.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
AirTech
-
Posts
115 -
Joined
-
Last visited
-
Feedback
100%
4 Followers
Recent Profile Visitors
4,436 profile views
AirTech's Achievements
-
andrey reacted to an advert:
ICS M1 Garand AEG with 5 magazines. Some internal mods.
-
Sylithics reacted to an advert:
VFC LAR/FAL GBBR + 5 magazines + real furniture
-
This advert is COMPLETED!
- For sale
- Used
VFC LAR GBBR up for very reluctant sale due to lack of use. I've owned this for a little over a year and bought it new, internals are standard aside from a Maple Leaf 60 hop bucking, a small mod to increase the surface area of the hop tensioner and an adjustable rocket valve. It's currently shooting at almost exactly 1J, but can be adjusted from around 0.8-1.3J using a small allen key. It currently has a real steel FAL furniture kit fitted which gives it a much more realistic feel. Original furniture is in as new condition as it was swapped out as soon as I bought the replica. The standard carry handle is still fitted but the real one is included with the standard furniture. Some marks from light skirmishing, for obvious reasons the real furniture has a good few marks and scuffs due to (presumably) being military surplus. Supplied in its original box with 5 mags, manual, small speedloader/adapter and multitool. Collection much preferred. Sold as seen with no warranty either given or implied. Thank you for looking£800
Gorebridge, Midlothian - GB
-
This advert is COMPLETED!
- For sale
- Used
Here's my ICS M1 Garand AEG, sadly up for sale due to lack of use. It's in nice all round condition with some marks from use but cycles and shoots nicely. There's a blemish on the right hand side of the stock which is visible in certain light, which doesn't affect the handling or function of the replica. Earlier this year I gave the stock a light sanding and refinished with some walnut stain and beeswax which makes it look nicely aged. This appears to be an early model ICS M1 due to having the 'Springfield Armory' stamping on the heel of the receiver as opposed to the confusing 'Springdale Army' stamping seen on the later ones. Internally it's had the following mods: SHS high torque motor SHS 16:1 gears Gate PicoSSR3 inline mosfet Wiring replaced for heavier gauge + Deans connector ASG M105 spring Small additional tension spring added to the trigger connector for more reliable reset Some small pieces of dense neoprene added between the receiver and stock for a more snug, secure fit between the two Shooting at around 345-350fps on 0.2g at ~1.1J, so should be suitable for use almost everywhere in the UK. The replica will come with 5 magazines and also a very nice leather repro M1907 sling if asking price is met. Feel free to message me if you have any questions or queries. Sold as seen with no warranty either given or implied. Collection welcome and postage can be arranged at buyer's expense and risk. Thank you for looking!£375
Gorebridge, Midlothian - GB
-
This advert is COMPLETED!
- For sale
- Used
KWC Makarov, CO2 powered pistol. Reluctant sale due to lack of use and needing to clear a little space. Good all round condition with some marks as to be expected from skirmishing. Great little pistol which has always done me proud. Works nicely well in the cold due to being CO2 and has a surprisingly effective hop up - I've used 0.36g BBs with this to great effect! On 0.20g BBs it shoots at around 350fps on a fresh Umarex CO2 capsule, settling to around 335fps after a few shots (results may vary with different bulbs). It'll come with 2 magazines as well as the original box/manual/allen key/sample BBs. Magazine seals have been kept in good shape with periodic clean and regrease so they hold their CO2 well - please note that the CO2 capsules will be removed for postage. Postage available at buyer's expense and risk. Sold as seen with no warranty either given or implied. Thank you for looking!£85
Gorebridge, Midlothian - GB
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Nice set of Dutch desert pattern shirt + trousers. As in the title the shirt is Dutch military surplus and the trousers are from Helikon Tex. Nice summer alternative to the usual Desert DPM or MTP seen commonly in the UK. Sizing for the shirt is unclear as the label is quite faded but it fits me quite well at around a 42'' chest. Trousers are marked as a 35-38'' waist with a 32.5-35.5'' inseam. The waist has adjustment tapes and the knees and crotch are reinforced. Shirt in good condition with a couple of small pen marks, trousers have some fading to the knees but also in very good shape. £35 collected or £40 posted/PayPal'd. Sold as seen 😄£35
Gorebridge, Midlothian - GB
-
This advert is COMPLETED!
