L3nny3

SOLD
 
For sale is a WE M4 build as pictured. The gun is in decent condition overall with some signs of wear and should function well however I have no mags to test this with so will be sold as seen. Has an EMG SAI Bolt carrier group installed along with engraved BCM markings on the receiver.
 
No muzzle device or rear takedown pin, although a similar size one is in place that keeps it together well.
 
Also has an issue that the trigger reset on semi doesn’t work so it won’t cycle on semi properly without the trigger being repaired, it should however cycle fine on full auto.
 
parts as follows:
EMG SAI Bolt Carrier Group 
Clone DD Lite Rail 
Magpul PTS MOE-K Green 
Clone Magpul CTR FDE
Ambi Charging Handle
 
The SAI Bolt itself is worth a bit so this could be used for parts or could be repaired fairly easily by someone familiar with WE M4s.
 
currently don’t want to split but will consider it with enough interest 
 
open to swap offers
 
Please PM with any offers or questions 
thanks!

For sale is my WE G3, modified by LC Engineering with new furniture and shorter outer barrel. All in very good working condition, hasn’t even been skirmished.
Was going to make this into a DMR project but ended up abandoning that in favour of other things. 

This project end up costing around £850 total (each mag is £65 each!)

Fitted with the following parts/ modifications by LC Engineering:
Real HK Black Handguard 
Real HK Black Pistol Grip
Bow Master VFC G3 stock 
Barrel shortened+ rethreaded

All the parts fit beautifully, the Bow Master stock using part of the original recoil assembly so that it can function. Very one of a kind!

Open to offers on this, in terms of trades/ PXI’d mainly be interested in VFC V3 GBBRs but open to any offers. 

Please PM if interested or with any offers etc
Thanks!

Make: TM
Gun/Model: MWS MK18 Mod. 0
Accessories: 6 mags+ extras 
Condition: Used, good 
FPS: Stock
Splits/Swaps/Part Exchange: Y/Y/Y 
Price/Payment: £
 
For sale is my TM MWS MK18 Mod 0 build, this was put together with several parts and accessories to make it both an accurate clone and good performer. Parts list/ extras as follows:
 
TM Mags x 5
TM LMT Rear sight 
SOMOGEAR PEQ-2A visible 
G&P KAC NT4 Suppressor + Steel birdcage
Real Surefire M951
Real KAC 11 rib panels x2
Clone Aimpoint + Wilcox mount 
MWC PRI M84 charging handle 
ZParts forged Lower receiver (FN Trades + Cerakote)
Angry Gun M16A1 pistol grip
Angry Gun outer barrel
G&P Roller Bolt
G&P CAR stock + Clone pad
G&P KAC Grip
SixG Brass Nub
Modify Tan Bucking (Pre QC issues)
DP Spring set

Also have the following spares/ upgrades not currently installed:
DP Buffer seal
G&P Adjustable valve
Angry Gun ZET plate
TM Buffer
TM Springs
TM bolt
TM CQD Sling mount (RIS)
TM charging handle 
 
All in all the RRP of this build is over £1500, most of the parts purchased new and a few second hand. Even has two genuine KAC panels which were a pain to find!
 
To make the build 100% clone correct I believe the only changes would be an A1 Profile lower and a CQD sling plate.
 
The gun is in good working condition, the upper has had some model paint applied and partially removed for a subtle “worn” effect but otherwise everything is like new. The PEQ, optic and light all function well also. 
 
I would ideally like to sell this as a complete package but will consider splits for mags/ attachments etc. Current price is inclusive of the entire package!
Open to swaps/ PX for a VFC V3 GBBR 
 
Please PM with any offers or questions
Thanks!
 
