VonGrimm
-
Posts
156 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by VonGrimm
-
WANTED - PPS / Tanaka M870 - M4 Stock & Grip Adapter
VonGrimm posted an advert in Parts & Gear Wanted
This advert is COMPLETED!
- Wanted
- Used or as new
After one of these adapters which I believe were PPS branded and were cheap as chips but seem to be sold out everywhere nowadays. Happy to overspend just to get one, preferably with the right screws but its not a deal breaker as long as the mount itself is in fair condition.£30
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Reluctantly selling my beloved AA-12 as it simply doesn't get used anymore. It's sat in a gunbag ontop of my wardrobe for the last year and a half besides the occasional taking it down to show it off to a friend its just collecting dust. Served me well and has pretty good range for an electric shotgun - to the point where I could use it at smaller outdoor venues and keep up easily enough. It makes a beautiful chugging sound as it fires, which is always a head turner when you push up behind teammates to cover them. Its a great support weapon if you don't mind hitting jack shit past 30 metres Wired to deans and by default will only accept 7.4v Lipos as the internal mosfet will deny 11.1v or any other such batteries. There's enough space to fit upto a 2600mAh battery in there from my experience. I've taken it to about 6 matches without it ever let me down. The only small fault is whatever the mock charging handle latch locks onto is missing so it can be slid part way open without too much force. There's enough friction to hold it closed normally but it's only fair I point it out. Happy to provide videos of it if to clear any concerns. There's also two small holes I've perforated the mock charging handle as shown in the pictures so I could ghetto rig a rail solution. The drum mag has some cosmetic wear where I used 800 grit sandpaper to rub off some custom sharpie maker shit - just so you don't catch my secondhand cringe. The drum mag can also be an intermittent if not seated 100% perfectly but once it gets going its usually golden and wouldn't give me any grief for the rest of the day. The standard 90rnd (30 shots) box mags have never caused me any problems - so I can confidently say its the drum mag that's a pissy little bitch first thing in a morning. It also eats 4 (four) AAA batteries. Besides the drum mags doing what drum mags do best, this thing has been good to me so it deserves a new home who will appreciate its definitely not sexual name. (you could just sand it off, if you don't like fun - its only one layer of spraypaint). NOTE: The manufacturer recommends .20g bb's only. Any heavy weight bb's is just gonna reduce your range even further and put strain on the hop units so 0.20g bb's only. Postage is £15 due to size and weight. Gun will be sent in it's soft bag which isn't in great shape but its a functional padded sleeve for it to sit in. It'll then be bubble wrapped to fuck and back. Magazines will be included alongside it. Collection is also welcome and I'd be willing to shave a small bit of the price off. Videos and further pictures happily available on request. Any questions please ask.£300
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
In good working condition. Recently replaced the recoil spring with a shiny new one. I will be including the old spring as a last resort back-up, and a standard length guide rod. This guide rod will be necessary if you wish to use the pistol without the muzzle extension addon. The old spring had been bent by the previous owner but after being bent back into shape is fully functional so I'll include it as a worst case scenario backup. The goofy lower grip is a separate piece and attaches around the trigger guard of the pistol. Could make for a great trench spike. 😈 The muzzly compensatory bit is full metal and adds some extra heft to the end of the gun but is of course just cosmetic. (is also required for the aforementioned grip to not poke out infront and look even more stupid than it already does) Slide and frame are standard WE M92 parts I believe, and the faux-wood plastic Biohaard grips were an add-on. The 3 mags included are as follows: 1x standard green gas mag 1x 32rnd extended Toyko Marui M9 mag (like new, stiff spring will want wearing in just to be safe) 1x standard capacity WE CO2 mag (works totally fine, but has noticeably more power than the standard mags. Cannot check FPS myself as I have no chrono now) They work and feed fine, and are gas tight. The red scribbled out mags are not included. (those ones leak but can be thrown in for cheap) Happy to provide additional pics, videos, etc. just drop me a message. Postage is £10 due to weight. Sent via ParcelForce tracked and insured. Open to offers. NOTE: Laser sight shown in the two pictures with the black wood backdrop is not included.£110
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Selling my old reliable as I don't see me using it for a long time now that my AAP-01 has been boringly relegated back to the role of sidearm. As fun as the drum mag is, its an absolute unit and fucktuples the weight of the gun as you can imagine. In good working condition but as you can see from the picture its been well used. The rubber bumpers have some scuffs but the dirt is is just superficial dusty floor debris and will be easily brushed off before I post it, but I wanted to keep it on for the pics just to highlight the fact that it has indeed been used. Gas tight with no leaks. A little note about shortstroked pew pews: This mag (and probably all the Armorer Works style drum mags I'd imagine) can't keep up with crazy high firerates because of the type of spring they use. Aftermarket versions might be available somewhere? maybe? don't quote me on that. But I put a 250% spring, lightweight skeletal blowback unit and 2 cow-cow shortstroke buffer pieces in my AAP-01 and this mag could not keep up on full auto. I found the sweet spot was 125% and a single, shortstroke buffer bit with the lightweight bolt, so your mileage may vary. If you're running your pistol stock then you wouldn't need to worry. Postage is £5.£75
