RohanAlex123

Got myself a mtw a few weeks back and have recently put a new barrel and hop rubber in. I left my regulator and bottles in the car by mistake a few days ago when it was really hot. They had about 1.5k psi left in and when I got them out I think they were about 500psi ish. Ever since then I've struggled with really inconsistent shots from my mtw. Have to crank the reg up to 100 psi just to hit the range I used to off 60psi. Haven't checked the fps as I don't have a crono. I've only just noticed that when I put the reg on and fire a few shots my reg psi seems to creep all the way up to over 160psi. See video. 20220617_200429.mp4 Do you think it's a regulator issue or something to do with my engine?

So when I got the bottle I did notice a small leak on the bonnet I think it's called. I tightend that down a little more and filled up. Still q small leak. So I took it off and replaced the 0 rings. Seemed to worna treat until at 2kpsi it popped the burst disk. From reading the above I do believe it was a faulty bottle. I'm going to return it tomorrow morning. My compressor is a amazon one. I had a bog standard moisture filter but I've stuck a massive one on as a preventative measure. It's only as old as the bottle so shouldn't be the issue. I'll get a new bottle tomorrow and report back Thanks guys

So I had the hpa tank filling up at the time. The only regulator I had on was the built in one. Should I have my gun regulator on the tank too? Don't think I should but I don't feel like it was poor manufacturing and kinda hope I just did something wrong so I can learn from it etc etc. Tia

Hi all So I got my hands on the valken 3000psi hpa bottle yesterday. Went to fill it up and suddenly at around 2k it blew up and no longer holds air. The leak is around the 1.8 nut? I take it that's a burst disk? If so why would they advertise 3000psi and not allow it to do that. TIA

Hi Does anyone know if the CQB Russian hpa taps work with the novritch mk23 mags? I know the taps work with genuine tm mk23 mags but is there any difference? TIA