EDIT: have had a lot of interest in the mags so would be happy to sell the entire package with 1 mag for £650

Make: TM
Gun/Model: MWS MK18 Mod. 0
Accessories: 6 mags+ extras 
Condition: Used, good 
FPS: Stock
Splits/Swaps/Part Exchange: Y/Y/Y 
Price/Payment: £
 
For sale is my TM MWS MK18 Mod 0 build, this was put together with several parts and accessories to make it both an accurate clone and good performer. Parts list/ extras as follows:
 
TM Mags x 5
TM LMT Rear sight 
SOMOGEAR PEQ-2A visible 
G&P KAC NT4 Suppressor + Steel birdcage
Real Surefire M951
Real KAC 11 rib panels x2
Clone Aimpoint + Wilcox mount 
MWC PRI M84 charging handle 
ZParts forged Lower receiver (FN Trades + Cerakote)
Angry Gun M16A1 pistol grip
Angry Gun outer barrel
G&P Roller Bolt
G&P CAR stock + Clone pad
G&P KAC Grip
SixG Brass Nub
Modify Tan Bucking (Pre QC issues)
DP Spring set

Also have the following spares/ upgrades not currently installed:
DP Buffer seal
G&P Adjustable valve
Angry Gun ZET plate
TM Buffer
TM Springs
TM bolt
TM CQD Sling mount (RIS)
TM charging handle 
 
All in all the RRP of this build is over £1500, most of the parts purchased new and a few second hand. Even has two genuine KAC panels which were a pain to find!
 
To make the build 100% clone correct I believe the only changes would be an A1 Profile lower and a CQD sling plate.
 
The gun is in good working condition, the upper has had some model paint applied and partially removed for a subtle “worn” effect but otherwise everything is like new. The PEQ, optic and light all function well also. 
 
I would ideally like to sell this as a complete package but will consider splits for mags/ attachments etc. Current price is inclusive of the entire package!
Open to swaps/ PX for a VFC V3 GBBR 
 
Please PM with any offers or questions
Thanks!
 
EDIT: have had a lot of interest in the mags so would be happy to sell the entire package with 1 mag for £650

Make: TM
Gun/Model: MWS MK18 Mod. 0
Accessories: 6 mags+ extras 
Condition: Used, good 
FPS: Stock
Splits/Swaps/Part Exchange: Y/Y/Y 
Price/Payment: £
 
For sale is my TM MWS MK18 Mod 0 build, this was put together with several parts and accessories to make it both an accurate clone and good performer. Parts list/ extras as follows:
 
TM Mags x 5
TM LMT Rear sight 
SOMOGEAR PEQ-2A visible 
G&P KAC NT4 Suppressor + Steel birdcage
Real Surefire M951
Real KAC 11 rib panels x2
Clone Aimpoint + Wilcox mount 
MWC PRI M84 charging handle 
ZParts forged Lower receiver (FN Trades + Cerakote)
Angry Gun M16A1 pistol grip
Angry Gun outer barrel
G&P Roller Bolt
G&P CAR stock + Clone pad
G&P KAC Grip
SixG Brass Nub
Modify Tan Bucking (Pre QC issues)
DP Spring set

Also have the following spares/ upgrades not currently installed:
DP Buffer seal
G&P Adjustable valve
Angry Gun ZET plate
TM Buffer
TM Springs
TM bolt
TM CQD Sling mount (RIS)
TM charging handle 
 
All in all the RRP of this build is over £1500, most of the parts purchased new and a few second hand. Even has two genuine KAC panels which were a pain to find!
 
To make the build 100% clone correct I believe the only changes would be an A1 Profile lower and a CQD sling plate.
 
The gun is in good working condition, the upper has had some model paint applied and partially removed for a subtle “worn” effect but otherwise everything is like new. The PEQ, optic and light all function well also. 
 
I would ideally like to sell this as a complete package but will consider splits for mags/ attachments etc. Current price is inclusive of the entire package!
Open to swaps/ PX for a VFC V3 GBBR 
 
Please PM with any offers or questions
Thanks!
 
EDIT: have had a lot of interest in the mags so would be happy to sell the entire package with 1 mag for £650

includes:
Radio pouch
 
genuine LBT product with tag
slightly used but excellent condition 
contact for further details and pics