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Used but in good working order. Won't have a need for a personal chrono for a while so figured I'd sell and spend pennies on something else. Like Thai curry. No original box, but will supply a lil micro usb cable with it. Looking for £35 - postage already factored in to said price.£35
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey hi hello. I'm reluctantly selling on my gimped out carbon fibre and chrome M1A1 I purchased from a fellow user on AF UK the other year. Its been an absolute joy to use and a real head turner. Most of those head turns were in disgust mind you. The base gun is a Cyma M1A1 with a King Arms Silver metal body kit fitted. The original faux-wood furniture has been Hydrodipped in a Carbon Fibre pattern and given a clear Cerakote top which prolongs the durability but as you can tell from the pictures it doesn't make it indestructible and some scuffs have gotten through on the bottom of the pistol grip and some tiny ones towards the rear left side of the stock, so I bought another set of Cyma faux wood furniture which I would use for skirmishes, and leave the previous gimped out carbon fibre kit at home for display purposes. This faux wood furniture doesn't come with its own screws or rear buttplate, so when swapping over you'll have to take the screws out of the hydrodipped ones (be careful not to scratch it now). NOTE: The original screw for the handguard went walk abouts so I just included the one screw I had spare which unfortunately has too big of a head on it. If I can find a suitable replacement I will swap it over but do bear in mind that the screw sticks out a bit at a funny angle. In the event I can't find a replacement screw, you'll want an M6 screw about 20-25mm. The rear sight block has been replaced with a Replica Sig Romeo red dot which is *click* noic, but will need a replacement battery. I can also include the real leather sling that the previous owner included, though I forgot to take a picture. Previous owner also upgraded the internals I will just copy paste from the original advert: It’s a standard Cyma V6, plastic bushings replaced with Modify V6. I fit a set of 13:1 gears and shortstroked three teeth on sector and the SHS metal toothed piston. The piston has been changed to a POM vented bearing type from AK2M4. The Cyma nozzle has been changed to an O-ring type. Wiring loom replaced for standard Gate Mosfets and included is a Gate NanoHard. The bucking has been replaced with a G&G Green." Hop has been set for 0.28g BB’s and it’s slinging them at around 290fps (+-350/0.2) the RPS is just over 20 with a 7.4 and just over 30 with an 11.1. There’s plenty of room in the stock for my largest nunchuck style lipo (11.1 2600) The trigger response is super fast and the gun could make for a very unique CQB load out ." Despite the latter statement I was using it for outdoor woodland skirmishes myself and had no problems whatsoever lasering people at range. I had the gearbox serviced when getting my FAL DMR'd recently, just for convenience sake and she still runs like a dream. Included are three Cyma Hi-cap mags and a Cyma 450rd drum - the later of which can be quite cumbersome if you're a short arse with stubby arms like me, so if thats the case I recommend holding the side of the drum mag with your off hand to support the gun when laying down fire. I really really like this gun and despite how awkward it is for me to use, part of me still really wants to keep it. The case will be included, however the standard faux-wood furniture will be boxed up and sent separately as there's no room for it. So if sending offers please bear in mind I will be having to send two parcels and factor that in. Feel free to message me with any questions.£250
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Had this for ages and was my pride and joy for conventions but sadly I just don't ever see me wearing it again any time soon as I've lost interest in R6 Siege and don't fancy wearing it for airsoft. Its a lot nicer than some of the other mass produced replicas out there, and sure as hell beats the Gearcraft shite - for starters it can actually accommodate a large bonce like mine (approx 62cm) comfortably. As for who made it I wish I could say - I cannot find the emails for it, but I remember that the guy only spoke russian, had a gmail account, and blanked me for 3 months and never uttered a word to me after I paid him via PayPal, during which time his amateur website was defaced and overrun with malware and no browser would allow me to visit it. By all accounts I was perfectly set up to be scammed, but the seller pulled through despite his mute silence and I eventually received this beauty in the post. It even stank of spray paint when I opened the parcel for the first time. (obviously it doesn't stick of that now.) The visor is a big bent uniform slab of metal and has some heft to it so I want to say its steel. The helmet is polycarbonate and the padding inside is sufficient to protect against a fair bonk. If you nut some munter with this on, they're going down like a sack of spuds. Not that I advocate nutting any munters. But you do you, king. This helmet has travelled overseas with me, made me many friends and got me a lot of free plastic branded landfill shite courtesy of Ubisoft. It even nearly crushed my thumbnail off the very first time I laid my hands on it (seriously don't put your thumb in the way of the visor when opening it - it will turn you into a big sniffle baby) So its had a lot of wear and as you can tell it shows through in places around the rubber trim or on the visor stopper. I'm open to offers, and while I'm obviously aware this is just a replica, it is significantly better quality than any of the other chineseium out there so pls bear that in mind.£100
