NamSam
-
Posts
30 -
Joined
-
Last visited
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by NamSam
-
Time Left: 2 days and 7 hours
- For sale
- Used
Up for Sale is my much loved Tokyo Marui M14 long variant. Unfortunately this doesn't get the use it deserves as I prefer my G3 as a more ergonomic long rifle Platform As can be seen in the pictures this is pretty special. The body and the suppressor have been hydro dipped in Multicam camouflage and thus very hard wearing, it doesn't just rub off. Internally the only things Marui on this are the hop and gearbox outer (and parts) it is fitted with a Guarder Full Tune Up Kit (these are £138 alone from FS) this includes new Nozzle, Cylinder head, Cylinder, Piston Head, Piston, Spring Guide, Gear set, tappet plate and anti reversal latch. It has a M100 fitted firing around 330. Also fitted is a Perun AB++ programmable mosfet, this is very easily accessible when plugging in the battery (deans) and very user friendly to program. The inner barrel is a Prometheus tight bore with a maple leaf hop rubber. The suppressor is QD by just unscrewing a few turns to reveal a Scar type flashhiders. Also included is a Marui top rail however this is missing parts to fit. The gun is missing a metal part that goes at the back of the receiver near the cocking lever but does not effect the operation at all. Also fitted to the gun is a King Arms full metal RAS front end. This gun is certainly not without its battle scars but overall is in a great condition and ready to be used reliably straight away. Definitely an M14 to stand out from the crowd! Included are 2x Marui high Caps and 2x Chinese High Caps Price is £300 inclusive of fees and postage. Located Pontefract West Yorkshire.£300
- GB
-
This advert is COMPLETED!
- For sale
- Used
This is My JG P90, I bought this new about 18 months ago, unfortunately only used it three times due to not playing CQB enough. It is fitted with a ZCI 6.02mm inner barrel and a Maple Leaf Hop Rubber otherwise all is stock. Firing at 330 FPS on a .2. included is 1x Mid Cap and 3x JG High Caps. Also included, red dot inc protector and Lazer. £140 all in£140
- GB
-
This advert is COMPLETED!
- For sale
- Used
This is my AGM MP40 with a brown lower receiver. I bought this about 2 years ago with the intention of using it but unfortunately have never. The gearbox has been upgraded I was told by the previous owner, the red metal nozzle confirms this. The gun is firing 310 FPS on a .2 and comes with 5 brand new AGM Magazines. I seem to have been getting some misfeeds when chronoing but I am not sure if this is because I have not loaded the magazines enough. Price is £125 inclusive of fees and postage. No warranty is implied or given.£125
- GB
-
This advert is COMPLETED!
- For sale
- As new
Up for sale is a friends Cybergun M4A1, this is a very nice gun to play with, it is a credit to the work he has done internally. It is fitted with a Perun V2 Mosfet which is fully programable, it is currently set to a hair trigger and medium precocking with a burst function on full auto. He has also changed a few other parts in there such as nozzle, piston, tappet plate. It has been fitted with a rotary hop unit which works very well (original hop is in the box) As can be seen in the pictures, it has a QD suppressor but a longer barrel has been run through this so is fitted permanently, Included is a ris mounted torch that is powered through the plug attached to the gun and 1x High Cap Magazine. The gun is wired in the crane stock to Deans. Price is £190 all in including fees and postage located Pontefract, West Yorkshire.£190
- GB
-
This advert is COMPLETED!
