VonGrimm

Hey hi hello
 
Looking to sell on what was once my dream gun. Unfortunately I kept dreaming and now have my eyes set on something else. 
 
The gun is steel bodied I believe and in great working condition but cosmetically-speaking it would benefit from some polish or a paintjob.
When I got this the previous owner(s) had done an extremely crusty job at painting it green for some reason (yes, the Zentico stock was painted green. I don't know why either.) and then an even crustier job painting it black ontop of that so I stripped all the paint off the body. I didn't get around to stripping the replica zentico PT-3 stock, and the paint thinner I had would have damaged the polymer handguard so I just bought a new set, though i will include the old handguard as well as the new. The holes crudely punched through the handguard were to mount rails. The top one can't hold a rail properly, however the bottom one holds a rail perfectly fine (albeit slightly angled forward due to the angle of the lower handguard by default)
 
It comes with 9 WE branded magazines.
6x orange 40rd 5.45 style gas magazines
1x black 40rd 5.45 style gas magazines
2x steel 30rd 7.62 style gas magazines. 1 has had its feed lips removed and donated to the HPA adapter, and one is fully functional but has been HPA tapped. a standard WE gas inlet valve will convert it back to green gas.
 
Internal upgrades are as follows:
- Maple Leaf 229mm 6.02 GBB/AEG hybrid inner barrel
- maple leaf 70degree bucking rubber (intended for HPA, but could benefit from dropping to a 50 or 60 bucking for green gas)
- drop-in short stroke buffer kit 
 
Also included is an AirTac WE AK Magazine adapter to allow the use of AEG AK mags. One slight flaw with this is that the BB retention nub bit sprung out of the adapter and disappeared so when removing a magazine expect the adapter to piss out about 10-15bb's or so instead of the 3 or 4 you get with AEGs normally. 
 
I did sand part of the adapter down in order to make it fit flush around the rivet on the underside of the receiver. It also needs to be installed in halves, which is easy but does require an alen key to split the adapter in two parts, then reassemble. Tbh I'm slightly disappointed in the airtac adapters tolerances. It fits and it works, but its not perfect since it requires a tool to install/remove each time. 
 
Overall its a fun gun especially in close quarters but if running green gas the accuracy isn't amazing at long ranges. Running HPA does make up for that a bit though, and could be a result of me using a bucking that was too hard for poor green gas.
 
This is going to be a big ol' parcel to post so I might end up splitting the lot into two parcels, I'm not sure yet.
 
Collection welcome and very much preferred.
 
May also consider parting ways with the magazines or an adapter separately from the gun for the right prices.
 
I may consider trades but I'd be looking for something substantial of similar value, and the trade would have to be done in person.
I'm NOT going to consider £500 worth of budget M4's, a springer sniper and some Raven 1911s or something.

Open to negotiations on price, but please bear in mind the postage costs, and how much I could get for flogging the magazines alone on eBay.

Hey hi hello

Selling on this FMA Fast Helmet that I no longer have a need for. Only used it once since I bought it earlier this year. 
Sized large and comfortably fits my massive 64cm bonce and includes the quick adjustment twisty dial doohickey on the back to loosen and tighten the fit on the fly. 

Comes with:
2 FMA rubber side protectors (the screws and mounts for them are included and are installed on the side rails if you look at the pictures, but for convenience I will take them off the helmet and attach them to the side protectors when posting.)

A cheap flimsy plastic flip down visor. Bought for shits and giggles but was more of the prior than the latter. The visor tilt is nice and snappy, but the actual fit in the rails is a bit loose. I've also cut a bit of the top of the visor off to make it fit better over the NVG/Cam mount on the helmet, but its not perfect. Will need some tweaking to not just pop off if knocked or caught on gear.

3 covers - 1 used black multicam Emersongear cover that fits nicely, and 1 US MARPAT and 1 RU EMR / Digi Flora cover I got for cheap of Aliexpress. The aliexpress pair are a tighter fit as you can see from the EMR one that's installed in the pictures, but I've added some extra velcro inside the helmet to ensure a more snug fit across all three covers. 

Overall good condition.
Offers welcome
Collection welcome
Otherwise I'll post for £5

Hey hi hello

Selling on this Spitfire tracer unit. Used a couple of times but I have more tracers than I have a need for now so selling this one on. 
Fair condition, minus some sticker residue that I shall clean off. The Stay Spooky is a sticker of course. You can remove that one yourself.

Illuminates fine, holds its charge fine, auto-wake works fine. 