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
All metal parts, in good condition, hardly used and has just been in a drawer since. Not sure of brand but I'm gonna say CYMA as it didn't fit on my friend's old PPS Bizon, but just about fits on my Golden Eagle. Open to offers.£28
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- As new
Both jacket and trousers are RU size 60-62 and height 3-4. (Chonkster sizes that are usually the first to go out of stock) No major blemishes, tears, missing buttons etc. Trousers are like new and were only worn to test fit. The jacket was worn once for an airsoft match (you'll be happy to know it was washed afterwards ) so has the beginnings of the crease marks these cheap canvas-y civilian repro gorkas typically get. Unfortunately the suspenders are a mismatch, and are some other brand in a clone of marpat camo, though they were intended for Gorka pants so they attach and are worn the same way. Please note: Due to working overtime I typically only get 1 or 2 days a week where I finish in time to make it to the Post Office. (One of which is a Saturday, so if you order early-mid week I might not get chance to post until Sat same week)£75
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Airsoft wooden RPK solid stock. Is probably CYMA branded, or JG. Mild scuffs on the outside but it nothing major. Does not come with any mounting screws.£28
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- As new
Something I had in my backup AEG that I've since cannibalized for furniture parts. Gearbox and work fine and is wired to deans. Not sure of spring inside but FPS on 0.2g was about 280FPS I believe, so room for improvement but nothing criminal. Grip has hardly been used, comes with its screw, motor cage has its screws, and the fire selector parts are mostly unused though the main cap/screw has some scuff marks where I had to grip with some small pliers to unscrew it. The joys of AK 's.£45
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Used but in good condition. Does not include the screw or plate to mount it - Will need a handy dandy long screw driver to install. Approximate length is about 28cm I believe. Postage: £36 or £40 posted. Open to offers.£36
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Bought the other month with the intention of using it as a sidearm for riot shield shenanigans but found 1. It was too heavy with all of its front end mods and 2. I just bought an AAP-01C. There's a longer inner barrel added by the previous owner that requires the extended muzzle kit to cover it up. The goofy lower grip is a separate piece and attaches around the trigger guard of the pistol, and the muzzle extension. Could make for a great trench spike. 😈 Slide and frame are standard WE M92 parts I believe, and the faux-wood plastic Biohaard grips were an add-on. The 4 mags included are as follows: 2x standard green gas mag (one has slightly damaged follower. Still functions and feeds fine in this gun with 0.2's, but your mileage may vary) 1x 32rnd extended Toyko Marui M9 mag (the one with the chunky base shown in the pictures alongside the front end mod. (like new, stiff spring will want wearing in) 1x standard capacity WE CO2 mag 1x leaky 50rnd WE extended green gas mag. Also has damaged follower. I recommend TM followers, as I replaced the 50rnd mag with a WE follower and while pulling the spring back to load from the bottom, I accidentally let it slip and it was enough to damage it. Shoots nice and snappy. Happy to provide additional pics, videos, and chrono results etc. just drop me a message. Postage is £8 due to weight. Sent via ParcelForce tracked and insured. Open to offers. NOTE: Laser sight shown in the two pictures with the black wood backdrop is not included.£150
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Bought for a 3D printing project but bills require a sacrifice because work doesn't pay me enough. The AR-57 works perfectly fine, comes with one mag, and a PEQ box with a small battery (not pictured - will add later) Feeds fine, shoots fine. Has a surprising amount of heft for something that isn't advertised as steel. No major wobble anywhere besides the stock which is to be expected given that its a collapsible wire stock. The p90 mag also likes to creak due to it being all plastic and cheap. Though this could be the norm for airsoft P90 mags, I wouldn't know. This is the first and only p90 mag I'll ever own 🤡 No steel sights included unfortunately. A bit of a reluctant sell because part of me still wants to turn this into an even more disgusting monstrosity with some 3d printed gubbins, and my google senses tells me these aren't all that common anymore. Happy to provide additional pics or videos of it firing etc. on request.£115
