andrey

Reluctantly selling my beautiful G17
List of upgrades are
 
(UAC) Ultimate Airsoft Custom internals specifically for the TM G17, these are:
- 135% Nozzle Spring
- Stainless Steel Trigger Lever
- Ultra Lightweight Blowback Housing
- Tactical Magwell (Black)
- Match Grade Steel Hammer & Sear Set
- Aluminium Valve Block
- Aluminium Loading Nozzle
- Reinforced Trigger Housing
- Reinforced Hammer Housing
- Fiber Optic
- Steel Fire Pin
- Aluminium Hop Up Chamber
- Stainless Steel Pin Set (x2 spares)
 
• Guarder Marui Glock Series Extended Slide Stop
• Salient Arms Flat Adjustable Aluminium Trigger (Red & Gold Spare Inner Triggers)
•Bowie Tactical Concepts "Detonator" Custom Slide Kit
• Laylax Nineball Power 97mm/6.0mm Ultratight Bore Stainless Steel Barrel
• (New) Laylax Prometheus Purple Hop Rubber Bucking & Nub
 
 3 x Umarex Glock 17 Gen 4 Green Gas 25 rnds capacity GBB magazines, all still new
• CyberGun officially licensed Glock Carry Case
 
A stunning hand gun
Will post at buyers expense 

WTS Silverback TAC41

Selling this due to just not playing at outdoor fields very much.

Comes with a 10x scope
2x standard mags and 1 big mag
Magpull MLOK bipod

Has a variable mass piston
and a spare feed ramp

I don't like to post guns but i am willing to drive 2-3 hours in range of Salisbury 

 

Lovely gun, I shot a few training session with it to practice practical shooting in production category. Hard recoil and accurate.

Hi everyone I have for sale is my Tokyo Marui MP5 NGRS it’s seen a few skirmishes the cocking handle round piece has come off from the previous owner but the cocking handle itself is still functional and has bolt stop feature really cool and adds to realism and it works as it should excellent recoil and an amazing shooter on 0.28s it has 3 high cap magazines and it also has the VFC flash light hand guard attached wired to tamiyah and comes with the box and paperwork I can provide more pictures and videos of it shooting if required I’m wanting £360 plus postage ore £340 collected from TS19 8JR but open to offers any more questions email me on [email protected] ore text me on 07530689244
 
updated with more photos
 
Thanks everyone Andy
 

Started out as a jg bar 10 but the only jg part left is the outer barrel and stock. performs exceptionally well and is extremely lightweight with a very smooth bolt pull, can accurately fling a .43 out 90ish meters no problem at 2.1 joules just below the limit. I get the camo isn't to everyones taste, I used this mostly at humber airsoft situated in a quarry so the contrast of green and a pale sand works out perfectly, not the prettiest rifle in the world but its been built to go, not for show.
 
It has been upgraded and comes with the following
 
UPGRADES
. Action army teflon cylinder and cylinder head
. Action army piston
. Rapax spring
. Action army spring guide
. Action army zero trigger
. Action army upgraded reciever
. Action army 0.3 inner barrel
. Action army hop chamber (red)
. Modify x range 65 degree bucking
. Action army barrel spacers
. Tridos design tdc with grey nub installed (will include all the other nubs with other bits in the box)
 
 
. 1 magazine 
 
SCOPE NOT INCLUDED 
can include scope for an extra £50
 
There may be a few other upgrades I've missed but that's what I can think of off of the top of my head
 
 
£200 + postage 
 
Please note the rifle will be posted disassembled into 2 pieces with the 2 fixing screws in a bag due to the length
 
Thanks for looking
 
 

SSX 303 only used once for an afternoon game, I preferred using my bolt action.
 
Novritsch suppressor
1 x magazines
m-lock qd point
original box
 
£200 posted

Here's my ICS M1 Garand AEG, sadly up for sale due to lack of use. It's in nice all round condition with some marks from use but cycles and shoots nicely. There's a blemish on the right hand side of the stock which is visible in certain light, which doesn't affect the handling or function of the replica. Earlier this year I gave the stock a light sanding and refinished with some walnut stain and beeswax which makes it look nicely aged. This appears to be an early model ICS M1 due to having the 'Springfield Armory' stamping on the heel of the receiver as opposed to the confusing 'Springdale Army' stamping seen on the later ones. Internally it's had the following mods:
SHS high torque motor SHS 16:1 gears Gate PicoSSR3 inline mosfet Wiring replaced for heavier gauge + Deans connector ASG M105 spring Small additional tension spring added to the trigger connector for more reliable reset Some small pieces of dense neoprene added between the receiver and stock for a more snug, secure fit between the two Shooting at around 345-350fps on 0.2g at ~1.1J, so should be suitable for use almost everywhere in the UK. The replica will come with 5 magazines and also a very nice leather repro M1907 sling if asking price is met. Feel free to message me if you have any questions or queries. Sold as seen with no warranty either given or implied. Collection welcome and postage can be arranged at buyer's expense and risk. Thank you for looking! 

