lukeB

Complete front from a new cyma CM98a.
M4 Receiver is a new Dboys from powair (https://www.powair6.com/en/aeg-body/13238-dboy-m4-metal-body.html) - note: no charging handle, may want some better receiver pins
Comes with a cut down gearbox shell for use with HPA.
 
Was destined for a HPA build but ended up buying another MTW.
 
For an extra £15 I can include a cyma standard v2 gearbox shell, motor, cyma rear wired mosfet, and internals to make an aeg.
Collection from Oldbury, B68

I have for sale,
 
2 virtually brand new condition DAS electric blowback rifs. Just don’t have time to use them and we’re bought in 2022. (Receipt to prove) 
 
Set to approx 365fps (milsim use) on the 416 and 328fps on the 15. But the bolt carriers are interchangeable and will come with a spare steel bolt carrier.
 
comes with at least 8 mags, all certificates, handbook/user guide and carry case.
I have mounted rails for attachments.

DSG Krytac Trident MK2 PDW-M
Fully custom DSG (only stock thing is the MK2 body)
50 RPS
330 FPS on .20S
Never ever had an issue
This is my pride and joy but I'm moving on to better things...
(Only works with PTS EPM 1 mags)
 
Will trade for full HPA Setup or MONK Build, shoot me a DM to see
£2000 but will listen to sensible offers
 
Parts list as follows
KRYTAC PDW-M
EdGI Custom Barrel
PROMETHEUS Hop Chamber
PROMETHEUS Bridge Nub
PDI Bucking
RETRO ARMS CNC Gearbox
RETRO ARMS Selector Plate
RETRO ARMS Tappet Plate
RETRO ARMS Bushings x2
EZO Bearings x4
MAXX Nozzle
SHS Cylinder Head
PDI Cylinder
MODIFY Piston Head
CYMA FMR Piston
PDI Main Spring
SIEGETEK Gear Set
LONEX ARL
WARHEAD CNC Motor
MAXX CNC Advanced Trigger
GATE TITAN Advanced
PTS EPG-C Grip
RETRO ARMS Fire Selector
RETRO ARMS Selector Cover
RETRO ARMS Trigger Pin
RETRO ARMS Mag Catch

G&P M16a1 
Very good condition used maybe 3 times at Gunman ColdWar Events
This is fitted with a Gate Titan set for safe,semi,3rd burst 
Combat South ‘s’ hop modification so need to use .32’s 
Deans Battery connector 
Comes with 4 magazines 3 are TM 68rd and 1 unbranded Std 
all fit and feed well.
 
Paperwork for modifications will be included 
These are difficult to locate now this was one of the last ones FireSupport had in stock.
I would like in the Region of £385 I’m located in the Tw15 area if anyone would like to collect.

As above.
 
Shoots great, ROF set to 50% as it was too high. awesome gun. built two LCT AKs at the same time, The AK105 was sold and the owner loves it. This was built identical internally. never fielded, painted then intentionally worn as it looks cooler ;). zero wobbles anywhere, its rock solid! Cost just shy of 2k for everything here, probably more with all the shipping involved to get it all. 
 
EXTERNALS:
LCT AKS74U (Krink) 
LCT B11 handguard (LCT B19 also included with gas tube)
LCT PT3 stock
real Zenitco RK6 grip
LCT Putnik silencer
custom railed dust cover
EG EXPS3 eotech replica
PTS Palm pistol grip
Replica Zenitco Perst-4 with modified mount to clear the supressor. 
LCT charging handle
LCT tactical selector
LCT magwell spacer
 
INTERNALS:
maple leaf hop rubber
Combat union CNC hop unit
Gearbox shimmed perfectly
SHS short high torque motor
Gate Aster with programming cable 
 
Extras:
Blue force gear AK sling.
Blue force gear universal QR loop.
LCT bulgarian 3 piece steel flash hider
LCT steel muzzle break.
6 x LCT low caps
3 x 11.1v batteries 
 
PRICING
The gun with all of the above - £600 I can deliver but will cost extra
 
10 x PTS AK mags with real Magpuls, these are new and most of them never used, just painted - £200 delivered

Helikon Guardian chest rig in OD with a canteen, a rep crye harness and back strap. all new and never fielded, I added some paint to break up the pattern. - £120 delivered - SOLD
 
No swaps
 
Collection only from Portsmouth, its a lot of kit and weighty. You can test it all out before you leave. 
Video below of it firing. 
 
