P4radox

Up for sale is my GHK AK, with all the 'flaws' engineered out, and is now a consistent, reliable and efficient fun gun!
It has been named a 105U as i have shortened the outer barrel from 12.5" on a standard 105 to 11" hence the 'U' for short, giving no performance loss but much better maneuverability, especially with a suppressor.
Most recently gamed all day with this at Echelon on Sun 5th this month, 20 mags through it perfect.
It doesnt come with a  gun case, but i could purchase one if the new buyer wants one/and it sent in one, otherwise it will just be extremely well boxed up.
Price includes PayPal fees, Defence required, collection or delivery insured £38.00
Easily the most fun GBBR ive ever owned, an absolute joy to drive and reloads always get attention!
 
GHK AK flaw #1 - the barrels are not square/inline with the bolt assembly, so the nozzle does not mate the bucking perfectly flat, this eats buckings, causes erratic FPS, and big shot inconsistency.
This is because the stamped lower receivers folded edges doesnt allow the sight block/barrel receiver to sit square when it is riveted in at the factory.
To remedy this the sight block/barrel receiver on this has been removed, receiver has been worked, the sight block jig aligned and then TiG welded back in place.
 
GHK AK flaw #2 - the bolt is not properly guided during the the last half of its rearward travel, causing binding and wear to the bolt. Basically it tries to eat itself.
This is because the the front of the bolt which runs in the gas tube is massively undersized, as such it does not offer any guidance/support to the bolt.
I assume this was made like this because of flaw #1 - as the barrel is not square to the bolt, this means the front of the bolt would run out of true inside the gas tube and bind up/jam, so rather than remedy flaw #1 GHK just undersized this part as a workaround.
To remedy this - as the barrel, bolt and gas tube are now all parallel, i could make a nylon bushing (the white part) that runs closely to the inside of the gas tube.
So now the bolt action is super slick and gas efficient.
 
GHK AK flaw #3 - the hop unit and buckings are just pretty rubbish, they move around a lot, not very secure with the inner barrel and buckings are proprietary.
To remedy this i machined in a Laylax MWS hop unit, along with a TDC hop up, running a custom brass Omega type nub, and it now takes standard VSR buckings.
So it now performs like an MWS, 60M effective range with 0.32s @ 320 FPS
 
GHK AK flaw #4 - more commonly known are that most of the hammer/trigger/sear parts break, so these are all now Hephaestus billet steel parts.
 
Externally it has;
Machined in TWI Zenit B-10U handguard
TWI Zenit B-19H upper handguard
RS Zenitco RK-9 tan pistol grip
Kripps custom magwell
LCT Bulgarian 4PC flash hider
Ambi mag release
 
Internally it has;
Prometheus MWS stainless 6.03 inner barrel
SixG Laylax MWS hop unit w/TDC mod
TM bucking and SixG brass Omega
0.9J GHK nozzle
Fast recoil / high speed bolt kit
'Summer' recoil rod/spring currently fitted
This gun is fast!
 
Spares wise;
5x perfect 40rd GHK gas mags
1x perfect 40rd GHK CO2 mag
Spare feed lips and gas route
traditional speed loader device
3D printed speed loader - EPIC!
Spare fill ramp for 3D loader
1x GHK high power nozzle used good
1x GHK high power nozzle new
1x GHK low power nozzle new
Spare nozzle O rings
'Winter' recoil rod/spring
Heavy recoil bolt weight
Original bolt stop
Original trigger/sear parts
RS Zenitco rail panels
RS Zenitco cable tidies
 

Brand new Tachyon V3 pre-assembled. Never used 
 
INFRARED AMMO COUNTER
Displays both number and visual bar with customizable behaviour
6 quikcly-changeable presets of 0-9999 rounds
Color changes at 2/3 and 1/3 of ammo percentage
Can count down or up
Works with any 6mm airsoft weapon
 
3-AXIS MAGNETIC COMPASS
Displays your current magnetic heading
3 Modes: Bearing (Azimuth), 8 Cardinal directions (N,NE,...), 16 Cardinal directions (N,NNE,NE,...)
Critical for proper navigation and tactical awareness
Fully 3D with automatic ground reference - works under any angle and orientation
 
FIRE RATE & DELAY METER
Accurately measure the fire rate (RPM) of your weapon
 
HOP-UP ASSIST
Lights up when the gravitaional force is inline with your Hop-up's axis (i.e. when the weapon is held straight)
Helps you fire BBs with optimal, straight-upwards spin and maintain best range and accuracy
 
REAL-TIME CLOCK
Shows the current time in 24hr format
Helps keep track of important game events
 
BATTERY CHARGE METER
Displays voltage or charge percentage of your weapon's main battery.
Settings for NiMH (8.4 or 9.6 V) and LiPo (7.4 or 11.1 V) batteries
Displays Tachyon's battery voltage for GBBRs and other non-electric weapons
 
PERSONALIZATION
Set up any RGB color for the common UI, background, and 3 distinct ammo counter colors
Change screen brightness on-the-fly with the press of a single button
Toggle on or off various on-screen elements
Rotate the whole screen image by increments of 90 degrees

Tokyo Marui Mk23 DMR
2 good mags
3D printed carbine kit
FPS 410
running 0.43g BBs through it
 
as you can imagine this is silent and fires out to 70m plus
 
428mm maple leaf g-spec vsr inner barrel
50 degree flamingo bucking
suppressor
sight 
buyer pays post and fees
 
 

Rocket launcher, comes with everything from the picture, including postage.

Having to thin out my collection most of my pistols are display items this being one of them I have 2 for skirmishing then have the others on display but the wife is complaining too much now. 
Shoots between 383 - 407fps so too hot for game play
Beast of a gun and very heavy
Valid defence required.
Postage is £8 with Parcelforce 48
Cheers

Airsoft masterpiece 3.9 railed frame 
polished airsoft masterpiece sear 
polished airsoft masterpiece hammer 
Polished cowcow disconnector
cowcow firing pin with spring 
dp/cowcow stippled grip
airsoft masterpiece trigger ring, tuned 
airsoft masterpiece puzzle trigger, tuned 
cowcow trident sear spring , tuned 
airsoft masterpiece magwell 
aip grip screws 
steel thumb safety’s 
tm grip safety
tm magazine release 
tm slide catch modded to fit frame. 
tm 100% hammer spring 
 
tuned to a 11-12oz trigger pull . Smooth and short reset and no creep , super short trigger pull.
 
shot around 1000  rounds and running perfect  
 
perfect condition . 

will take reasonable offers 
 
 

Hi,
 
looking to swap my Vortex Sparc AR & Micro 3X
for a Vortex AMG UH-1
both in good condition and come with box and Lifetime warranty 
 
 

Selling my tm MK23, got a few wear and tear scratches but nothing significant, comes with one working mag and one mag with a leak and a broken mag lip, FPS is variable with weather, usually around 310. Also comes with a 3D printed suppressor which I received from with another rifle I purchased which is included along with the original suppressor. Any questions feel free to ask  

An excellent condition full auto only M249 Para with adjustable stock making this extremely compact this is not for the weak wristed this weapon is as heavy as it is fun also comes with the 2500 bb drum mag with is battery operated and has realistic sound effects of belt feed also comes with 7.4 LIPO 
 
the ACOG in the main pic isn’t included