Alfie_0

Cheers for the reply all, to answer @EDcase, no I can't pull the mag out. I had some velcro strip laying around, have shoved some of that in the magwell, seems to have removed the play, bit too late to test atm though, might upset neighbours. Only trouble is it has made it a bit of a pain to get the mag out, but is something I can live with

Hello all, Hoping somebody can give me a hand again, got some new EPM1 magazines to try fix my feeding issues, but the aeg will only feed properly when I push the mag up with an audible click, if I do not hold it in that place it drops down again but is still attached to the magwell, just will not feed. I have attached a video of what this small push and click looks/sounds like. Thanks in advance

I’ll have a look at adjusting motor height, binned the garbage specna grip so adjusting it is easy enough now

In my infinite wisdom, I didn’t decide to check what was wrong with it until I had already put it back together, screw just needs tightening. but I can’t be bothered

Asking for a friend, does anybody know of a steel tooth piston and piston head that would fit the TM NGRS HK? Thanks in advance much appreciated

https://youtube.com/shorts/-7cqHl5aJo4 Aster II has done the trick ! Appreciate your help mate, much appreciated. Side note; how does my shimming sound? first time shimming

Yeah, after some research went for the Aster II with the Bluetooth starting to think maybe I should have just left my aeg alone… lol

Cheers for the advice mate, will order a warfet and try throw that in, the x-asr has motor + and - as well as a blue wire from the trigger contact, all housed in the buffer tube. In theory I can just cut off the x-asr and put the warfet in its place no? Wiring seems to be the same?

Evening all, First time doing any tech work and have installed a new Solink 28k lite plus brushless motor and 13:1 gears into my specna edge. The old motor, when tested, works fine, spins freely even by hand etc. The new motor shows a solid red light on the x-asr mosfet and does not spin, will not spin freely by hand either, has a sort of regular interval clunk/click as you turn it. Not sure if that is normal or not. Have seen one post from a guy on reddit (https://www.reddit.com/r/airsoft/comments/nt5kt2/issue_motor_is_causing_a_supposed_short_circuit/) who seems to have a similar if not identical issue, which turnt out to be his mosfet, but of course that's only a single person on the internet so not taking it as gospel. Motor was recieved today brand new in box, with testing the old motor in same environment, those are the only two reasons I've found, either the motor is wankered or x-asr is being an arse Have linked youtube vids and a pic of the x-asr troubleshooting card for reference, not sure why one uploaded as a short sorry. https://youtu.be/Lft10NbVFYI https://youtube.com/shorts/EtoJwS5-LJg?feature=share Any advice much appreciated TIA, Alfie

Cheers for the reccomendations all, much appreciated

Evening all, Just looking for a tech in or around the Suffolk area idealy, who could upgrade my AEG. Any recommendations? TIA