L3nny3
-
Posts
155 -
Joined
-
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by L3nny3
-
This advert is COMPLETED!
- For sale or swap
- Used
For sale is a TM HK416c, heavily upgraded by Eagle 6 airsoft. In very good condition with only very minor scratches from use and functionally excellent. Essentially upgraded to the max. Modded for Deans connection and includes a PTS EPF for the ability to use 7.4v LiPo stick batteries without a PEQ battery box. Also includes the stock battery mag and 4 extra TM HK416 standard midcaps. Upgrades and price breakdown as follows: TM 416c: £570 Eagle 6 Upgrades: £582 TM HK416 midcap £28 x 4 = £112 Total= £1264 Upgrade List: Mk-Zero MOSFET Nuprol High Torque Motor Eagle 6 Spring Upgrade Prometheus Purple Rubber Prometheus Nub Prometheus 6.03 Inner Barrel Prometheus Hard Gears Prometheus Bearings Prometheus Spring Guide Prometheus Piston Head Prometheus Cylinder Prometheus Cylinder Head Chronos at around 347 on 0.2G BBs with the Hop completely off. Mainly looking to sell but open to swap/ PX offers, after either GBB or HPA. Would be interested in an MWS mainly. Please PM with any offers or questions Thanks!£680
-
This advert is COMPLETED!
- For sale or swap
- As new
For sale is an LCT PP-19-01, in very good working condition in the original box. Never skirmished, taken out of the box then tested only. Comes with 6 mags including 2 couplers, original manual etc. Some slight damage to the inside of the box, otherwise essentially as new Open to swaps/ px etc for anything except AEGS (Unless TM recoil) Please PM with any offers or questions Thanks!£290
-
This advert is COMPLETED!
- For sale or swap
- Used
For sale is a WE M92 Biohazard in silver, in good working condition with one gas tight mag. Not quite as new but unskirmished and very clean V2 Version with adjustable hopup Stock internally aside from a Maple Leaf Autobot 50 bucking Comes with genuine Pachmayr Rosewood grips Open to swaps/ px etc for anything except AEGS (Unless TM recoil) Please PM with any offers or questions Thanks!£140
-
This advert is COMPLETED!
- For sale or swap
- Used
For sale is a VFC MP7A1, in good working condition. Comes with 5 mags, one has a slight leak otherwise all in good working order. Also includes a clone Aimpoint T1 with a QD mount and the original box Stock internally aside from a Modify Tan bucking and aftermarket barrel as well as original Painted with Krylon camo paints and a digital camo stencil for a Navy Seal/ Devgru look Open to swaps/ px etc for anything except AEGS (Unless TM recoil) Please PM with any offers or questions Thanks!£390
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Looking for one of these mock suppressors with or without a tracer unit inside, in black and not fussed about condition as long as it’s functional. Please PM if willing to sell Thanks!NO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
As above, looking for a clone T-1 or T-2 red dot sight. High quality ideally so Evolutiongear, Holy Warrior etc. preferred but I’ll look at anything After one in Black with a riser mount Please PM if willing to sell, will pay via PayPal thanks!NO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale
- Used
SOLD For sale are two TM MWS 20rd mags, in great condition as pictured. Both gas tight and fully functional, haven’t been used much Happy to do a deal on both Please PM if interested Thanks!£60
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Looking for a single KAC style rail panel as pictured or ideally just the metal locking tab from one. just need the metal tab as a replacement, only one required open to any make/condition/size/colour etc as long as the metal tab is included Thanks!NO VALUE SPECIFIED
-
This advert is COMPLETED!
- Wanted
- Used or as new
looking for a TM or clone spec threaded outer barrel for a 1911, preferably with external threads but will consider barrels with interlaced threads. Not fussed about make or condition as long as the threads are intact Please PM if willing to sell, can pay via paypal thanks!NO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
For sale is a clone DD Omega 7” handguard clone, no idea what make and missing one of the screws. Sold as seen Please PM if interested Thanks!£15
-
This advert is COMPLETED!
- For sale
- Used
SOLD For sale is a set of Resident Evil grips taken from a WE Biohazard. These have never been used so in great condition Please PM if interested Thanks!£15
-
This advert is COMPLETED!