All components are pretty much brand new, selling as I have a hi-capa addiction and have already got a new favourite project. Gun shoots far and straight, looks awesome and has a pretty damn good rof. It's based off a standard 5.1 hi-capa and uses the original frame, however it has had pretty much everything you want in a hi-capa done to it. Comes with one magazine, I will list the upgrades below:
 
Internal's:
 - AIP 120% Recoil Spring    
 - Nexspeed Guide Rod + Plug
 - Cow Cow Short Stroke Kit    
 - Waldo Dynamics Nozzle Spring    
 - Flamingo Bucking    
 - Laylax 6.00 Power Barrel
 - Poseidon Ice Pick Flute Valve     
 - Cow Cow Trident Sear Spring    
 - Cow Cow Hammer Power Regulator    
 - Airsoft Masterpiece CNC Steel Hammer & Sear Set    
 - Airsoft Masterpiece Steel Disconnector & Valve Knocker  
 
External's:
 - Nineball Custom Safety Lever    
 - Nineball Custom Slide Stop    
 - Laylax Straight Trigger    
 - NexxSpeed Hammer Protection Pad    
 - Nineball Gungnir Slide    
 - Nineball Threaded Outer Barrel with TDC Modification 
 - Nineball Custom Grip    
 - Tokyo Marui Micro Pro Sight     
 
Price includes pp fees and shipping, let me know if you have any questions or offers

Maple leaf mr hop60/ omega nub
xt inner barrel
shoots 0.85j on a .28 out to 60m 
£200 posted

Selling my TM hk45, it’s runs like a dream and has been my primary for a while now. Theres really nothing negative to say about it.
 
It comes with 2 gas tight mags, TM mock suppressor, an Esstac KYWI mag retainer, Custom Kydex holster made to order by Kydex Customs and a belt.

Happy with collection but postage is on buyers dime via parcelforce 48hr

I am selling this for a friend of mine that got into real guns so now, these toys are collecting dust in this place. Both are like new, collectors as he never played Airsoft. I bought it for him from Taiwan,a few years ago and now, l help him to sale it.
He sucks in making pictures 🫣🙄 this is what he sent me. I also have some videos for the ones who are really interested.
For the ones who don't know it..these are full steel pistols, CO2 powered. 
Price is per piece, p&p included.

I am selling this for a friend of mine that got into real guns so now, these toys are collecting dust in this place. Both are like new, collectors as he never played Airsoft. I bought it for him from Taiwan,a few years ago and now, l help him to sale it.
He sucks in making pictures 🫣🙄 this is what he sent me. I also have some videos for the ones who are really interested.
For the ones who don't know it..these are full steel pistols, CO2 powered. 
Price is per piece, p&p included.

LG LR300 AR style AEG. Been painted in Swedish M90 woodland pattern. Front wired and fires fine in both single and full auto. The gun will need a service and may benefit from a mosfet being added. 
 
I can’t find the suppressor that fits onto the collar mount that’s still attached to the barrel. 
 
the reddot is for show as it got hit please see all the photos 

NOTE:  DOES NOT COME WITH OPTIC
 
Selling my wall hanger!
Never skirmished, since it lives on the wall.
 
Stock internals Real steel TDI Arms X47 rail system imported from the US (used by IDF, RUSFOR, and UKR)  LCT RK6 foregrip  (ZPK-6) Victoptics S6 LPVO 1–6x24  SOLD! UTG ACCU-SYNC optics mount  SOLD! 1x LCT stainless mag and 3x CYMA steel black mags  
No scratches on receiver parts, except very light marks from fire selector (came like that out of the box brand new).
Very slightly marked on the wood of buttstock left side  (see photos).
No wobble, no rattle.
All magazines fit snug without any wobble whatsoever.
All mags feed perfectly without a single issue.
Shoots and functions flawlessly. 
Impeccable condition.
 
 
Will consider selling RIF and accessories separately. RRP prices for the whole package adds up to over £1200!
 
Split prices:
LCT Stainless RIF + 3 extra mags £530 TDI X47 rail system £280 Victoptics S6 LPVO with UTG mount £120  SOLD! RIF + mags + X47 + RK6 (no rifle scope) £750  
£750 for everything as is (minus the optic and gun case).
 
