axerite
-
Posts
22 -
Joined
-
Last visited
-
Feedback
100%
axerite's Achievements
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Here I have a bundle of custom parts from my HPA VSR which comprises of: Cerakoted, two tone, custom CNC, hex cut, 260mm suppressor (with foam baffles etc) Cerakoted Action Army receiver Cerakoted Maple Leaf G-spec bull barrel Cerakoted Maple Leaf bolt handle end cap (not pictured) Cerakoted TM bolt handle (not pictured) Gunsmithy CNC TDC turret/nub/arm (for Marui spec hop unit) All in good used condition with light signs of use (e.g minor rubbing where charging handle and receiver make contact). You may want to source an Action Army picatinny rail to replace the one I removed from the receiver – whilst this is an optional part, there is a slight difference to the paint finish where the rail used to be installed. Asking £130 delivered£130
Iwade, Kent - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Here I have an Olight Sigurd Picatinny Mounted Angled Grip / Weapon Light Neat 2 in 1 design to give your handguard both a grip and light from one convenient mounting point with perfect access to an ambi pressure activated switch. Mounted to a RIF that was never fielded and as such, is in ‘as new condition’ (complete with original box, tool, charging cable etc). For more info, see https://www.olightstore.uk/sigurd-light Looking for £70 inc delivery.£70
Iwade, Kent - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Here I have an Olight Sigurd Picatinny Mounted Angled Grip / Weapon Light Neat 2 in 1 design to give your handguard both a grip and light from one convenient mounting point with perfect access to an ambi pressure activated switch. Mounted to a RIF that was never fielded and as such, is in 'as new condition' (complete with original box, tool, charging cable etc). For more info, see https://www.olightstore.uk/sigurd-light£90
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Here I have a genuine Tokyo Marui G36 carry handle inc magnifier sight & backup iron sights from a NGRS. It originally came from a TM G36K but I had it fitted to my TM G36C (see photos). Includes the necessary fiings for mounting to a TM NGRS based G36 - not sure what other G36's it will fit! In very good condition and practically impossible to buy on its own (unless you wait for E6 to re-stock at £219.59 :O) Looking for £50 inc postage.£50
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Here I have a G&G G36K RIS/RAS Front End Kit comprising of: G36K Length Aluminium Alloy R.A.S. G36K Length Aluminium Alloy Outer Barrel and Mount Body Pin I used the handguard from this kit to modernise the look on my TM NGRS G36C (the outer barrel was never used - not sure it would have been compatible). The handguard is in very good used condition, the outer barrel is 'as new'. Looking for £100 inc delivery - paid considerably more! p.s. I have the scoped carry handle available under a separate listing - I can do a deal on the pair!£100
- GB
-
This advert is COMPLETED!
- For sale
- Used
Here I have a very tasty TM G36C NGRS upgraded by KoA a few years ago with some very gucci parts as follows: BTC Chimera V3 MK3 BT (rear wired) Magic box gears Magic box air nozzle Star Wei 35k motor (KoA blueprint) Speed Airsoft blade trigger (very snappy!) Prometheus 6mm bushings Prometheus purple hop rubber Prometheus piston (AOE corrected) Prometheus cylinder head FutureTech SS cylinder Airlab piston head O-ring FPS spring guide FPS piston head EDGI 285mm 5.98mm barrel (r-hop’d) Eagle6 M95 spring As you may have noticed from the photos, this RIF does not come with the default G36C stock, it comes with a very custom, very high quality (the fit is perfect, no wobble!), 3D printed buffer tube which houses the BTC chimera mosfet and a generic retractable M4 stock which offers plenty of battery space (so no more faffing around with the handguard!) Additionally, the original flash hider is missing so I have included a generic suppressor to conceal the slight overhang on the uprated EDGI barrel. The handguard, grip and top rail whilst original, have only just been re-fitted as I had aftermarket parts fitted previously (G&G G36K R.A.S handguard & G36K carry handle with scope - shout if you want to purchase these too) and as such these parts are mint - to be honest, the whole build is near mint as I've not used the RIF for several years! The build is designed for heavier ammo and according to my chrono, is consistently shooting 0.32g warhead BB's at ~268 FPS (1.07j) on both semi and full auto (16 RPS on a half charged 1200mAh 7.4V lipo). I dread to think what I put into this build but am asking for what I think is a rather reasonable £550 inc shipping with the original box and mag. I can also supply a Nuprol Large carry case, a G&G R.A.S handguard and TM G36K scoped carry handle at additional cost should the buyer be interested.£550
Iwade, Kent - GB
-
This advert is COMPLETED!
- For sale
- Used
Here I have for sale a Vortex Venom 6 MOA Red Dot complete with original box, picatinny mount, screws and mounting tool. Sight is in very good, used, condition as per the photos Asking £180 all in.£180
Iwade, Kent - GB
-
This advert is COMPLETED!
- For sale
- As new
Here I have for sale a rather tasty Bolt MP5K with recoil that has been professionally upgraded but is being wasted due to being sat on my wall unused for ~2 years. The RIF is essentially new as the only 'wear' it has seen, has been from the tech bench when it was first purchased around 2 years ago - its been hung on my wall ever since! Included with the RIF is: 2x Bolt branded, mini, 800mah, 11.1 Lipo's (very hard to source, I had to import from Europe) both pre converted to Deans T plugs 5x Bolt branded, 120 round, straight, mid cap, mags (again, hard to find, I had to order from overseas and it took weeks for them to land!) A generic claw mounted red/green dot sight (neat, low profile etc) Additionally, as mentioned, the internals benefit from the following upgrades over stock: SHS 18:1 gearset SHS Steel bearing spring guide Guarder SP120 spring Viton nozzle O-ring Viton piston head O-ring Sector cam custom chip Mod to shell for V2 spring guide PERUN Hybrid V2 Mosfet Warhead BASE 27k Maple Leaf MR 50deg hop rubber Concave nub I've just ran this through my chrono (I took some photos if needed) and with the mini 800mah Lipo at 60% charge, I saw: A stable ~260FPS (1 joule) on Semi with 0.32g BB's 15RPS on FA with recoil enabled @ 265FPS (1.04 joule) 18RPS on FA with recoil disabled @ 265FPS (1.04 joule) I estimate that the gun originally cost me £400, the extra mags a further £80, the batteries a further £60, the sight £30 and the upgrades/tech work £350 I am asking £400 including PF48 delivery (with original card box) or £430 inc a used Nuprol Large box (egg crate foam has some rips but still works fine)£400
, Kent
-
This advert is COMPLETED!