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Army Armament R36 for sale in good condition with three leak-free mags, includes integrated dual optic carry handle. Lower optic is magnified, upper optic is a red dot. (does not include suppressor but will be supplied with a metal M4 style bird cage flash hider instead) Bought this at the start of the month under the impression I was buying a WE variant, but closer inspection tells me I was taken for a fool and its an Army Armament version instead. Not that there's much difference between the two, you're just paying for the clone and not the original really. Can't comment on the magazines - I assume they're also Army variants but don't quote me on that. Shoots fine and feeds well, not had any issues with it in the garden and even took it to a late night skirmish on the 15th and didn't encounter any problems. Chrono'd at 340 if I recall using red gas. Stock internals, and no major upgrades done though the inner barrel might be after market judging by the length. Reluctant sale, but a leaky AIO meant having to replace just about every major bit of hardware in my PC so my wallet's taken a nasty sucker punch that needs patching up. Open to offers, Postage is £10.£180
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey Hi Hello Selling off some gubbins. Including this here chrono unit. Works fine and never had a problem with it, no damage or major scuffs but might have some minor scratches here and there. Does not come with cable for charging, will require micro USB for that. Will be sent Royal Mail. Postage is £3£40
Mexborough - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey Hi Hello Selling off some gubbins. Including this here little tracer unit. Standard tracer function with the muzzle flash effect feature. Has been used outdoors in wet and damp woodlands so expect a spec of dirt in the crevices here and there. (internally its clean) no adapter so for now its just 14mm CCW threads. Also no charging cable as its just a micro USB. Normally people have dozens of these lying around but idiot here only has one and is needed for many things. Will be sent Royal Mail. Postage is £3£32
Mexborough - GB
-
This advert is COMPLETED!
- For sale
- Used
Bought for a 3D printing project but bills require a sacrifice because work doesn't pay me enough. The AR-57 works perfectly fine, comes with one mag, and a PEQ box with a small battery (not pictured - will add later) Feeds fine, shoots fine. Has a surprising amount of heft for something that isn't advertised as steel. No major wobble anywhere besides the stock which is to be expected given that its a collapsible wire stock. The p90 mag also likes to creak due to it being all plastic and cheap. Though this could be the norm for airsoft P90 mags, I wouldn't know. This is the first and only p90 mag I'll ever own 🤡 No steel sights included unfortunately. A bit of a reluctant sell because part of me still wants to turn this into an even more disgusting monstrosity with some 3d printed gubbins, and my google senses tells me these aren't all that common anymore. Happy to provide additional pics or videos of it firing, chrono'ing etc. on request.£115
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale or swap
- As new
Was after one of these for the longest damn time, but now I finally have it I don't want it. Because I'm a silly man child who also bought back a GBBR G36 and that takes its place in my arsenal. As for this CA33, its like new but without its box as I used that to send off my older HK53. I did go ahead and replace the hop rubber and nub with Maple Leaf stuff I had spare, as the original ones were trash so it now shoots nice and straight (within the range limit of my back garden - approx 20m was as far as I could test) Uses a big dumb chunky full size Tamiya connector with an inline fuse, however does terminate into a mini-tamiya closer towards the gearbox for you to swap out with your own inline extension for a different connection. Things to note: These are older guns and even though it was new from Fubar Bundy when I bought it, it has some build quality quirks such as the mag release being very stiff and funky to engage, and the fire selector not feeling very tactile. It does engage safe, semi and auto but good it'll take some practice or focus getting it to engage semi-auto without over or underestimating it. Otherwise the build quality is nice, definitely nowhere near LCT standards, but still feels sturdy with no major creaking to the plastic lower, stock or the handguard. The mags themselves are 2 mid caps and 2 high caps. They are all brand new so will want wearing in, both the springs and the fit into the magwell as its very tight. The mid caps are a bit harder and more expensive to get a hold of thanks to most overseas retailers having ridiculous flat shipping rates for UK postage (Octagon Airsoft, etc.) Standard MP5 style V2 gearbox, m4 style hop up unit, 6.05mm inner barrel that runs the full length of the outer barrel (don't quote me on the specifics of the barrel). The guns itself is a mild rarity because Classic Army insist on shovelling more M4's onto the market rather than making dope cold war era shit like this. INCLUDES: The CA33, 2 Mid cap mags, 2 High cap mags, Mp5 style picatinny mount, DOES NOT INCLUDE: Original box, the optic shown on 2 of the 4 images. Postage is £8. Will be sent via ParcelForce 24 Will not be able to post until after the Easter bank holiday weekend. As always open to offers.£210
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- Wanted
- Used or as new
Hey hi hello. Finally patching up one of my only major seller's regrets by buying back a Gas Blowback G36 Rifle and ditch some of my AEG's. Mainly looking for a WE G39 of any model (G39C, G39K etc.). Might also consider an Army Armament GBBR too but I'd be happy to pay the premium for a WE. Will also pay a bit extra for charging handle or NPAS upgrades, extra magazines etc. Looking to spend £250 max ideally£250
- GB
-
This advert is COMPLETED!