 

Cyma base model main body 
Vs-25 front rail 
PT-3 telescopic folding  stock 
Zenit grip 
Putnik suprressor
Aimpoint rep red dot 
Surefire repl scout lite with pressure switch on Haley mount 
 
Inside has polerstar kythera 
Upgraded hop with 6.02 barrel . Maple leaf rubber and nub 
Four mags 
 
£495 
Balystic reg. New bottle and line add extra £120 
 

Started life as a ngrs cqbr then modded a G+P carry handle upper and outtrr barrel to fit the TM lower.
 
 
 
Internally;
 
Polished and radius gearbox
 
Steel bushings
 
Shimmed
 
AOE correction
 
Laylax hardened gears with helical pinion and motor gear.
 
Fsp prototype full steel teeth piston and head. 
 
Gate titan
 
Prometheus tappet plate
 
30k boost motor
 
Edgi 5.98m barrel r hopped (lift anything you wanna use)
 
Stronger recoil spring
 
 
 
Being full steel teeth I run it on 11.1v batteries for any extremely snappy trigger response.
 
This Rif being front wired the spring can be easily swapped out for different FPS depending on sites you play at.
 
 
 
Front wired into the hand guard so can run bigger battery's.
 
 
 
Real steel car-15 stock and pad
 
4 mid cap mags.
 
 
 
2nd and 3rd pics are how it looks atm paint will clean off with spirits if not your taste.
 
 
 
Have a the aimpoint comp2 available for extra from the first photo.£200
 
 

Price drop!!! COLLECTION ONLY
 
Unfortunately I have to sell this to pay for grownup stuff so the toys have to be cut back.
if has been used once for an attack sense game and chronographed  on two sites but not used in anger as I didn’t fancy getting it dirty, the magwell doesn’t even have any marks or wear to corroborate this lack of use.
 
can be tested on collection 
 
it comes with
 
tm cqbr block 1
3 gas tight mags with increased fill conversion
PTS raptor ambi charging handle, original included 
spare stock, original included 
genuine magpul grip, original included 
picatinny Q/D sling mount
eotech clone with neoprene cover good quality 
picatiiny rail covers
various barrrel extensions to make into carbine should you prefer it
 
internally
 
guns modify 150% nozzle spring fitted upon purchase, original included
tan modify bucking, original included
dave golf’s custom brass nub (sixg)
 
this thing is as good as they say, with tan bucking and Dave’s nub it outranges aegs and can give dmrs a good run for their money.
 
fun recoil with Tm quality and cold weather reliability 
 
 
i will regret selling this but as I say, needs must.
 
no splits or swaps thank you 
 
 
oops forgot it also has the six g high speed buffer
 
 
 
 
 

Make: LCT
Gun/Model: PP19
Accessories: See below
Condition:
FPS: Approx 350
Splits/Swaps/Part Exchange: N/Y/Y
Price/Payment: £500 not including fees or postage
Pictures: See Below

Externals and accessories
7 x LCT Midcap Mags
LCT Suppressor
LCT Folding Stock ZPT-1 Stock
LCT sling mount
LCT railed lower handguard
Original lower handguard
Original Folding stock

Internals

Internal upgrades
Full Leotek upgrade package including:
Prometheus inner barrel
Gate Titan mosfet
Ultimate Gear Set
Ultimate Infinity Motor
Prometheus Hop Rubber and Nub
Leotek Hop Mod
And others I’m not sure of

Ive used this at mainly 2 half game days at best. Still in excellent condition and it’s performance is exceptional for a SBR. It cost somewhere in the region of £1000 to put together but it’s not getting used and I have my eyes set of a TM NGRS.

Swaps/part exchange wise I’m only interested in the follow

TM NGRS Urgi
Mayflower RG UW Gen V split front chest rig

Please PM me for a response

Due to lack of use I'm selling my TM Recoil/L119a1.  
 
Upgrades include:
Prometheus piston head
Prometheus spring guide
Prometheus cylinder head
Prometheus air nozzle
Prometheus cylinder type A
Eagle6 M100 spring
TM RAS set
Laylax metal lower receiver - blank version that was then custom engraved
BTC Spectre (not bluetooth)
 
Also includes the ACOG with wing mount, genuine Surefire Scout, 9 mags and 5 batteries that fit in the PEQ.
 
Issues I'm aware of are the mag stop on empty isn't working and the front end needs tightening, has a bit of a wobble.  My technical expertise ends after filling the mag and changing the battery so I've not attempted to resolve either issue.
 
The Spectre is currently set to single and 3 round burst and overall it's a lovely bit of kit with great range.
 
I'm based in Bishops Stortford (CM23) and happy to deliver or meet as long as it's not too far.
 
Happy to answer any questions.
 
