use and how to change fire mode. Photos attempt to show how to close The kit is released by holding upright and pushing down on the charging handle. I have not tested this in anyway so FPS is unknown as well as range & accuracy etc Sent via parcel force 48 and payment by PayPal good and services only. £190 including all fees Any question please feel free to get in touch£190
-
This advert is COMPLETED!
- For sale
- Used
GHK G5 Gen 1 magazines x 5 *broken mag removed from sale* The 5 are gas tight but some of the feed lips are tight so minor modifications may be needed by filing to some, please bear this in mind. I am not able to test these as I have no compatible rifle. One magazine is also missing the spring catch which is pushed to removed the bottom plate. This has no effect on operation and is held stiffly on. One feed lip is scratched and it appears as a crack as shown in the photos. Selling in boneyard as I cannot guarantee correct feeding so please take this into consideration that they may not be without hassle. If your smart enough gen 2 lips can be modified to fit. Selling as bundle only Postage via parcel force 48, payment by PayPal good and services only £90£90
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
As new one tigress triple pouch and used 8 fields triple mag pouch. No rips or tears Sent via Royal Mail, payment by PayPal good and services only £18 all in£18
-
This advert is COMPLETED!
- For sale
- As new
Aim 8-32X50E-SF scope As new condition aim tactical scope. I purchased this scope by mistake as it was too magnified for my liking. It is comically very large and aggressive and would look great on a Barrett but feel its too much for Airsoft. Better for a display piece in my opinion It has been mounted onto my rifle and then removed and placed back in its packaging Somehow in the process I have lost one of the scope mount fixings but may be able to locate this. Comes with original box, packaging and manual. Sent via Royal Mail, payment by Paypal good and services only £50 all in£50
-
Negative Airsoft Specna M4 build (High speed/ trigger response)
Adenley posted an advert in Electric Rifles
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
For sale is my Specna Arms original model SA-E07 Edge which was built negative Airsoft (Luke) in 2021 This build was made for fast trigger response, speed and longevity. And to only be used on a 7.4 battery, (do not use a 11.1v with this. It’s Currently doing 25rps with a 7.4 Li-ion.) The build (2 years old) * 12-1 gears with 3 teeth removed * Swapped piston cylinder and head * Perun ABB+ Mosfet set up for pre-cocking and full auto at the moment can be changed to burst or any other preference * high speed motor bits I’ve added ZCI 6.02 340mm barrel (possibly too long for the cylinder. ZCI rotary hop unit (new) ZCI rubber and nub (unsure on performance as only just fitted due to replacing unit) Magpul style stock Bad bits/known issues (cosmetic) * Unfortunately when I bought this I was subject to Specna arms poor quality control from opening the box, there was a casting issue with the receiver pin which has now settled down without to much issue. there is no screw for the pin, threads are also damaged, sits tightly with no movement * Dust cover latch snapped, would not close, this has been replaced with an aftermarket one which does close but is slightly oversized. * Forward assist just decided it didn’t want to be in the gun, about £5-6 to replace * Mock bolt catch not present. * No M-lock rails included * Be advised that this does generate a lot of motor heat due to pre-cocking, burst modes etc * Connections to motor are soldered due to movement of the motor causing the connectors to come loose, (carried out by Luke) so going into this gearbox required de-soldering or the connections This has been an amazing bit of kit to use but I stopped using it ages ago due to m4s just being boring and owning too many RIFs. This is more for a CQB build but I have used this plenty of times outdoors. I have not been inside this gearbox since it was worked on. Chrono results are on a .25 Accessories original box, 2 x 120rd magazines video attached below, sound warning skip to 3:04 if you don’t want to listen to Skylar happy to answer any questions or provide additional information- no swaps or trades UKARA or other defence required PayPal fees and postage included in price, sent via parcel force 48 no exceptions tracking and updates provided - £140 located in Malmesbury Wiltshire if collection preferred£140
Malmesbury, Wiltshire - GB
-
This advert is COMPLETED!
- For sale
- Used
This item is SOLD Unskirmished and brand new cosmetically Cyma MP5K which suffered mosfet failure before it even saw a game. I attempted to put a new v3 trigger switch assembly but due to some issues with the trigger they are not a simple straight forward swap unless you don't want semi auto, a cut off lever is not installed as standard with these either. a perun V3 can be fitted to these with modification to the selector plate but I don’t want to look at this thing anymore. Internally and cosmetically great but the mosfet fires a uniterupted burst on pulling the trigger. includes original box 2 x brand new old school high caps 1 x 130rd mid cap 1 x brand new battery extension 1 x new sling end cap stock plate any question or additional photographs feel free to contact me UKARA or other valid defence required PayPal fees and postage included in price, sent via parcel force 48 with tracking and updates provided. located in Malmesbury Wiltshire if collection preferred.£160
- GB
-
This advert is COMPLETED!
- For sale
- As new
For sale is my M249 Lightweight Para, fitted with a version 2 quick change gearbox and made from mostly polymer. No magazine is included very easy to work on with only 4 screws and one pin to remove the gearbox completely This works with M4 magazines or Box Type Fitted with a gate X-ASR basic mosfet and specna arms basic motor which was better than the original, . Gearbox has been cleaned, shimmed and regressed. No wear on Piston, or gears. O-ring holds Airseal the battery can be fitted under where the barrel slots into place. Chronograph result of an average of 274fps (0.87J) on a 0.25g bb Rate of fire on 7.4v Li-ion 18.1 R/S Rate of fire on 11.1v Li-ion 30.3 R/S I would recommend a hop rubber change due to age Happy to answer any questions or provide additional photographs. UKARA or other valid defence required paypal fees and postage included in price, sent via parcel force 48 with tracking and updates provided No trades located in Malmesbury Wiltshire if collection is preferred.£150
- GB
-
This advert is COMPLETED!
- For sale
- Used
This item is sold For sale is my AR-10/SR-25 style CYMA platinum edition DMR, with 4 x high cap magazines (500rd) and 5 x mid cap magazines (120rd) this is running standard AEG power no major modifications other than an ICS CXP DMR stock which is a lovely piece. ZCI 6.02 barrel ZCI rotary hop unit, plastic brand new installed before listing, fitted with zci rubber and nub included. Unsure on how these perform as haven’t fielded this since. as standard high toque motor micro switch mosfet 18/1 gears steel rack piston 16inch mlok handgaurd steel gears silent piston head and cylinder mock bolt catch 8mm bearings wired to mini Tamiya O-rings have been changed on piston head and cylinder head to sort air seal, gearbox cleaned. You will notice a cylinder rash from where the original o-ring which was crap scarped slightly. No issues with performance otherwise currently running an average of 296fps on .25, this does also have a full auto function bad bits or known issues * The gas block, which luckily is non functional and stays in place securely, the grub screws as you can see are non existent and a bit of a state. No issues from a Functional point of view but just ugly * Not fitted with original flash hider * Missing 1 x grub screw from rail, damage to thread as well, although the barrel is well attached to the receiver securely with no wobble or movement * Left hand side of body has noticeable marks from use, scratches and general wear. * Ex two tone with slight reminiscent of red paint in small parts of the rail, not easily seen. Accessories 4 x high cap mags 5 x mid cap mags original box (in the loft and need to dig out) happy to answer any further questions or provide additional information. No swaps or trades UKARA or other defence required Paypal fees and postage included in price , sent via parcel force 48hour no exceptions, tracking and updates provided - £200 located in Malmesbury Wiltshire if collection preferred.£200
Malmesbury , Wiltshire - GB