- For sale
- Used
S&T M1918 BAR AEG. This is a great looking replica and a very good performer as well. Very reluctant sale as this is a heavy beast and I'm not as fit or strong as I used to be! Very good all round condition with some light marks from skirmishing. There's a couple of wraps of black electrical tape on the barrel and mock gas tube at the contact point where the bipod legs sit when folded. Most of the metal parts have been painted a very dark satin grey which is a fairly accurate imitation of a parkerised finish. Wooden stock, carry handle and handguard have been sanded and refinished to a slightly lighter, more convincing colour. Supplied with it's original box/manual as well as 6 S&T midcaps magazines as well its original hicap. Internal mods as follows: • Troublesome microswitch trigger system removed - I replaced this with a very simple home made trigger switch which works spot on (original wiring + trigger unit included should you wish to swap it back) • higher torque motor fitted (stock one was weak) • SHS M105 spring • Aluminium air nozzle with o-ring • Steel ball bearing bushings + gears shimmed • Maple Leaf 60° hop bucking • Perun inline mosfet installed with heavier gauge wiring + Deans connector • Steel extension added to the magazine catch to eliminate wobble from inserted magazines - this fixes the feeding issue that every BAR AEG seems to have. The thing feeds flawlessly now. • Home made steel body pins to replace the flimsy stock ones - original pins were broken by the first owner. The replacement pins are held in place by flange headed screws threaded into each end and are very secure. Replica shoots in full auto only at around 350fps on a 0.20g, I've found it works best with 0.28 at around 295fps. The small circular door in the butt plate has been removed for easier battery insertion - I still have the door and its tension spring which will be included in the box. I can post this but it'd be around £15-20 due to the size and weight of the box. Collection preferred. Sold as seen with no warranty either given or implied. Thank you for looking 😄£350
-
This advert is COMPLETED!
- For sale
- Used
TM Beta Spetz. Neat little AEG, perfect for CQB, as a backup weapon or for a smaller player. This shoots at around 315-320fps on a 0.20g and has had the following internal parts fitted in the interest of longevity: steel bushings, steel gears (stock gears were pot metal), SHS air nozzle with o-ring, replacement piston+piston head o-ring, ASG M100 spring, wiring replaced for heavier guage + Deans connector fitted. Recently camo painted and pretty much unused since. Brand new 600rd hicap included. Currently fitted with an AK74 type muzzle device but will come with a smaller thread protector if this is not to your taste. This is a well used gun but functions very well. Sold as seen with no warranty either given or implied. Thank you for looking 😄£95
Gorebridge, Lothian - GB
-
This advert is COMPLETED!
- For sale
- Used
CYMA G18C AEP, reluctant sale as this is a cool little gun but it doesn't suit any of the kits I run so I'm not getting the use out of it. Cosmetic condition is good with some holster marks near the front of the slide. Internal upgrades as follows: • Perun inline mosfet (replaced the stock unit as it was unreliable), heavier guage wiring and micro deans battery connector • Psionic THO-Rhop hop bucking • Laylax stainless inner barrel - 6.03mm • Eagle6 mainspring The G18 will come with 4 magazines - 3x 28rd, 1x 90rd extended. It shoots at about 255fps on a 0.20g BB, which represents about a 60fps increase on stock. I've also got the original box and manual, and I'll include 2x mini lipo batteries if collected. No returns and no warranty either given or implied. Thank you for looking 😄£70
Gorebridge, Midlothian - GB
-
This advert is COMPLETED!
- For sale
- Used
This is an S&T M1903 Springfield rifle fitted with a Parker-Hale branded 3x scope. It's in good all round shape, the finish on the wooden stock has been slightly polished and darkened to make it look and feel better than the standard matte finish. Some marks from skirmishing but overall this has had fairly light use. Internal mods as follows: Stainless spring guide with ball bearing (believed to be SHS but I can't remember exactly) Maple Leaf VSR10 piston modified to fit SHS steel sear set - 45 degree Maple Leaf stainless inner barrel - 300mm Maple Leaf 60 hop bucking The rifle shoots at around 370fps with a 0.20g and about 290 with a 0.30g. It'll come with the scope (unsure when this was made but I'd imagine 70s or 80s), leather cheek pad, 3 magazines, an M140 spring which should acheive about 2J, original piston/barrel/hop bucking/sears. With the stock spring the rifle works best on 0.30-0.32g BBs but will handle up to about a 0.40g. With the 2J spring 0.40-0.43g have seemed to give the best results for me. Postage can be arranged. Sold as seen with no warranty either given or implied. Thank you for looking£220
Gorebridge, Midlothian - GB
-
This advert is COMPLETED!
- For sale
- Used
Here's my M16A3 AEG modified to resemble Canada's C7A1. I put this together as a frustration project after being extremely disappointed with G&G's attempt at the C7A1. It's in good shape all round with some signs of skirmishing and the odd mark here and there. This is based on a Double Bell M16A3, and as such it still has the Colt and US Govt emblem on the receiver. The furniture and the rubber housing for the M145 sight have been painted using Krylon and has been done pretty well, these parts were removed for painting so there's zero overspray etc. There's a 3D-printed tri-rail section fitted to the front sight triangle as per the C7A1. Internal mods as follows: Perun inline mosfet unit along with heavier gauge wiring and Deans connector Steel ball bearing bushings Higher torque motor from a Cyma Platinum SHS o-ring air nozzle Silicone hop up patch fitted to hop window, elongated hop nub AEG shoots at around 345-350fps on a 0.20g BB but runs best on 0.28-0.30g. The hop up unit is a rotary type which holds its adjustment well, and the mock bolt catch is functional. The Classic Army M145 sight has clear optics and the reticle illuminates red/green. I also have the standard carry handle which will be included, AEG will come with a ~190rd short hicap as pictured. Postage can be arranged, sold as seen with no returns either given or implied. Thank you for looking£180
Gorebridge, Midlothian - GB
-
This advert is COMPLETED!
