Ranger

EDGI AEG (SRS) Dual Bore Barrel 420mm, bronze. One of the best inner barrel money can buy, i would say one of the essential upgrade for DMR or sniper rifle. RRP 140 from longbow EdGi Dual Bore Barrel - 420 6.00mm to 6.05 ID It's a used barrel, not new, details below Inner surface is spotless, the outter surface has some electric tape residuls (used to stablise the inner barrel in a slightly bigger outer barrel) and also discoloring due to being brass, but mainly cosmetics and do not affect the performance of the barrel. See pictures for more details

EdGi AEG / SRS Dual Bore Barrel 420mm in stainless steel, one of the best inner barrel money can buy. As new condition, spotless inside the barrel, worked flawlessly in my SRS sniper and my G&G AEG. Improve range and FPS and accuracy. 170 quid I paid on longbow website below https://www.longbowbb.co.uk/product-page/edgi-dual-bore-barrel-420mm Price include postage and paypal, absolutely bargain.

Dead Air Sandman-K style mock supressor (c.140mm long) and flash hider, have a couple brand new ones, very high quality. Solid construction and solid lockup. Room inside for tracer module/foam. Price includes postage.

Excellent condition fully upgraded, performs flawlessly. FPS = 345 on 0.2, right on the limit. Best ammo = 0.28 g, easy 60m hits. Scope and silencer not included (original flash hider included) Gate Titan Basic Mosfet (wired to deans) Retro arms aircraft aluminum grade gearbox (you can run M170 spring in it if you want, this alone cost £150 and hard to get)) with 8mm bearings and bushings (much stronger than TM gear box) Full promethues internals (except for the nozzle, which is a FPS alumnium noozle with o-ring) New high torque solink neo magnum motors (insane trigger response) Prometheus bucking Flat hop Precesion stainless steel barrel (can't remember make) PTS stock Recoil spring upgraded M95 Eagle 6 spring (Can supply Eagle 6 M130 spring and turn this to DMR if you want) Come with: 3 x TM mags 2 X 7.4 lipo Tokyo Marui Rear Sling Adaptor Swivel for M4 SOPMOD 416 Recoil Ver (this cost 43 pound new) PTS Grip LED Torch Total cost of this package would be in the region of £1800 Scope and silencer not included (original flash hider included)

Originally an ICS Hera Arms, now fully upgraded to an DMR and shooting accurately up to 75 meters , will outrange most except bolt action sniper. Perform great and recently serviced,body condition excellent see pictures for detail. Shooting around 1.8j on 0.32 BBs and very consistent UPGRADES: GATE TITAN MOSFET Maxx Pro Hop unit MASTER MOD PISTON full steel teeth XT Piston Head CNC Cylinder head XT Cylinder CNC Nozzle with o ring MAPLE LEAF M120 SPRING MAPLE LEAF BUCKING Modify high torque motor Precision 6.02mm inner barrel (363mm), this extend inside the silencer MAPLE LEAF WHISPER SILENCER with barrel stabiliser inside SILENCER COVER PTS stock DEFIANCE GRIP Shimmed and AOE corrected Really well looked after and just not getting used much hence the sale Come with 2 mid caps, silencer, foregrip and 1x11.1v lipo, 1x m100 spring (if you want to convert back to normal AEG, spring change can be done in a minute) Can throw in some iron sights if needed Cost of AEG, upgrades and accessories are around £900 not including labour. SCOPE NOT INCLUDED SCOPE NOT INCLUDED SCOPE NOT INCLUDED Can be tested on collection (Purley) or deliver via parcel force 48

Great condition TM NGRS SCAR-L CQC with Gate Titan Mosfet upgrade and m95 eagle 6 spring, snappy trigger and amazing recoil, great range. 344 FPS on 0.2 Only skirmished once, come with angled grip and 3 mags. One mag has a small dent on it as shown in picture, doesn't affect use.

Action Army Hive Silencer with inner barrel stabiliser, excellent condition Relative light weight for its size, come with a stabiliser inside (help prevent inner barrel movement) RRP would be 75, selling for 55 posted

EdGi AEG / SRS Dual Bore Barrel 420mm Great condition, spotless inside the barrel, slight modification on the two notches either side for better fitment in AEG, worked flawlessly in my SRS sniper and my aeg. 170 quid I paid on longbow website below https://www.longbowbb.co.uk/product-page/edgi-dual-bore-barrel-420mm Price include postage and paypal, absolutely bargain.