Collection preferred (very close to East Croydon train station). Shipping to UK mainland negotiated separately. 
 
Tested Nov 2024:
Shoots slightly hot but consistently between 280–285 fps, 0.32g BB, hop set to fly straight (1.2J).
I can tune fps down to 1.13J by replacing spring if buyer requires. 
 

Custom kit for SSG10 (barrel should fit other makes)
includes: laylax short PSS outer barrel with cut down inner barrel (barrel has had hole drilled for tridos TDC hop mod, fibre optic front sight mounted and end has female 14mm negative threads)
rear fibre optic iron sight (this screws into second screw hole from rear and includes small screw to add under which holds rear section of Reciever together, 3M extra strong double sided tape also attatched to underside of sight for extra security)
cut down SSG stock with rear but pad glued on and rubber cover wrapping
pictures 5- 9 show how it looks when fitted, I had this set up to 1.14 joules for no minimum engagement and it was great fun with brilliant range for such a short barrel
 
price includes postage and PayPal fees

Unwanted scope, 3x30. It is a solid and good one, l love the big diameter of the lenses but l prefer others. This has never left my home, only for display and garden shooting. Eye relief is about 5cm. Price is £45 p&p

New and unwanted Hk416 A5 by GunsModify gas rifle on the Mws marui system. This sat on my collection and now is time to go as l have others l prefer to use and abuse. Price is £640 p&p
Find me faster on WhatsApp at 07366595627

1x Standard VFC SR25 ECC GBBR
 
3x VFC 20rnd GBB SR25 Magazines
 
Items will be sold as a bundle, not separate.

Total: £650 + P&P
 
willing to negotiate price

T8 staccato C2.
 
Heavily and lovingly upgraded.
Rails polished for an absolute silky action with no rough pull areas. Trigger pull is straight on the wall and has a nice crisp pull through. Full list of upgrade parts below.
 
T8 6mm Proshop Staccato C2
Regular short mag
Medium T8 Staccato base plate mag
Slim tactical magwell
Evoii (HW) RMR - really high quality , good chemical coating , no ghosting , holds zero.
Wasdn APL strobe function light
T8 nozzle + DP high output power bulb
AIP 140% nozzle return spring
Edge V2 titanium grey ultra lightweight blowback unit housing
Flamingo pink 50 degree bucking
Polished inner barrel
Polished rails
Short stroke kit fitted (slide lock on empty)
Trident sear spring
AIP Long type flat trigger 
 
I'm sure I've missed something(s) but will update as and when I remember.
 
It's an absolute pleasure to shoot, really flat trajectory. Slide action is a true joy. You'll find yourself rackin and clackin it like a fidget toy. 
The MOA on the dot is a nice size looks around 4-6moa.
Really fast smooth gun
 

Hello Chaps 
 
I Am looking to sell my pride and joy RIF !!! I have had this maybe 4 years. And can honestly say it is the best gbbr I have ever played with in terms of realism. 
As you can see it has professional treated wood furniture on it l, with a light weathering finish across the metal. 
Colour changed bolt, fg restricted disc so fires under 350 fps, also shoots like a lazer !!! 
 
5 large gas tight magazines 
1 20 round gad magazine 
A real Thompson sling and carry case 
 
I would swap this for either a VFC GBBR FAL but not really another else 
 
Price includes recorded postage but not PayPal fees or you can come collect it from worcester 
 
Olloe 

Absolute beast of a weapon that has turned many heads and sparked many questions. But alas, I cant justify keeping anymore. You'll probably never see one like this again!
 
This was originally the aluminium version with black furniture which has been kitted out with the following:
Genuine soviet cold war era SVD handguard LCT wooden SVD stock, modded to fit 509mm steel barrel from begadi 60 deg flamingo vsr hop 3x extra SVD mags, all working 3D printed SAG-style SVD rail that I designed myself (works really well!) 3D printed flow restrictor disks to regulate power down to approx 1.83J with 0.43g using regular green gas, I have made other size disks and included  
Wooden parts have been finished off in birchwood casey tru oil for the incredible shine. Shoots great in skirmishes for a GBBR, is very loud, and kicks real damn hard.
 
Original black SVD furniture and other stock parts will be included, and also a WE NPAS which didn't really work as expected (reduced kick but skyrocketed power to 4+J).
 
£600 collected around edinburgh, or £630 posted via PF48 due to size and packaging required.