- For sale
- Used
Up for sale is my WE G36k GBB that I have recently replaced with the Marui Recoil version due to me not going out enough to make use of a GBB and enjoy it. I have owned the gun a year and have only used it the once. In my ownership I imported the full G36k conversion from KY airsoft so the handguard, stock, inner/outer Barrel are all brand new never used and at the same time I imported the Scope rail for the top. I also managed to get hold of a RA Tech NPAS so this can be dialed in precisely depending on weather/gas etc. The gun comes with the mentioned above along with the original nozzle I replaced and 4 gas tight magazines. As are common pm these, some of the clip together lugs are broken. Price is £310 inclusive of PayPal fees and postage. More magazines are available and can be negotiated.£310
-
Hi all, I bought a WE G36 GBB early last year thinking I would have a foray into GBB's unfortunately I don't get out enough to make use out of it (as others get preference over this haha!) Since buying it, I imported the full G36 K kit from KY Airsoft, this included a brand new stock, front end, and inner and outer barrel. I also imported the WE scope rail as well. Alongside the externals I managed to get hold of a RA Tech NPAS and since fitted that so FPS can be sorted depending on temperature etc. As can be seen the gun comes with 8 magazines 7 of which are leak free and 1 with a slow leak. As common with these some of the connecting lugs are missing broken but is no detriment to the operation. However also included is 6x 3d printed M4 style outer casings so they can be swapped into these to fit in standard M4 pouches! The gun also comes with the original top rail and nozzle. So my question is, what's peoples thoughts on pricing? Am I best in splitting it into separate packages? I.e selling without all of the mags. Am I being realistic in hoping the asking price starts with a four? Many thanks in advance. Sam.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Up for sale is a friends Cybergun M4A1, this is a very nice gun to play with, it is a credit to the work he has done internally. It is fitted with a Perun V2 Mosfet which is fully programable, it is currently set to a hair trigger and medium precocking with a burst function on full auto. He has also changed a few other parts in there such as nozzle, piston, tappet plate. It has been fitted with a rotary hop unit which works very well (original hop is in the box) As can be seen in the pictures, it has a QD suppressor but a longer barrel has been run through this so is fitted permanently, Included is a ris mounted torch that is powered through the plug attached to the gun and 1x High Cap Magazine. The gun is wired in the crane stock to Deans. As can be seen the gun is inside of a Custom made Steel Case. No beating around the bush, this is heavy. So collection would be preferred as the postage cost would be in the region of £30 Price for just the M4 and ancillaries (no case) £210 including postage and fees Price for M4 + ancillaries+ case is £250 + postage Located Pontefract, West Yorkshire£210
-
This advert is COMPLETED!
- For sale
- Used
Up for sale is a friends JG P90, It is in Excellent condition, he bought it for use at CQB bus has never used it. It appears to have seen very little use, it is completely stock doing close to 350 FPS. It comes with 1x JG High Cap. The gun is wired with a small tamiya connector. Price is £110 inclusive of Paypal fees and postage.£110
- GB
-
-
This advert is COMPLETED!
- For sale
- Used
Up for sale is this Classic JG SVD/AK. It is completely stock. Plastic bodied and takes standard AK magazines. The magazine that comes with it is a brand new Metal Nuprol High Cap. Unfortunately it is missing the original bi pod. Chrono'd at 325 FPS on .2g bbs. Selling due to buying a quite expensive gun and realizing this will not get used. Original box is included. Price is £100 inclusive of fees and postage£100
-
This advert is COMPLETED!
- For sale
- Used
This is my Golden Eagle M870 gas shotgun, unfortunately it doesn't get used as shotguns aren't really my thing. It is in great condition with only minor usual wear marks. As can be seen it has been fitted with aftermarket stock and flip up sights. The gun comes with 20 shells total. All holding 30bbs per shell (10 shots). I have just Chrono'd this on the only gas I have which is Nuprol Red gas and it was doing 380 so I would recommend using green gas or maybe something a little weaker to bring it into your sites FPS limit. Price is £150 including postage and fees.£150
-
This advert is COMPLETED!
- For sale
- Used
Up for Sale is my Tokyo Marui Hand Cannon. This comes with 2 gas tight magazines overall. It has upgraded recoil springs, hop rubber and tight barrel. With the upgraded recoil springs it can take more powerful gas than standard. I have had this chrono 350 on green gas on a hot day! It is also fitted with Hogue Grips It is in good condition with a few age related marks. The thread on the front was glued on before I got it but I have never attached anything to it. Hop is adjustable without taking the slide off which is a great feature from Marui. Also comes with original box. Price is £125 inclusive of PayPal fees and postage.£125
-
This advert is COMPLETED!
- For sale
- Used
This is my Spare FN2000 (because everyone needs 2?) This is the cybergun version so has a few trades on the body. The previous owner has done a spray job on the RIF as can be seen in the pictures and also they seem to have spent a lot of money on internal parts, the barrel, hop unit, rubber, motor and lots of the internals are all aftermarket! I am not going to get round to using this as I have the G&G one already. The nice thing is, this is fitted with the G&G torch grip. The Cocking lever is broken as can be seen in the pictures As I have not used this, no warranty is implied or offered. This chronos between 260-270 so probably wants a look at but I have no idea of range etc. Price is £120 inclusive of fees and postage£120
-
This advert is COMPLETED!
- For sale
- Used
This is my DE UMP that I bought on a whim last year after playing with my friends G&G one. I have realised I'm never going to use it so have decided to sell. The overall condition is very good with no gouges etc. I have never used the RIF so can't comment on range accuracy etc. Chroning at 260-270 so might want a look at £85 inclusive of fees and postage£85
-
This advert is COMPLETED!