- For sale or swap
- Used
For sale is a Hi-Capa 5.1 based on a TM 5.1 Stainless using predominantly Airsoft Masterpiece parts. The idea of this was to build a high spec race pistol but the ergonomics of Hi-Capas aren't really for me so selling it on to start a new project. This was an expensive build using the best parts possible and as such is now an incredibly smooth and high quality pistol. In the interest of transparency the stock TM grip safety doesn't seem to play well with the Trident sear spring, but other than that the build works flawlessly. Parts and price breakdown are as follows: Tokyo Marui Hi Capa £130 Tokyo Marui Silver Mag £30 Airsoft Masterpiece Infinity 3.9 Railed frame £180 Airsoft Masterpiece / EDGE Norris Silver Slide £85 Airsoft Masterpiece / EDGE Silver Magwell £40 Airsoft Masterpiece Steel Guide Rod £16 Airsoft Masterpiece Ultra Lightweight Blowback Housing (Purple) £35 Airsoft Surgeon Steel Threaded Outer Barrel £60 Airsoft Surgeon Trigger £10 Dynamic Precision Grip £22 (Can be swapped from grey to black on request) Dynamic Precision Grip Tape £3.50 Cowcow Trident Sear Spring £12 Nineball Magazine Routers x2 £13 Maple Leaf Autobot 50 Rubber £6 AIP Hammer Pad £12 AIP 140% Spring (Cut down) £? Total £654.50 Comes with the original black mag and a TM silver mag, both with Nineball routers installed. Also includes the original box and all accessories including manual etc. Tried to price accordingly considering the parts but also that there isn't much of the original TM left. Mainly looking to sell but open to swap/ PX offers Please PM with any questions or offers etc Thanks!£340
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Looking for an M16A1 pistol grip, either real steel or GBB. Can be in any condition as long as it’s intact Please PM if willing to sell, can pay via paypal thanks!NO VALUE SPECIFIED
-
-
This advert is COMPLETED!
- For sale or swap
- Used
For sale is a near-stock Tokyo Marui Hi-Capa, this was bought with the intention of doing a build but has been left as Hi-Capa ergonomics aren't for me. This is all original aside from a Maple Leaf Autobot 50 bucking and an RMR mount, the mag also has a Nineball gas router installed. All working perfectly, almost new. Original box and all accessories also included as pictured. Open to swap/ PX offers but mainly looking to sell Please PM with any questions or offers Thanks!£110
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale or swap
- Used
From left to right: Magpul ACS SOLD Genuine Magpul ACS stock, in good used condition. Mil-Spec and has storage compartment as pictured Tokyo Marui Tan Crane £25 Taken from a MK18 MWS, in good condition and not used much. As stock Clone B5 SOLD Clone B5 style stock, missing the rear padNO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale or swap
- Used
Magpul PTS AFG £15 In tan, good condition. Includes all screws as pictured£15
-
This advert is COMPLETED!
- For sale
- Used
Make: Tokyo Marui Gun/Model: MK18 Accessories: 4 mags, Sight, peq, light, grip etc Condition: Used, very good FPS: Stock For sale is a TM MK18 GBBR, just preordered a Northeast Uzi so freeing up some space. This is a close to 100% Clone correct MK18 Block II build with accurate accessories. Includes a load of extras as seen, all in good working condition. The mags have been Green Gas modded and the MWS has a Maple Leaf hop rubber and 150% Nozzle springs for green gas but otherwise everything is stock and mostly like new. Includes: TM MK18 4x Mags EvolutionGear Elcan SpecterDR 1-4x Element PEQ 15 Element M3X Light Element Dual Switch Hogue Overmolded Grip Gunsmodify High Tenacity MWS Buffer Clone tan rail covers Clone tan MOE RVG Original TM grip and buffer RRP of everything is over £1000 so tried to price accordingly. The Specter, PEQ and Light are all like new and unskirmished, everything else is in perfect working condition. Also includes a case and lens protectors for the Specter as well as the full set of stickers for the PEQ and light. Also have the original box with all accessories, manuals etc. Mainly after some cash but will consider PX offers, also would like to sell as a package but will consider splitting if there’s enough interest in individual items. Please PM with any offers or questions Thanks!£670
-
This advert is COMPLETED!
- For sale or swap
- Used
For sale is an Army M1911A1 in Silver, complete with all US M1911A1 markings as pictured. Comes with a Gas mag but has CO2 frame cuts so can accept gas or CO2 mags. Has had all external parts aside from the slide and frame professionally Cerakoted in H-151 Satin Aluminium aside from one of the grip screws and the slide release which is Steel. Otherwise stock aside from cut down Pachmayr style grips and a Maple Leaf Autobot 50 bucking. In decent condition overall, however quite picky with mags and the lock back on empty fails more than it works. Does fire and cycle well enough though, good base for a project. Open to trade/ PX offers but mainly looking to sell Please PM with any offers or questions Thanks!£115
-
This advert is COMPLETED!