Full set of brand new Solink / SHS Spiral Gear Set 16:1. Free O type Lonex spiral pinion (used but in great condition)

Price reduced from 69.99 to 59.99 Hardly used and in great condition, upgraded to brushless motor hence sale. postage 4 pound extra. Cheapest online with stock available is 120 pounds, grab a bargain Tokyo Marui - Samarium Cobalt Super High Torque Motor (Long Type) Product Information - This Motor comes as standard in TM HK417 EV NGRS Series. This is a Super high Torque motor from tokyo marui, it has high compatibillity with both size of can and pinion gear with tokyo marui guns. This is also the strongest motor tokyo marui make. Widely considered one of the best motors available. A true high-torque motor thanks to the excellent Samarium Cobalt magnets and 18TPA shaped armature. Tokyo Marui - Original Part Numbers - 417-28 or Option Part No201 Manual's can be found in the Info Section to see parts break downs or see product photos. Info Section Link Or Link to Interactive Parts Diagram. Because all brands have different dimensions we can only confirm this to be a 100% fit for the Tokyo Marui Guns listed below unless specifically stated otherwise. Confirmed To Fit - Tokyo Marui - HK416C Custom Next Generation Recoil Shock Series Tokyo Marui - HK416D Next Generation Recoil Shock Series Tokyo Marui - HK416 Devgru Custom Next Generation Recoil Shock Series Tokyo Marui - M4 Sopmod Next Generation Recoil Shock Series Tokyo Marui - M4A1 Socom Next Generation Recoil Shock Series Tokyo Marui - M4 CQB-R (Black) Next Generation Recoil Shock Series Tokyo Marui - M4 CQB-R (FDE) Next Generation Recoil Shock Series Tokyo Marui - M4 RECCE Rifle (Black) Next Generation Recoil Shock Series Tokyo Marui - M4 RECCE Rifle (Tan) Next Generation Recoil Shock Series Tokyo Marui - SCAR L (Black) Next Generation Recoil Shock Series Tokyo Marui - SCAR L (FDE) Next Generation Recoil Shock Series Tokyo Marui - SCAR L CQC (Black) Next Generation Recoil Shock Series Tokyo Marui - SCAR L CQC (FDE) Next Generation Recoil Shock Series Tokyo Marui - SCAR H (Black) Next Generation Recoil Shock Series Tokyo Marui - SCAR H (FDE) Next Generation Recoil Shock Series Tokyo Marui - HK417 Early Variant Next Generation Recoil Shock Series

Excellent condition, hardly used at all, will come with USB charger, price include postage and paypal. Turn your dummy suppressor into a tracer unit in an instant thanks to the Acetech AT2000R tracer unit module. The module has a compact housing, a diameter of 32.4 mm and a length of 68 mm, which allows it to fit inside many different dummy suppressors. The AT2000R tracer unit from Acetech detects the BBs by means of an infrared sensor located at both ends of the module. This module comes with the necessary 10440 Li-ion batteries that can be easily charged thanks to the included Micro-USB cable. For best results we recommend using green or red tracer BBs.

Delta Tec Style SFH KP9 Mock Silencer New condition and high quality.

Almost new (bought early this year), used a couple of times and always stored at storage charge. Only one left, 28 pound (postage included, buyer cover paypal) Surplus now due to switching to 7.4v Voltage: 11.1v Capacity: 3000mAh Connector: Deans (T-Plug) Style: Nunchuck C Rating: 16C Size: 19.5mm (0.77in) thick, 132mm (5.2in) long No Puff Titan Power batteries will never puff and become unsafe, like lipos will that have been either neglected or simply aged over time. No Memory Titan Power batteries can be charged from empty or nearly full without damaging the battery. Even if your battery gets low and your device cannot cycle, the battery is still within safe operating ranges and can be charged safely back to 100%.

Price reduced from 69.99 to 59.99 As new condition, upgraded to brushless motor hence sale postage 4 pound extra Cheapest online with stock available is 120 pounds, grab a bargain Tokyo Marui - Samarium Cobalt Super High Torque Motor (Long Type) Product Information - This Motor comes as standard in TM HK417 EV NGRS Series. This is a Super high Torque motor from tokyo marui, it has high compatibillity with both size of can and pinion gear with tokyo marui guns. This is also the strongest motor tokyo marui make. Widely considered one of the best motors available. A true high-torque motor thanks to the excellent Samarium Cobalt magnets and 18TPA shaped armature. Tokyo Marui - Original Part Numbers - 417-28 or Option Part No201 Manual's can be found in the Info Section to see parts break downs or see product photos. Info Section Link Or Link to Interactive Parts Diagram. Because all brands have different dimensions we can only confirm this to be a 100% fit for the Tokyo Marui Guns listed below unless specifically stated otherwise. Confirmed To Fit - Tokyo Marui - HK416C Custom Next Generation Recoil Shock Series Tokyo Marui - HK416D Next Generation Recoil Shock Series Tokyo Marui - HK416 Devgru Custom Next Generation Recoil Shock Series Tokyo Marui - M4 Sopmod Next Generation Recoil Shock Series Tokyo Marui - M4A1 Socom Next Generation Recoil Shock Series Tokyo Marui - M4 CQB-R (Black) Next Generation Recoil Shock Series Tokyo Marui - M4 CQB-R (FDE) Next Generation Recoil Shock Series Tokyo Marui - M4 RECCE Rifle (Black) Next Generation Recoil Shock Series Tokyo Marui - M4 RECCE Rifle (Tan) Next Generation Recoil Shock Series Tokyo Marui - SCAR L (Black) Next Generation Recoil Shock Series Tokyo Marui - SCAR L (FDE) Next Generation Recoil Shock Series Tokyo Marui - SCAR L CQC (Black) Next Generation Recoil Shock Series Tokyo Marui - SCAR L CQC (FDE) Next Generation Recoil Shock Series Tokyo Marui - SCAR H (Black) Next Generation Recoil Shock Series Tokyo Marui - SCAR H (FDE) Next Generation Recoil Shock Series Tokyo Marui - HK417 Early Variant Next Generation Recoil Shock Series