Thanks
Rob

Genuine ACOG TA01, tritium still works and it has a genuine wing mount( copies are hard to find let alone the genuine one), however I think the doctor sight on it is a clone but take it as free with the ACOG. 680 for the ACOG. Collection from Leicester

Brand new LCT RPK
 
FPS-332 ON .2g
 
Runs nice on a 7.4v
 
Bought this gun on a whim however had a change of heart and now selling to fund another project! It is brand new. Never been fielded simply been out of the box and tested in my room! So does have the uusual AK selector line but that's the only mark on the gun! It was very low FPS when I bought it so I have since then changed out the piston head as well as the spring! Now it is shooting very nicely at 332 as seen. Comes with the one mag as show aswell as the box and paperwork
 
After £340 plus postage and PayPal fees or can be collected if the buyer would prefer! Either from Derby or Lincoln

For sale, my old real steel IMI Defense drop in carbine quad rail/handguard for the M4/AR15 platform. Used and in good condition. Comes with 2 genuine FAB Defense rail panels and 1 half rail panel. Taken off real Section 1 AR15. Replaced with KAC RAS so no longer needed. The bottom rail did rattle slightly on my gun but can possibly be rectified with some modification. Thanks for looking. £40 delivered to UK mainland.

Wolverine Inferno package.
Unit is from my broken MP5 which never got used.
 
Hpa unit
Black/Red grip line 
M4 and Sr25 nozzles 
New set of orings 
 
Spartan Fcu x2 - one of these boards has the selector removed from the fcu, which effectively makes it semi locked. Can still adjust dwell but not rof or fire mode.
 

HTI in desert tan + 1 mag 
fasthop, 100% seal and Rhop patch fitted along with FOW nub. 
 
Vortex scope with the proper desert tech scope mount. 
 
comes with 3 springs - 85N 110N and 155N
 
suppresor has some light scuff marks and the hand guard has one area of paintloss about 3mm in size. other than that, this is basically a new rifle and hasn't been skirmished. 

Krytac CRB trident body and rear stock. noveske front rail 
Short barrel with suprreesor
Wolevrine sparten hpa installed
Pro win hop with brass 6.03 barrel 
Shoots lovely and quiet as u expect . Sprayed and weathered back a few times 
Bad points . Right hand side selector doesn't function 
Stock mount has been cut back if wanted to put stock tube on . Still get a stock tube but just letting know . The CRB stock is solid and tight  on there . 
 
Sold with attachments as seen in pics
 

Professionally modified TM NGRS HK416 Delta, with Polarstar CGS Co2 stock and F2 engine.
Everything is fitted and finished to the highest standard, perfect functionality.
Please note the 'recoil' and 'mag empty' are not functional.
Custom speed trigger
Billet alu F2 'cylinder spacer'
Billet stainless P*/NGRS nozzle
Modified selector plate
Modified gearbox shell
Custom TiG SS stock outlet disc
Custom stock tube thread adapter
Stock TM barrel & bucking

Externally;
Real steel buffer tube nut
Real steel receiver end plate
Cerakoted burnt bronze CGS buffer tube and mag catch/release
Custom fitted BCM grip and ambi selectors in Ral8000
Giessele airbourne charging handle & other black charging handle
Genuine Magpul trigger guard in Ral8000
Genuine Magpul forward offset rail
IMOD stock in FDE, with velcro.
LEAF front iron sight for PEQ15 compatability
Original front/rear iron sights
6x PTS mid cap mags with 'numbered bullets'
SF steel flash hider
2x genuine 'Sheriff Of Bahgdad' IR combat bands
20x 33g Co2 bulbs
Engine LiPo battery

Serious time and effort put into this build, but i concede HPA is not for me, gun works like a charm but i prefer AEG.
Had it running at 360fps and 20RPS but i havnt pushed it as that was not my goal to make a BB hose.
One in a million build for sure - fit, finish and colouring is gorgeous.
1st picture is how i had it set up, rest of the pics show what you are getting - as described.

Over £800 spent on conversion alone, plus base RIF cost.
Engine and stock have only done 1000 rounds, FCU will prove it.
Engine bought from High Pressure Airsoft, stock from Speedtaq.

New price as scope and DBLA to be sold separately.
 
PDIK - dare I say it - DMR. Locked to semi auto and uses a pneumatic HPA kit (PDiK) so needs no battery. Internally regulated and has a 13ci/3000psi bottle in the Mancraft MASS stock. Has all the responsiveness of HPA but doesn't have an external line getting in your way if you're laying down a lot to snipe. Cerakoted in half graphite, half burned bronze mix.
 