- For sale
- As new
Wolverine Airsoft 10" MTW Forged Tactical with Maxx Hop Unit Here I have for sale what is essentially a brand new 10" MTW Forged Tactical with Maxx Hop Unit. I say "essentially" as it hasn't ever been fielded but has been upgraded with a Maxx Hop Unit and the FCU has been fine tuned by Airsoft Armourer on behalf of the retailor. As per the photos, you get the RIF, a dummy plastic flash hider, a very nice metal flash hider, a mag (with stop on empty), the pistol grip base plate and some consumable spares for the engine. If the buyer wishes, we can discuss a custom package to include used extras such as an additional MTW original mag, a Nuprol Large gun box as well as various tactical attachments such as grips, sights, lights etc This model isn't the easiest to source (currently out of stock as airsmiths, highpressureairsoft & super5ives but is listed universally at around the £1000 mark without the upgrade or fine tuning - I'm asking £850 delivered (collection from Iwade, Kent also available) so somewhere between £200-250 off of retail price.£850
, Kent - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Here I have for sale a Vortex Spitfire 3x Prism Scope. Scope is in great condition and is supplied with original box and instructions leaflet. As with all genuine Vortex sights, their incredible no questions asked, lifetime warranty is included as standard. Can be supplied with alternate middle riser piece (for those who might struggle with a paintball mask for example) which I had machined and anodised by LCs engineering outpost. Looking for £250 inc P&P.£250
, Kent - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Here I have for sale my mint, upgraded (by FutureTech Airsoft), Krytac LVOA-C DMR which is of the following specification: Prometheus SS 6.03mm 387.5mm barrel (r-hop’d) Krytac 30k motor (US spec) BTC Spectre V2 MK2 (PCB locked to semi - reversible) Maxx type E speed trigger Prometheus purple hob rubber FutureTech SS cylinder (non ported) FutureTech M4 hopup unit FutureTech Air Nozzle SHS M130 spring (trimmed) Angled fore grip bolted straight on to handguard This RIF was built to my specification back in 2019/2020 however was only ever used for 1 round of 1 game and hence the fantastic condition it’s in. I’ve seen new guns come out of the box with more notable blemishes/wear than this beauty! As you can see from the chrono photo, this is shooting very consistently at ~1.6j and this is on 0.36g although it’ll lift 0.40+ no issues at all! I paid just over £420 for the gun new (ex accessories) and then spent about £350 upgrading it. I would like to get £500 inc PF48 shipping for everything you see although am also happy for you to collect from Kent, ME9 8RJ£500
- GB
-
This advert is COMPLETED!
- For sale
- Used
Here I have for sale my mint, upgraded (by FutureTech Airsoft), Krytac LVOA-C DMR which is of the following specification: Prometheus SS 6.03mm 387.5mm barrel (r-hop’d) Krytac 30k motor (US spec) BTC Spectre V2 MK2 (PCB locked to semi – reversible) Maxx type E speed trigger Prometheus purple hob rubber FutureTech SS cylinder (non ported) FutureTech M4 hopup unit FutureTech Air Nozzle SHS M130 spring (trimmed) Angled fore grip bolted straight on to handguard ** Scope not included ** This RIF was built to my specification back in 2019/2020 however was only ever used for 1 round of 1 game and hence the fantastic condition it’s in. I’ve seen new guns come out of the box with more notable blemishes/wear than this beauty! As you can see from the chrono photo, this is shooting very consistently at 325-326FPS on 0.32’s (1.58j) although it’ll lift 0.40+ no issues at all! I paid just over £420 for the gun new and then spent about £350 upgrading it. I would like to get £500 inc PF48 shipping although am happy for you to collect from Kent, ME9 8RJ£500
- GB
-
Hi! I'm working on a custom CNC adaptor to fit a Zentico PT-3 to my G&G RK74 CQB. I've got through a few design iterations to try and find the neatest solution; initially I was trying for a 'drop in' replacement with a view of keeping the gun stock and the part being able to be bought off the shelf to get a bit of a return on the R&D work but due to how poorly the fitting lugs on the back of the receiver are cast, that's not going to be viable as the lugs are not manufactured to a tight enough tolerance. Attached are some photos of the current iteration which still largely relies on the original fitting lugs and makes use of a central pin to secure the new adaptor to the gun but as I've had to allow for the poor quality casting, it's not a super tight fit and thus there is a little bit of side to side rocking. The next version of this adaptor will not be affixed in the same way, this time I will have the two mounting lugs shaved to be square tabs even in shape and size, I will then have a machined rectangular piece permanently mounted between these tabs and have some tapped holes put into either side. The new adaptor will then be adapted to slot over this new piece with countersunk holes to secure itself to the receiver via 2x screws each side. I'll keep you posted with how I get on if you like Cheers
-
axerite reacted to a status update:
I will get photos up when I take the Titan out. Post will be update soon.