Does not include an 11mm adapter or anything, so in its current state its solely for the usual 14mm CCW threads
 
Offers welcome,
Collection welcome

Bought brand new from Camofans a short while back but I've since got full EMR and Flecktarn outfits so this is surplus to my needs now.
 
Only been worn to test the fit. 
Includes Jacket, Trousers and suspenders.
 
This are obviously civilian reproduction army gear, not SSO or SPOSN military grade gear. As far chinese made gorkas go I'd say its the better quality of the few I've had.
 
Price includes postage
Open to offers

My buddy bought this with the intent of turning it into a DMR project but decided to give it to me after he impulse bought a springer rifle. After having it for a few minutes I can see why. 
 
To briefly sum it up: It works and is competent. Its probably stock internally and is totally usable as a full-auto only backup or for tinkering with on a future project if you're brave enough to tech an m14 (unlike me), however its a bit jank and crusty around the edges.  
It likes to stick after every shot when on semi however it has no issues working on full auto.
 
Overall range is decent, I believe from where I was standing to the end of my garden was somewhere around 20m-25m away and I could the target at the end accurately enough with a nice and flat trajectory each time. It even hits a few of the trees beyond my end wall (don't tell the council that though) without any noticeable dip or lift when the hop-up is dialled in right 
 
My friend was told it was about 340fps but I can't verify that as I have no chrono to test at home. I'd say its a bit lower and closer to 300fps based on the scientific method of using my eyes and having a guess.
The stock is plastic with a faux wood effect and it likes to try wiggle a few millimetres back, but it holds steady. The end cap around the barrel that overlaps the two parts of the stock down at the muzzle end has snapped off as shown in the pics and might be responsible for some of this stock shifting. 
 
There's a little piece behind the trigger that is missing but serves no purpose really other than to stop bits of debris getting in and around the gearbox inside. Don't throw it into a pile of sawdust and you'll probably be fine.
 
The mock charging handle is sadly not very satisfying to use, is very crunchy and has a habit of getting jammed. It serves absolutely no purpose other than a fun novelty anyway as the rotary dial hop-up is accessed underneath in the front of the mag well. 
 
Wired to Tamiya. Comes with 1 high cap mag.
 
Collection is welcome, happy to answer any questions, entertain offers and send videos of it working. I usually post between Wednesday - Friday each week.  

My buddy bought this with the intent of turning it into a DMR project but decided to give it to me after he impulse bought a springer rifle. After having it for a few minutes I can see why. 
 
To briefly sum it up: It works and is competent. Its probably stock internally and is totally usable as a full-auto only backup or for tinkering with on a future project if you're brave enough to tech an m14 (unlike me), however its a bit jank and crusty around the edges.  
It likes to stick after every shot when on semi however it has no issues working on full auto.
 
Overall range is decent, I believe from where I was standing to the end of my garden was somewhere around 20m-25m away and I could the target at the end accurately enough with a nice and flat trajectory each time. It even hits a few of the trees beyond my end wall (don't tell the council that though) without any noticeable dip or lift when the hop-up is dialled in right 
 
My friend was told it was about 340fps but I can't verify that as I have no chrono to test at home. I'd say its a bit lower and closer to 300fps based on the scientific method of using my eyes and having a guess.
The stock is plastic with a faux wood effect and it likes to try wiggle a few millimetres back, but it holds steady. The end cap around the barrel that overlaps the two parts of the stock down at the muzzle end has snapped off as shown in the pics and might be responsible for some of this stock shifting. 
 
There's a little piece behind the trigger that is missing but serves no purpose really other than to stop bits of debris getting in and around the gearbox inside. Don't throw it into a pile of sawdust and you'll probably be fine.
 
The mock charging handle is sadly not very satisfying to use, is very crunchy and has a habit of getting jammed. It serves absolutely no purpose other than a fun novelty anyway as the rotary dial hop-up is accessed underneath in the front of the mag well. 
 
Wired to Tamiya. Comes with 1 high cap mag.
 
Collection is welcome, happy to answer any questions, entertain offers and send videos of it working. I usually post between Wednesday - Friday each week.  

Hey hi hello. I'm reluctantly selling on my gimped out carbon fibre and chrome M1A1 I purchased from a fellow user on AF UK the other year.
Its been an absolute joy to use and a real head turner. Most of those head turns were in disgust mind you. 
 
