Whisky1

Hey guys, it's been a long time since I've posted anything, but thought Id ask a few questions or atleast get some opinions. So I've had my mws for 2 years now, done so much shooting it's not even fair use at this point (50 cans of red) and it has done a metric tonne of bbs. (not really but you get my point) I have found that my trigger has broken in and is much better then it was 2 years ago, but it's leaves me some what wanting. Now I broke my disconnector where it engages the auto sear (around 10,000 rounds ago.) And thought I'll get round to replacing it when I change the trigger and bolt stop plate. Well that time is now as my bolt lock isn't as reliable as it should be and my trigger is failing to reset occasionally. So my questions are what have you folks done to your trigger boxs??? Wii tech marksman sear's? Guns modify adjustable triggers? Lightweight bolt catch plates? Maybe some precise fettling? Any thoughts or experience's welcome.. Thanks guys, be lucky.

Whoopsy daisy...... My bad bro. 😉😂😂

Just give him time, it's totally worth it. 😁 So guy I got a few new parts for my bday. A magpul B.A.D lever and enhanced trigger guard. It was very time consuming getting these real steel parts to fit and work as they should. But totally worth it. 😁 I also got a pdi raven barrel, now I know that people like them I've had a 7" in my hicapa for years but I must say this one is poor at best the bore quality is shocking and I would recommend staying away from them. Also I some how snapped my disconnector and got it jammed in the Sears so had to strip the trigger down and remove it. Turns out that my rifle will operate with it broken just doesn't engage the full auto sear so it's locked to semi... Just a quick little update on my build. Hope your all doing well and staying safe. 🤟

That kinda sucks for me, I've just ordered a pdi 250mm 6.01 because that's all I could find online. I do have a spare edgi vsr barrel but it's 410mm and I'm running an 11.5 outer.

So vsr barrels fit? I was under the impression that's mws had a different cuts?

I'm still using the stock nozzle spring, it broke at the end but I just made my own coil and it has served me very well, it's still going at 8000 shots.

I'd be very interested in that too Dave. 😉😁

I really like the x range rubbers, but they do wear quite quickly, I've been running one for a few months and have another on order as I've noticed considerable wear.

So with the lockdown, I've been drilling alot. At first i found the mws trigger to be okay, but after a year of shooting I'm now ready for an upgrade. Does anyone have a review on any triggers? I like the look of the g&p adjustable but thats alot of cash for something that has very little information out about it. My misses decided to record me on the sly so thought I'd share. 😂😂 VID_20200412_173144159.mp4

Hey guys, So being locked up and doing alot of plinking I've been getting quite abit of bite' from the trigger guard. So my question is are mws trigger guards real steel compatable? Also do we know what parts are real steel compatable, be good to have a list. Thanks alot guys!!

Coz' two tone be sexy..... 😜

@Davegolf is your man for the nub mate.

I use warriors but slightly different, they are great well made pouches. I recently wanted to carry a mag on my belt so I brought a viper vx mag pouch for £8 I thought at the least I can use it for my speedloader. I was very surprised to see that it was perfect for mws mag it holds them tight but you can draw from them with ease. Not only that when it's not in use they sit flat.

It just looks like your nozzle spring snapped? If it's only that then it's not biggy.

I'm very tempted to give these ago but, I've tried lots of after market magazines for hi capas, and always found them to have tons of issues.

I brought one months ago. Really decent for the price, but takes some fitting to fit nicely.

I had the same issue as I was worried of overfilling but now I fill the mags until they spurt gas from the fill valve, normally 20-25 seconds from empty then about 8 seconds for a top up.

Fire support have got a few angry gun parts in stock, the misses just ordered me a airbourne charging handle for Christmas 😁

I believe that was the someone else Dave. I personally have shot out to 60-70 metres accurately with the X range, if anything I'd say it gives you a flatter trajectory for longer then the tm standard. This is now my go to rubber....🤔😅

Yes got the SixG nub and standard barrel, I have seen that the x range buckings need a large window.

I had issue's with the modify tan, I only ran it for a little while maybe 1000 rounds at best. I can't recommend the modify x range enough, the accuracy and consistency is miles above the traditional mound style buckings. I'm not sure how long it will last but for £8 it's worth ago.

I had issue's with the modify tan, I only ran it for a little while maybe 1000 rounds at best. I can't recommend the modify x range enough, the accuracy and consistency is miles above the traditional mound style buckings. I'm not sure how long it will last but for £8 it's worth ago.

My mws with a lightweight bolt carrier doesn't like anything but nuprol 3.0 this time of the year, I've tried most gases and abbey brut seems very weak even tho it's advertised as their most powerful gas. Will probably have to move to black as it gets colder. What you guys using currently?

Sorry I have no idea what brand the stock is, but it fits okay has a tad of wobble. The grip is a battle axe bcm gunfighter clone. They require sanding on the inner walls to get to fit but it's so comfy and I can't see myself changing it and for £14 from Dave's custom Airsoft it's a bargain!

Thanks Pauly 👍 So the nozzle spring snapped on the top coil going around the pin after a few thousand rounds on nuprol 2.0 gas. I just made my own coil and it's been fine since. I'm currently using nuprol 3.0 and have been for the last 3 weeks. But I have 2 guns modify spares one made up the other just a spare.