14ccw thread, Surefire Warden Style replica silencers, have a couple of new ones available. (this is not the quick detach type, you need to take off your flash hider and screw this silencer directly onto your outer barrel, full metal.) Let me know if you want Short (c. 90mm) or Long (c. 145mm) type and color (Black or Sandy ). Sandy colour long one sold out, 2 short sandy one left Priced include postage and paypal fee

Price reduced, has a couple available, all brand new. 14mm ccw flash hider included. Only one Long Type (c. 175mm) left. Short Type is now sold out. High Quality, Quick Detach Design, has foam inside, QD Flash Hider Included, A high quality replica suppressor for Airsoft weapons, complete with replacement 'Birdcage' type Flash Hider to attach onto. Price include postage,3 pound discount for multiple purchases.

Used and it has served me very well. Absolutely nothing wrong with it except some cosmetic. It's currently on low speed setting circa 40k, it can switched to high setting via the small switch and it will run at 48k. Very powerful and energy efficient, performance on par (if not better) with my Black Warhead motor. Tested and compatible with Gate Titan mosfet. Postage 3 pound extra

14ccw thread, PBS-1 Style Replica Silencer (high quality) (c.135mm long), have a couple brand new ones for sale. Please ensure you have enough clearance (around c.20mm plus the threaded postion of the outer barrel) between the end outer barrel and the front of the handguard (otherwise the bottom of the silencer will clash with the handguard when you try to screw it on), this shouldn't be a problem for AK type of AEGs. Fit m4 with barrel extended out of handguard as well (a 1 inch barrel extension was fitted to this CRB in picture to allow the silencer to be fitted, it will fit nicely to a spr version of the Krytac without barrel extension) No foam inside Postage includad, buyer pays PayPal fee

Full set of Solink/SHS spiral gear set 16:1, brand new, pinion is D type.

Hi, I am thinning my collection, and I got one of my favourite DMR for sale G&G Wild hog full metal, excellent condition, solid and beautiful gun, everything works perfectly as it should! Upgraded PERUN ETU++ mosfet, which allow you to set different fire mode such as 2 to 5 round burst, single shot only, (current set up as DMR, so single shot only) and precocking, adaptive breaking, battery warning, etc. SHS metal piston head and full steel rack piston, CNC nozzle. Fully serviced shimmed and Angle of engagement corrcted High torque motor Prometheus Purple bucking, flat hopped Prometheus spring Precision barrel Effective range (hit man size target) around 250feet / 76 m (can go further, but this is the furthest target in my garden) Come with scope, grip, and 1 mid cap, 1x 900 round high cap, one 11.1v lipo FPS circa 440 (just below limit) 350 posted or collection from Purley South London

As new action army aac motor 30k speed, long axis Postage 3 extra The Action Army Infinity motors are the best off-the-shelf motors currently available and are the base for all of our custom motors. They feature: CNC pinion gear, second in strength only to SiegeTek Super strong stainless steel shaft Silicon steel helical rotor Precision endbell Enlarged support bearings throughout N42 Neodymium, heat resistant magnets Enlarged PTW size, vertically aligned brushes with braided silver shunt wire

Lightly used and in excellent condition, selling due to upgraded to brushless motor (RRP 73). Postage 3 pound extra Ultimate Infinity CNC U—22000 Motor This is a long axle version, rated to run at 22000 rpm. The latest high-performance motors in the ULTIMATE Upgrade Series are made with CNC machined parts for greater strength and performance, and have all been developed to include the latest technologically developments, in a continuing effort to offer a wider selection of motors allowing the discerning Airsoft player to find the optimal solution for any particular upgrade. For in-depth information on the INFINITY CNC series, see datasheet here. Features: CNC machined aluminum front and back covers CNC machined pinion steel gear CNC machined stainless steel shaft Silicon steel rotor Precision built motor housing Heat resistant rare-earth magnets Enlarged motor-shaft ball-bearing stabilizers High-grade silver plated wiring and larger carbon brushes for improved electrical conductivity The INFINITY CNC motors are designed, with the best features found in Airsoft motors currently on the marked. The result is a motor which is at the pinnacle of what is achievable today. The INIFINITY CNC is the best of the best.