- Wanted
- Used or as new
Looking for a low profile chest rig, open to any colour and condition as long as it’s functional. Ideally after decent brands but will take a look at anything please PM if willing to sell thanks!NO VALUE SPECIFIED
-
This advert is COMPLETED!
- Swap only
- Used
Make: ASG/ KWA Gun/Model: MP9 Accessories: 2 mags, suppressor, hop rubber Condition: Used, good FPS: ~1J Pictures: Below Up for trade is my ASG MP9, all in good condition and with everything pictured except the sight (can include depending on package). Has the CQB bolt installed for roughly 1J, also have the original box for it (not pictured). Looking to trade/ PX ideally for a VFC MP7 Gen 2, (preferably GBB) or a WE apache (preferably MP5SD). Open to offers for other trades as well, mainly into GBBs though. Please PM with any offers or questions Thanks!NO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale
- Used
For sale is a WE M16A1/ XM177 in good used condition, bought for a project but no longer required. Sold as seen, some scratches here and there and without the rear sight parts. Please PM with any offers or questions Thanks!£40
-
This advert is COMPLETED!
- For sale or swap
- Used
Make: G&P Gun/Model: M16A1 Accessories: 4x 30/120 PMAGs, Colt A2 Handguard, Carry handle rail For sale is a G&P M16A1, this was purchased second hand with upgrades, however I’ve lost the list so not sure what they are. Recently had a Gate NanoASR fitted, Deans conversion and a service by Zero One, so cycles and runs really well. Externally it’s solid aside from a questionable paintjob which has been partially removed from the upper receiver. The furniture hasn’t been painted by the looks of it. Also has a small gap between the handguard ring and front sight as pictured but doesn’t affect anything, and is missing the charging handle spring. Otherwise all nice G&P quality. Fitted with a real steel Colt M16A2 handguard and a carry handle rail mount. Also includes 4x 30/120rd PMAG-style midcaps (1 pictured). Price breakdown: G&P M16A1 £280 Gate NanoASR £20 Colt M16A2 Handguard £25 Carry Handle Mount £10 30/120 PMAGS 4x£10= £40 Total £375 Looking for around half the price so £190 considering it needs a new paint job, also don’t have the original box for it. Happy to do a discount and throw in some LiPos if collected. Open to offers including trades and PX for GBBs potentially. Please PM with any offers or questions Thanks!£190
-
This advert is COMPLETED!
- For sale or swap
- Used
Make: Tokyo Marui Gun/Model: M4 CQBR/ MK16 Accessories: PTS MBUS, MLOK Grip/covers/rail Condition: Used, good For sale is a Tokyo Marui Recoil Shock M4 CQBR built into a MK16/ URGI style rifle. Internally has had a Camoraids Stage 1 Upgrade and just had a Gate Titan fitted by Zero One. All runs and functions flawlessly. Externally in very good shape with a few scratches and nicks as pictured, has had the upper cut to fit the handguard also. Fitted with an HAO MK16 Bronze handguard and PTS MBUS sights. Lower has been sprayed with Krylon Camo paints. Breakdown of cost: TM Recoil CQBR: £450 Gate Titan Basic: £115 HAO MK16 Handguard: £80 Canoraids Stage 1 Upgrade: £120 CNC Nozzle: £10 PTS MBUS: £50 MVG: £10 Total: £835 MLOK covers thrown in Looking for around £450 considering it’s used and I don’t have the original box or a spare mag for it. Does come with the Titan box and patch however. Happy to do a discount if collected and can throw in a couple of 7.4v LiPos as well. Open to offers including trades and PX for GBBs potentially. Please PM with any offers or questions Thanks!£450
-
This advert is COMPLETED!
- For sale or swap
- Used
Make: VFC Gun/Model: VP9 Accessories: 3 mags, grip sets Condition: Used FPS: Stock Splits/Swaps/Part Exchange: N/Maybe Price/Payment: £90 Pictures: Below For sale is a VFC VP9, in overall good condition with one issue. The right hand side slide release does not function and can rotate freely, however the left slide release functions fine. The gun still locks back on empty and otherwise functions as it should. Comes with 3 gas tight mags, these have been marked with small scratches as pictured. Also includes the full set of adjustable grips (3 sizes) and the original box. Mainly looking to sell but open to swaps/ PX Please PM if interested Thanks!£95