The base gun is a Cyma M1A1 with a King Arms Silver metal body kit fitted. The original faux-wood furniture has been Hydrodipped in a Carbon Fibre pattern and given a clear Cerakote top which prolongs the durability but as you can tell from the pictures it doesn't make it indestructible and some scuffs have gotten through on the bottom of the pistol grip and some tiny ones towards the rear left side of the stock, so I bought another set of Cyma faux wood furniture which I would use for skirmishes, and leave the previous gimped out carbon fibre kit at home for display purposes. This faux wood furniture doesn't come with its own screws or rear buttplate, so when swapping over you'll have to take the screws out of the hydrodipped ones (be careful not to scratch it now). 
 
NOTE: The original screw for the handguard went walk abouts so I just included the one screw I had spare which unfortunately has too big of a head on it. If I can find a suitable replacement I will swap it over but do bear in mind that the screw sticks out a bit at a funny angle. 
In the event I can't find a replacement screw, you'll want an M6 screw about 20-25mm.
 
The rear sight block has been replaced with a Replica Sig Romeo red dot which is *click* noic, but will need a replacement battery. 
I can also include the real leather sling that the previous owner included, though I forgot to take a picture.

Previous owner also upgraded the internals I will just copy paste from the original advert:

It’s a standard Cyma V6, plastic bushings replaced with Modify V6. I fit a set of 13:1 gears and shortstroked three teeth on sector and the SHS metal toothed piston. The piston has been changed to a POM vented bearing type from AK2M4. The Cyma nozzle has been changed to an O-ring type. Wiring loom replaced for standard Gate Mosfets and included is a Gate NanoHard. The bucking has been replaced with a G&G Green."
Hop has been set for 0.28g BB’s and it’s slinging them at around 290fps (+-350/0.2) the RPS is just over 20 with a 7.4 and just over 30 with an 11.1. There’s plenty of room in the stock for my largest nunchuck style lipo (11.1 2600)
The trigger response is super fast and the gun could make for a very unique CQB load out ."
 
Despite the latter statement I was using it for outdoor woodland skirmishes myself and had no problems whatsoever lasering people at range. 

I had the gearbox serviced when getting my FAL DMR'd recently, just for convenience sake and she still runs like a dream.
 
Included are three Cyma Hi-cap mags and a Cyma 450rd drum - the later of which can be quite cumbersome if you're a short arse with stubby arms like me, so if thats the case I recommend holding the side of the drum mag with your off hand to support the gun when laying down fire.
 
I really really like this gun and despite how awkward it is for me to use, part of me still really wants to keep it. 
The case will be included, however the standard faux-wood furniture will be boxed up and sent separately as there's no room for it. So if sending offers please bear in mind I will be having to send two parcels and factor that in.
Feel free to message me with any questions.

Bought for a 3D printing project but bills require a sacrifice because work doesn't pay me enough. 

The AR-57 works perfectly fine, comes with one mag, and a PEQ box with a small battery (not pictured - will add later)
Feeds fine, shoots fine. Has a surprising amount of heft for something that isn't advertised as steel. No major wobble anywhere besides the stock which is to be expected given that its a collapsible wire stock. The p90 mag also likes to creak due to it being all plastic and cheap. Though this could be the norm for airsoft P90 mags, I wouldn't know. This is the first and only p90 mag I'll ever own 🤡

No steel sights included unfortunately.

A bit of a reluctant sell because part of me still wants to turn this into an even more disgusting monstrosity with some 3d printed gubbins, and my google senses tells me these aren't all that common anymore. 

Happy to provide additional pics or videos of it firing etc. on request. 

Regretfully selling but bills be a bitch.

Had a lot of fun with this compact pew pew, so much fun that at one point I had two (hence the many mags)

In total there's 4x small mags and 4x extended mags (however only 3 of the 4 stendo's have the rubber grip extension.)
To my knowledge there is a slow leak in one of the small mags. (I will mark it with tape on the baseplate so you know which one it is)

Priced roughly like so;
Pistol +1 small mag and +extended mag - £60
Leaky mag - £10
Any other mag - £15 each 

(But for now I'd rather sell as a whole.)
 
Out of all the gubbins I'm currently selling this is the one I'm hoping I can hold on to so I might be a stingy bastard when it comes to offers. 
But if I have no luck then I'll come back with my tail between my legs. 🤡

Postage is £8 due to weight.

Bought from overseas for £180. I'm a sucker for gorka suits and I've been craving something in a non standard camo (by RU standards). 