Guns Modify HK416 MWS. Brand new in box, not even had a single BB put through it. Only a couple dry shots (with asg ultrair) to test it functions properly. completely stock internals.
Comes with 1 brand new GM v.3 Pmag gas tight of course and 4 leak free TM stanags.
£750 posted to your door.

People please be aware that this seller is a scammer
he tried it with me in March plus other people 
one of the tricks Is to take payment g&s then refund to send you a request.
and if you don't notice when you accept the request it goes out as f&f 
I've foundand alerted airsoft hub pre fired and airsoft forum of this persons activity's. 
It was another user that messaged me to ask me if it was the same seller
goes by the name of John on most the accounts which are made on the day of posting too.
[email protected] is the PayPal 
in the photos on airsoft hub you will see I circles the pedals to his computer located in Cornwall at first .
on the airsoft forum photos he used the same room with the same pedals and bannister in the background located Glasgow. 
if you have bought this item try to get your money back.
if you payed f&f go to your bank.
and if for the complete off chance I'm wrong I'll apologise. But I'm not.
also if you have bought it it's still being offered to me as of 20mins ago for £400!! I mean what a steal aye? 
the serial number has also been reported to wolverine

You talkin' to me? You talkin' to me!? Well I'm the only one selling this stunning replica of Travis's Smith & Wesson 2" M36, with beautiful (faux) mother of pearl grips....so you should be!
 
Tanaka really are the gold standard when it comes to Airsoft replicas of iconic guns and this is no different. In the hand I find my mind becomes muddled between which parts are metal and which plastic, as it's cold and heavy to the touch. As mentioned the grips aren't real pearl, but as the gas is stored in the cylinder I'm sure there are a whole variety of aftermarket options. Although these already feel fantastic!
 
This has been through mild garden plinking on low powered gas, never taken to a skirmish or even been holstered. So looking over it I can't spot a blemish, although for the ultra finicky, I have to use the caveat that minor marks always possible (even on brand new guns!).
 
It holds ten shots and shoots reliably, so it's definitely useable. However don't expect super range and accuracy, this is very much one you'd use purely for the coolness factor.
 
Stated price includes PayPal fees and trackable postage. Please PM me any questions as I don't get notifications of anything asked on the listing.
 
 

If you fancy something a little bit different on a budget, this is the RIF for you
 
from the manufacturers blurb……saves me making it all up. See below….
 
The rifle will be sold in original box, with 3 mags and the suppressor shown. The original flash hider is also there. It shoots really well, cymaks built quality in recent years, especially in the AK platforms has been pretty good. I’m only selling as I have a few too many RIFS, that don’t get used.
 
The bad bits…. Not really a bad bit to be honest.
 
the outer barrel was shortened, quite crudely, however this has no effect on the acutely operation of the gun, and is really not noticeable - 5 minutes with the correct dye, would re thread the end of the remaining outer and it could be restored to the correct length with a cheap barrel extension. - the suppressor holds fine on the threading that has been done..   any questi9ns just ask, this is a typical Cyma ak that shoots well, decent range and accuracy with plenty batter space - ITS JUST THAT LITTLE BIT DIFFERENT! 
 
price £175 Ono, including postage, (plus PayPal fees)  will consider a swap for a good tactical AK, 
 
postage will be parcel force 48 
 
I am also happy to consider using this as part payment towards a TM recoil AK 
 
PLEASE NOTE : I will only arrange a postal swap with someone who has positive and recent sales feedback in this group, or who is vouched for by a longstanding member of this group with recent positive sales feedback 
 
 
CYMA BLURB….

The AK Alfa is an Israeli-American assault rifle manufactured by Kalashnikov USA and chambered in 7.62x39mm. The AK Alfa was originally based on civilian Saiga models and fitted with external parts produced by CAA. Following the American embargo on Russian weapons, this rifle is now produced on the basis of AKs manufactured in the USA by Kalashnikov USA.
 
Manufactured by Cyma, the CM.103A features an external : 
.
Robust, thanks to its 16" aluminum outer barrel.
Modular thanks to upper, lower and side Picatinny rails.
Ambidextrous thanks to its firing selector and catch magazine accessible from both sides.
Adaptable to all morphologies thanks to its retractable and folding stock and adjustable cheek rest.
 
And an internal : 
 
Special gearbox with QD spring guide for easy spring changing.
Reinforced internals with steel-toothed piston and steel gears.
Improved cycle smoothness thanks to 8mm Bearings.
Enhanced trigger response thanks to Hi-Torque motor.
 
In short, the CM.103A is an ideal choice for players who want a uniquely styled replica based on the AK-type platform.