Livemech

Well I have stripped the gearbox like hour ago and looked through)) Found out that the gears needs to be shimmed as the bevel gear is a bit loose and wobles around. On a trigger side I think the metal selector has worn out a bit and is cousing the issues as it does not releases the contacts after you press the trigger sometimes, and I have cleaned the electrical contacts aswell. If not gonna help I just gonna pull my finger quickly on fully auto) It is not so hard as I was expecting.

today in the end of the game i have put in semi it clicked few times nothing happened, sticked in auto and it fired ok, semi again, push trigger down and holded it and still fired like in auto.... released and pressed again, nothing again... that`s what happends basically, i think inside should be like circuit breaker isn`t, which is breaking it most of the times or is worn.

Oh ok, thank you, will know for the future Also I am experiencing a issue with semi-auto, some times it shoots, sometimes no, I have seen that usually it is a "selector rod" in a gearbox issue on this models, any suggestions?

what is wrong with G&P motors?

Hello again, just little report. Changed the spring to Guarder SP110 and replaced the hop up unit arm with stock instead of the one which came with new hop up unit and using the flat hop. All this made me happy today. The FPS has increased to 330 on 0.2 and 320 on 0.25. Very impressed that fps did not drop much on .25s. The range after adjusting the hop up was awesome. Just what I was expecting from my rifle. Also have got a G&P m170 motor coming soon and then thinking of buying Madbull Black Python Ver.2 6.03 tight bore and putting 9.6V battery. Thats the plans for the moment After that will save some money for a RIS on a front and Susat scope, oh and need to buy a pistol, probably it will be first. Thank you guys for your help.

Yep, the nub is the same as on picture. I have looked more inside the hop up and found out that arm which they send with hop up has a bit shorter "hill" for nub, so I just put a old arm and now it looks much better. About springs, thanks for advice, that is what I was wondering what is difference for normal gun and psg-1 spring, but could not find straight answer. Now will know which type to buy as a lot of them say - not suitable for psg-1.... Maybe you can advice which spring is it better to buy as well?

It is appiering but not as much as with old rubber, I assume that it is because there is no bump on a new bucking. I have glued the nub to the arm so that it does not jump out, hehe.

Thank you guys, for advice. I have got a Guarder sp110 spring which should bring me to 350 fps, but will check the fps only on sunday as I do not have a chrono at home. About nozzle, I have bought original G&G L85 nozzle, looks and size is same as old, so assuming it is ok. The hop up rubber was replaced as I bought a flat hop. "Modify flat hop" it is called. The only thing that I am concerned is the little circle on the end of the hop up unit, is it very important? I am a bit worried about hop up itself as even on max settings the bbs do not curve up, same was with old hop up as well. The only difference with old hop up it was flying out of gun quite high like going into the sky and dropping down, when as I understand, with over hop it should just fly straight and in the end curve up, or no? Now with new, on max settings it flies ok out of barrel but never curves up just drops. Should I clean outer barrel as well, because I am cleaning inner barrel after each game using ProTech guns TEFLON PTFE oil?

Hello, everyone. Have played airsoft for 4 moths now. Played with rental guns on a good site so have got some experience but not much. Have got my UKARA and now in a stage of gearing up slowly. Few weeks ago bought a second hand G&G l85 carbine, researched about it and it looked like a good deal, it looks ok. But the shooting from it in first place did not impress me much. I have got 260 fps out of it on .2bb... when people say they`ve got about 330 out of box....grrr ok, but the range was not great either. OK, said I, lets look what can I do with it) First cleaned the inner barrel out, which did help with range but not as much as I wanted. Next step was changing the spring to increase fps a little bit, bought a PDI 120% spring for AEG, when it came in it was shorter then the one which was fitted before.... ok... maybe I am not so top tech yet, so installed it to check what happens. The fps gone to 280 on 0.2bb. To be honest I was expecting much more. In same time the Lonex metal hop up unit with flat hop arrived, installed them, apparently it is good mod for range. Yes, the range did increase but still does not go further then 20-25m as I can see, in a game it is impossible to compete to another m4 and g36.... Also changed a air nozzle as old had some wear on the end. I am using the 0.25bbs as they still more accurate than the 0.2. Did the check of the cylinder and stuff when I compress piston and hold nozzle with finger in looks gas tight. The carbine inner barrel is not so long and I am thinking if there are any chances to buy outer barrel from ics L86 and fit into it or just get standart L85A2 outer barrel as it has got 510mm inner barrel comparing to my 407mm. As longer inner barrel is better for range as well, isn`t? Any suggestions what to do to increase fps and range a bit more, please? Also about the spring lengths, is there any standart for some gearboxes or it is all about metal and wire thickness? Thank you,