- For sale
- As new
Hey hi hello. Selling yet another one of my spur of the moment impulse purchases that will sadly never get used for as long as its in my possession. I've spent so long convincing myself I needed another AK only for it to sit in a box under the bed for the last 6 months. Like new and only test fired in the garden for the sake of chrono'ing. Bought from Gunfire.pl back in October and has had an M105 spring fitted to bring the FPS down to 320-330FPS as it was too hot for UK sites with stock spring. No major scuffs or scratches and hasn't been exposed to the elements for more than 10 minutes one mild day in order to chrono it outside. So none of that characteristic E&L rust just yet. Comes with original box though it might be a bit beat ontop where a heavier guncase has rested ontop of it. Internal padding etc. is all fine, includes all the original gubbins, papers, lil oil bottle, etc. Happy to provide more pics and vids, if my bloody dropbox will sync any time soon, otherwise might have to wait till Sunday when I'm back home. NOTE: Does not come with the railed upper handguard as seen on one pic. I need that bad boy, so full wood style handguard. Includes 1 midcap mag, However I do have a box of 5 brand new identical E&L midcaps I would be wiling to depart with for an added price, say £35. Postage is £8 - will be sent via ParcelForce.£190
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Hey hi hello. This is a Classic Army CA53 that's unfortunately stockless but otherwise working totally fine albeit with a few flaws. I suppose it qualifies as a 'project'. Bought this from the previous owner with a fancy shmancy wooden stock (that broke) but he failed to point out a fair few negatives (as well as the fact that the gearbox had been upgraded with a mosfet added which I was surprised at), so in a vain attempt at not being a prick, I'll list them now. - Sleeving on the gearbox-end of the mosfet has started to wear away (wires are fine but might be delicate) - front sling attachment point is missing (i will throw in a hex bolt and nut just to help secure the outer barrel better). - the handguard is for a CYMA MP5 and fits but isn't perfect, could do with a tie wrap or two to keep it from wobbling up and down. - the mag catch is a bit weak. I have a brand new CA33E and it has the same issue so I'm chalking this down to manufacturing tollerance being a bit shit. Giving the mag a bit of a bump once its inserted does the trick 9 times outta 10. - mock bolt/hop up cover is a bit crusty and needs some gentle persuasion with a poke of the finger as well as pulling back the bolt handle. (also an issue on my CA33) - the safety rarely works and will often allow you to fire in semi. - obviously theres no stock. MP5 stocks should fit. That being said it functions totally fine, the range/hop up is serviceable (on par with most stock performance AEG's) the power, fire rate, feeding etc. are all perfectly fine. Shoots .20g BB's with hop applied at 320-330FPS If you like bastardising HK guns with ghetto fixes then all you really need is a stock. Postage is £8, comes with 1 high cap mag.£90
Mexborough, Sourh Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
One standard 25rnd magazine, One 49rnd extended magazine. Both like new and seem gas tight. No major scuffs or scratches and springs still seem fresh. Bought as part of a bulk purchase a while bag but never had a use for them. Postage is £4.£45
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Like new, hardly used. Bought but never worn for airsoft so has just sat in wardrobe with all my other gear. Postage is £4£16
Mexborough, South Yorkshire - GB
-
This advert is COMPLETED!
- For sale
- Used
Regretfully selling but bills be a bitch. Had a lot of fun with this compact pew pew, so much fun that at one point I had two (hence the many mags) In total there's 4x small mags and 4x extended mags (however only 3 of the 4 stendo's have the rubber grip extension.) To my knowledge there is a slow leak in one of the small mags. (I will mark it with tape on the baseplate so you know which one it is) Priced roughly like so; Pistol +1 small mag and +extended mag - £60 Leaky mag - £10 Any other mag - £15 each (But for now I'd rather sell as a whole.) Out of all the gubbins I'm currently selling this is the one I'm hoping I can hold on to so I might be a stingy bastard when it comes to offers. But if I have no luck then I'll come back with my tail between my legs. 🤡 Postage is £8 due to weight.£145
Mexborough, South Yorkshire - GB