- For sale
- Used
Up for sale is my JG Mac 10 AEP. This is in great condition and is completely stock. The only problem with the RIF is the suppressor has been hit with "sticky rubber syndrome" the outer of the suppressor has gone completely tacky. I would suggest wrapping it in tape? The RIF comes with 2 batteries and 2 high caps. Price is £80 inclusive of fees and postage£80
-
This advert is COMPLETED!
- For sale
- Used
Up for sale is my CA XM177 it is in a used condition. It has always been my backup up until a couple of years ago. The gun has the Iconic XM pop when fired so people know it is you firing! As the RIF hasn't been used for a few years it is sold with no warranty implied or offered. It is a little sluggish but fires fine on both semi and auto. It used.to chrono around the 300 FPS range. Because of the age I cannot confirm the condition of the hop rubber. The body has had a spray job in its life and the middle of the bolt cover is missing. Otherwise this is a solid well made RIF. I have tried to be fair with the description. Price is £140 inclusive of fees and postage.£140
- GB
-
This advert is COMPLETED!
- For sale
- Used
Up for sale is my KWA Beretta M93r. I bought this early this year but realised I am not going to use it. It comes with 2 magazines (slightly longer than normal Beretta M9 magazines) it can fire in Single/3 round burst and Full auto! As can be seen it has usual wear marks on slide paint etc. Both mags hold gas perfectly and the gun cycles well. It is missing the hop adjustment key so one of these will have to be sources. Price is £110 including postage and fees.£110
- GB
-
This advert is COMPLETED!
- For sale
- Used
This is a Specna Arms (SA) M249 Para. This is the plastic bodied version making it a lot more easy to skirmish with for a length of time. The gun has not been skirmished a lot so is in very good condition with a few light scuffs. However as photo'd unfortunately the carry handle has been cut off. The Gearbox has been through and has now been shimmed correctly with also work done to gain good compression meaning it now fires at 340 FPS. It comes complete with the 2500 rnd box magazine. No original Price is £180 inclusive of postage or can be collected from Pontefract West Yorkshire. (The Name in the Pictures is my Discord Name) Any concerns/queries please ask and I can send a timestamped picture. Sam.£180
- GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Hi All, As stated, after a WE GBB G36/G39/999 Hop up assembly. Thanks.NO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
Hi All, As title, looking for a Dynatex Timed BFG. Would prefer one which someone is not using before I buy one Brand New. Many Thanks, Sam.NO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Hi, Looking for either a completer gearbox or parts of to repair an MP40 I have. My trigger plate mechanism has broken so even just that part if someone has one? Many thanks, Sam.NO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale
- Used
Selling on behalf of a friend. This is a Boneyard, Spares or Repairs JG Mac 10. As can be seen the suppressor has gone sticky (as in my other listing) the handle has been attacked with a soldering iron at some point with aim of stippling the grip but they gave up midway through the job. The battery slide is missing but the battery still does fit in there and would work if fixed. The gearbox is complete but is not firing at the moment hence spares or repairs. It comes with a working high cap magazine and a battery and charger. Price is £30 all in including postage£30
Wakefield
-
This advert is COMPLETED!
- For sale
- Used
Selling this on behalf of a friend. This is a JG Mac 10 that was bought a few years ago. Unfortunately the Suppressor has been hit by "Sticky Plastic Syndrome" so would need to be wrapped in something to stop the whole woodland sticking to it! The Mac 10 has been converted to a small tamiya connector so it can run on 7.2v Lipo batteries instead of the standard "chocolate bar type" It comes with the original instructions, a High cap magazine and the gun itself. I have been told it has a marui tappet plate in but cannot confirm. I have fired a few bbs through so all seems to work as it should. However sold as seen. Price is £60 all in including Postage.£60
Wakefield
-
This advert is COMPLETED!
- For sale
- Used
Up for sale is my Tercel M1911 that I have had for over 10 years, it has been hanging around in a cupboard for around 7 of them haha!! It is a full metal copy of a Tokyo Marui M1911 which as seen in the pictures all strips down as it should. The Gun does not lock back when pulled back as I think the sear has worn. It comes with a Tokyo Marui MEU magazine which I cannot confirm it holds gas, As can be seen it is fitted with the custom Punisher wooden M1911 Grips. The Gun is sold as spares or repairs as I have no idea if it works it did a long time ago, but that was a long time ago! Please study the photographs and decide for yourself if you want to take it on as no returns as above it is spares or repairs! Price is £45 + £10 Next day P&P Sam.£45
Wakefield, West Yorkshire - GB