Not used a whole lot in skirmishing as sniping isn't for me
 
Internals
Mancraft PDIK engine Wolverine Storm v2 regulator  
PDI 6.01 barrel ProWin hop unit Flat hopped  
Externals
Licensed SA receiver set from G&P Mancraft MASS air stock Cerakoted by Hi-Spec Coatings G&P MOTS wirecutter rail G&P rifle length outer barrel 5KU ambidextrous selector (does not work ambidextrously due to the way the PDIK works - one side of the selector is just for show, in short) 5KU ambidextrous mag release (this does work) Clone Harris style bipod  
Extras
6x no-name MOE-style midcap 70rd magazines with genuine Magpuls and Mapleleaf enhanced springs for reliable feeding Visionking 3-9x42 with clone Larue quick release mount (mount modified a bit underneath to stop wobble) SOLD G&P DBAL v1 (has the IR modes etc. working that you'd expect) Split into another listing Nuprol carry case with custom foam (pick and pluck but then sealed over with sprayable vinyl for longevity)  
Delivery & Payment
If you really want to 'gift' your PayPal payment based off my previous feedback I will knock off half of whatever the fees are I will accept a return of this in un-skirmished condition within 30 days with no questions asked. I will also pay half of your return postage fees Delivery will be by Parcelforce 48 and I can dispatch within 3 working days of payment (probably sooner but can't be sure).  
I'm not really after swaps unless it's a pistol + cash my way.
 
The regulator can be tournament locked, but it's little fiddly to do (not that you'd want to often).
 
My availability during the days and evenings is very limited so viewing it in person will be difficult. This is why I offer a 30 day returns period and will pay half of the return postage if you change your mind.
 

This is my never-skirmished LCT AK74 with a Daytona Gun kit installed. Selling because it's been sitting in its case for close to a year now. I suppose this is as technically 'new' as you could get a kit like this - the only thing 'used' would be the actual shell of the receiver, but even this has been sand-blasted and refinished. Nothing else has ever been used except for running some BBs through the gun during installation.
 
The gun itself is Cerakote'd in a mix of gunmetal grey and titanium, so it has a slightly blueish hue to it. Hopefully the camera picks this up, but let me know if you want more pictures.
 
Internals
Datyona Gun gen 3 LCT/E&L AK kit from Blackblitz (though I installed this myself) https://www.daytonagunairsoft.com/collections/conversion-kits/products/daytona-hpa-lct-ak-rpk-kit EU-spec high pressure line (please note this carefully as you will need an EU-spec hose for your HPA rig - these cost around High RoF recoil spring POM crush ring Has had around 2000 rounds shot through it - will need a further 6000 cycles for break-in  
PDI 6.03 barrel Flat hopped  
Externals
Cerakoted by Hi-Spec Coatings Real steel MOE AK grip (modified internally to fit the Daytona Gun kit Real steel BATTLELINK Minimalist milspec Stock
Ambidextrous magazine release - Hephaestus I believe, but could be wrong
Hephaestus type A selector
Clone MOE angled foregrip (modified heavily to fit up against the mag well)
Asure Dynamics B10M set (the rail)
LCT stamped top rail dust cover
LCT TK104 stock tube
Madbull sound hog
 
Extras
5x MAG midcap 100rd magazines with genuine Magpuls Nuprol carry case with custom foam (pick and pluck but then sealed over with sprayable vinyl for longevity) Carry case has a cutout for the Holosun HS510c being sold here: https://airsoft-forums.uk/classifieds/item/6207-holosun-hs510c/  
Delivery & Payment
If you really want to 'gift' your PayPal payment based off my previous feedback I will knock off half of whatever the fees are I will accept a return of this in un-skirmished condition within 30 days with no questions asked. I will also pay half of your return postage fees Delivery will be by Parcelforce 48 and I can dispatch within 3 working days of payment (probably sooner but can't be sure). I'm away for on week at the end of September and won't be able to post during this time  
I'll accept offers but please keep them reasonable. The amount of labour that goes into pulling together a DG kit is quite high so keep that in mind when considering your offer and check Blackblitz if you want an idea of what kind of value is in the kit and labour itself.
 
If you have never owned a DG before please do your research (I can answer any questions if you buy it) and consider the additional cost of buying decent lube for this gun. GetSome1000 is recommended and I can provide a bottle to get you started (not easy to get in the UK).
 
I'm not really after swaps unless it's a pistol + cash my way.
 
My availability during the days and evenings is very limited so viewing it in person will be difficult. This is why I offer a 30 day returns period and will pay half of the return postage if you change your mind.