- For sale
- Used
Replica Aimpoint M2 style dot sight with a low mount. Build quality is very good and the glass is clear, nice click adjustment on the turrets. Overall condition is very good with some signs of light use. The dot illuminates red and green with a couple of brightness levels for each (the photos seem to dim the brightness of the dot a bit). Runs on a single AAA battery - fresh battery fitted. Comes with a rubber lens protector that covers both ends. I added a couple of very small strips of thin aluminium to the underside of the sight to get a slightly tighter fit on the RIS rail, this can probably be quite easily removed if not required. Sold as seen with no warranty either given or implied. Happy to post 😄 Thanks£25
Gorebridge, Midlothian - GB
-
This advert is COMPLETED!
- For sale
- Used
Boneyard AGM MG42 magazine in good external condition. With a battery connected the motor will spin up but the feeding mechanism doesn't move - one of the gears inside has given up. Stock battery cage has been replaced with a connector for a 9V battery. A good candidate for repair if you have the parts (or maybe a 3D printer) or maybe even to transplant a hicap mechanism into. Sold as spares/for repair for obvious reasons, no returns and no warranty either given or implied. Postage available, just ask 😄 Thanks for looking£25
Gorebridge, Midlothian - GB
-
-
This advert is COMPLETED!
- For sale
- Used
Hi! After much deliberation I've decided to part with my Belarusian POSP scope. This is a real-steel scope manufactured by BelOMO in Belarus and is effectively a commercial version of the PSO-1. I bought this very shortly before Putin decided that Russia wasn't big enough, and it may be very difficult to get hold of these for a while due to the manufacturer having been put on a blacklist by the EU/UK/Canada/US etc. It has 4x magnification and a PSO-1 type reticle with the proper 1.8m calibrated range estimator. Optics are crystal clear and the reticle illuminates red (powered by 2 LR44 batteries). The illumination switch has 'on' and 'off' visible as opposed to the Cyrillic equivalents on the older/military versions. The scope will come with the SVD and AK mounting adapters as well as its carry case, instruction manual (Russian), adjustment tool, POSP branded lens cover (modified with a piece of clear perspex to protect the lens when flipped open) and a rubber eye piece which I've trimmed down very slightly at the back to get the eye relief correct. The scope itself has some marks and scuffs from skirmishing and the carry case has a small cut on one corner, presumably done by customs when it arrived in the UK. Sold as seen with no warranty either given or implied. Offers will be considered. Thank you for looking 😄£230
Gorebridge, Midlothian - GB
-
This advert is COMPLETED!
- For sale
- Used
Cyma SVD scope mount with 20mm RIS rail. Very good condition having had light use. Attaches to the rail on the right side of the SVD receiver, confirmed to fit Cyma/S&T and King Arms SVD replicas. Very robust and over engineered mount! £30.00 posted, no warranty and no returns either given or implied Thanks 😄£30
Gorebridge, Midlothian - GB
-
This advert is COMPLETED!
- For sale
- Used
Hi! Reluctantly up for sale is my Cyma SVD-S. It's served me very well since buying it new around 2 years ago and would be keeping it if I hadn't caught the Vietnam bug! Despite looking like a DMR it's been set up for use as a standard rifle and performs very well as such - semi auto only from the factory. Internally it's had the following mods: SHS high torque motor Gate PicoSSR3 mosfet, heavier gauge wiring and Deans connector SHS air-seal nozzle with o-ring Stainless steel inner barrel, 6.03mm - I believe this is Maple Leaf but can't remember exactly. It has an R-hop patch fitted so lifts heavier BBs well. General set-up - shimming/air seal etc. The replica will come with a Cyma SVD-specific RIS mount and 4 magazines in total (1 hicap, 3 midcap) as well as a surplus Soviet rifle sling. Original box, manual and cleaning rod also included. FPS is around 350 on a 0.20g BB but it works best with 0.28 and 0.30g. Not a replica you see every day and the side-folding stock helps with packing away for transport to and from your local site. Overall condition is very good with some small marks/scuffs from skirmishing. Collection preferred but I can post via ParcelForce 48 at the buyers' expense and risk. No returns and no warranty either given or implied. Thanks very much for looking£230
Gorebridge, Midlothian - GB