Then got absolutely shafted on the sizing. Its simply too small for my fat ass, which is wonderful because my old gorka is now too big for my not-as-fat-as-before ass. 
Now I am gorkaless. However that doesn't mean you have to be gorkaless too. Buy my shit. Help me partially patch the gaping hole in my bank account. 

Consists of jacket, trousers and suspenders all the same ripstop-esque material. I'm normally a 60/62 in stuff like this, but this really fits more like a 56/58. 
Height is a 5 I think. Probs about 180-190cm tall.
Jacket comes with inner fleece thats removeable by a zip with all the usual things you'd expect from a civilian gorka suit - elasticated waist and cuffs, arm pockets, adjustable strings, belt loops as well as suspender loops.

Obviously hasn't been worn because I couldn't even get into the damn things. 

Open to offers.
Postage is £5

I bought this a while back from another seller but never really got to do anything with it. I'm more of an AK guy and since then I've bulked up with AA12s, SVUs and GBBs so this thing has seen absolutely no action while in my possession except for a few dozen rounds down the garden. Shoots straight, has decent power and the fire rate is decent. What you'd expect from a not-quite-mid-range all polymer AEG. 
 
Externally it could do with a bit of a clean up with some sticker residue and scuffs here and there but there's nothing glaring or standout in regards to faults. 
 
Comes with matching pink/purple suppressor and a thrown in basic red dot sight. (Does not come with the bipod grip shown in the third pic. I will replace that pic once I get chance to take more accurate pictures) but in the meantime feel free to ask any questions

Happy to consider offers.
Postage is £10.

Check out my other ad for the details on the PKM, the zentico stuff is now off (and sold) so here it is back in it's old school wood. Comes with the polymer furniture. Also available are the PKM pouch for smersh, and more modern molle magazine carrier. It's heavy so  postage not included (but can do), collection from north Lincolnshire. You must have a valid defense to buy this RIF.

Hey hi hello. Here is one design of a few railed outer barrel extensions I've been working on for the AAP-01 GBB airsoft pistol.
This is a replacement for the original outer barrel and uses the same screws so make sure you have those hand.
 
So recently I've had a bit of a personal dilemma. I've always wanted to experiment with a DMR kit/extension but I've always hated the most common ones out there. 
Their pseudo-futuristic-frankenstein appearance just really doesn't do it for me and I love my AAP-01 far too much to taint it that way.
 
What I do like however is Big. Chonky. Hand Cannons. Especially the Desert Eagle.

Which is where I got the idea for this design.  I wanted something sleak enough to serve as a standalone pistol but long enough for a potential DMR loadout whenever I felt like slapping a stock and a foregrip on without it looking like some rejected Battlefield 4 concept art or just a simple afterthought. 
 
My crap patter aside here's a look at the unit itself:

- This replaces the pistol's default outer barrel so make sure you're familiar with how to remove and replace that first. (Its not difficult, its just a two different types of hex head screws).
- Outer barrel length is approximately 178mm in length. (it fits the official Action Army 200mm inner barrel with a bit of room to spare.)
- Outer barrel width is 30mm. 
- The top rail is about 235mm in length
- The bottom rail is around 169mm in length.
- Printed in PLA at 50% infill. Sturdy but not unbreakable. Its not CNC Steel so don't go treating it like it is.
- Lightweight at approximately 180g (according to filament used in Simplify3D)


 
PLEASE NOTE THE FOLLOWING BEFORE YOU BUY:
These are made to order. I will always try to get UK orders sent out first but as I have this listed on more international sites I get a lot of attraction from yankee airsofters across the pond which clogs up my work load. Please allow for 4-7 days production but if its urgent feel free to drop me a message prior and I'll see what I can do. 
 
The stand out bit of the top rail is a weak point due to it's dimensions and will most likely break if mishandled or dropped especially if you have a large optic mounted there. If it does snap off the barrel can still be secured without that top screw mounting point and I'm actually going to list a version without the sticky-outy top rail in the future because it can be paired with the official Action Army AAP-01 top rail and secured together with the optic's mount or a rail riser for a full front-to-back top rail.
 
The sloped end of the muzzle has an imperfect finish which is unfortunately unavoidable due to the way it has to be printed with supports but I know it can be done better so I'm always looking into ways to lessen its ugliness. I've tried to show this in one of the images. The best fix for this is to sand it down gently with some 300-500 grit sandpaper then buff it out and repaint it.
I'd advise painting it to match your AAP-01's top slide/receiver portion anyway for a nice uniform look.
 
 
 
 
If you have any questions at all feel free to ask

Feel free to check out my lacklustre facebook page; https://www.facebook.com/VonGrimmArmoury
(If social media links aren't allowed just give me a slap and I'll remove it)

Hey hi hello. Here is one design of a few railed outer barrel extensions I've been working on for the AAP-01 GBB airsoft pistol.
This is a replacement for the original outer barrel and uses the same screws so make sure you have those hand.
 
So recently I've had a bit of a personal dilemma. I've always wanted to experiment with a DMR kit/extension but I've always hated the most common ones out there. 
Their pseudo-futuristic-frankenstein appearance just really doesn't do it for me and I love my AAP-01 far too much to taint it that way.
 
What I do like however is Big. Chonky. Hand Cannons. Especially the Desert Eagle.

Which is where I got the idea for this design.  I wanted something sleak enough to serve as a standalone pistol but long enough for a potential DMR loadout whenever I felt like slapping a stock and a foregrip on without it looking like some rejected Battlefield 4 concept art or just a simple afterthought. 
 
My crap patter aside here's a look at the unit itself:

- This replaces the pistol's default outer barrel so make sure you're familiar with how to remove and replace that first. (Its not difficult, its just a two different types of hex head screws).
- Outer barrel length is approximately 178mm in length. (it fits the official Action Army 200mm inner barrel with a bit of room to spare.)
- Outer barrel width is 30mm. 
- The top rail is about 235mm in length
- The bottom rail is around 169mm in length.
- Printed in PLA at 50% infill. Sturdy but not unbreakable. Its not CNC Steel so don't go treating it like it is.
- Lightweight at approximately 180g (according to filament used in Simplify3D)


 
PLEASE NOTE THE FOLLOWING BEFORE YOU BUY:
These are made to order. I will always try to get UK orders sent out first but as I have this listed on more international sites I get a lot of attraction from yankee airsofters across the pond which clogs up my work load. Please allow for 4-7 days production but if its urgent feel free to drop me a message prior and I'll see what I can do. 
 
The stand out bit of the top rail is a weak point due to it's dimensions and will most likely break if mishandled or dropped especially if you have a large optic mounted there. If it does snap off the barrel can still be secured without that top screw mounting point and I'm actually going to list a version without the sticky-outy top rail in the future because it can be paired with the official Action Army AAP-01 top rail and secured together with the optic's mount or a rail riser for a full front-to-back top rail.
 
The sloped end of the muzzle has an imperfect finish which is unfortunately unavoidable due to the way it has to be printed with supports but I know it can be done better so I'm always looking into ways to lessen its ugliness. I've tried to show this in one of the images. The best fix for this is to sand it down gently with some 300-500 grit sandpaper then buff it out and repaint it.
I'd advise painting it to match your AAP-01's top slide/receiver portion anyway for a nice uniform look.
 
 
 
 
If you have any questions at all feel free to ask

Feel free to check out my lacklustre facebook page; https://www.facebook.com/VonGrimmArmoury
(If social media links aren't allowed just give me a slap and I'll remove it)

For sale is this mis-matched CYMA M4 AEG I bought second hand a year ago. I believe the lower is metal and the upper is polymer. Comes with one generic high cap mag that was sold with it and a removable carryhandle/steelsight with a few lil things to point out.

- Does not feed bbs. 
It did when I first got it, it fired about as well as any other old stock £100 AEG would but after putting it away for a year and coming back to it it doesn't feed even when flipped upside down or manually feeding a bb into it. Probably just needs a cheap hop unit replacement but I can't say for sure. 

- Outer barrel is missing grub screws
Its held in place with friction from some electrical tape for the time being. It only had one out of two screws from the previous seller but I misplaced it when taking it apart like a pleb.

- Handguard is painted
I swapped handguards between my other M4 projects and this one wounded up with some three tone green paintjob handguard I got in a trade that hurt my eyes to look at so I gave it a quick blast with some bronze-y paint and now it hurts my eyes but significantly less.
 
- Buttstock end cap is a bit crap
It does its job but its a bit wobbly. If you've got any other M4 crane stock suitable for a rear wired gearbox lying about I'd just use that instead.

Besides swapping the handguard and test firing a few rounds through it when I first got it I haven't really done anything with this besides use it as a wall hanger and something to stick my equally crap XM26 on. 

I'm open to offers but weirdos on eBay seem happy to buy V2 gearboxes for £30-£40 so I'd rather just strip it and go there than go too low for the whole thing.

£37 + £8 P&P