Randymanpipe

In Garand Thumb tip-to-butt style...
 
E&L AK105 platinum base gun with outer barrel shortened 1" along with Keymod VS-24 handguard and VS-33 railed gas tube (all parts TWI brand). Cerakoted Midnight Bronze. Also 2x RS BCM Keymod 5 slot rail sections. DTK-2 muzzle break and Putnik suppressor which has been machined out internally to make it lightweight, and a machined swiss tube and foam rings installed to make it functional and very effective (all parts TWI brand). Billet barricade stop & PEQ15 with remote & mounts. RS Zenitco RP-1, charging handle & RP-1, dust cover button & side folding button Cerakoted in Coyote Tan. Cyma railed dust cover, perfectly fitted and tapped to take nice low cap heads, Cerakoted in Burnt Bronze. Cyma tactical selector, perfectly fitted and shimmed - the most satisfyng AK selector ive ever used - Cerakoted in Patriot Brown. 6x Arcturus AK12 magazines Cerakoted in Patriot Brown, mag base plates Cerakoted Vortex Bronze. Cyma AK12 pistol grip perfectly fitted. Lower receiver with side mount plate removed, all edges smoothed, barrel, gas block & frotn sight Cerakoted in Springfield FDE. Magazine catch modified to be extremely tactile and secure - no accidental mag drops! Asura Dynamic folding stock adapter, custom brass pivot pin shims, custom stainless latch catch plate Cerakoted in Springfield FDE. RS AR15 buffer/stock tube, nut, locking plate. RS Magpul CTR stock in ral 7008 and Cheek Riser. Blue Force Gear sling on Magpul RSA  
Internally fully worked, 345 fps on 0.2s, 20 rounds per second, volume matched for 0.36s to give 65M range.
Very quiet, very slick controls, balanced weight 3.5-4.3kg depending on attachments.
 
Gate Titan with 2x 11.1v batteries, comms lead included & moral patch. Guarder SP110 fitted, SP100 included to drop FPS to 325. ASG 22k Ultimate motor Lonex helical bevel / pinion SHS 13:1 gear set Sector delay chip Oil impreg bushes Prommy BB spring guide Prommy piston LPE piston head Lonex type 1 cylinder ASG ultimate cyl head Airsoft Pro O ring nozzle E&L hop unit R-hopped SixG Rhop Prommy 340 barrel Rhop G&G green bucking  
No expense spared build (Total build cost £1448), is a joy to operate wether you actually play with it or do bedroom drills, i dont know what to say really, i dont wanna sell it but ive got to really.
 
The paintwork/colours have been done to work very effectively in many environments - woodland, urban, arid.
 
Genuine Eotech +£500 XPS2-0 (8 months old)
 
Vids now up;
CHRONO / INFO https://youtu.be/66jjGx93ksA
60M SHOOTING https://youtu.be/Wj9InPcFIVA

Started life as a ngrs cqbr then modded a G+P carry handle upper and outtrr barrel to fit the TM lower.
 
 
 
Internally;
 
Polished and radius gearbox
 
Steel bushings
 
Shimmed
 
AOE correction
 
Laylax hardened gears with helical pinion and motor gear.
 
Fsp prototype full steel teeth piston and head. 
 
Gate titan
 
Prometheus tappet plate
 
30k boost motor
 
Edgi 5.98m barrel r hopped (lift anything you wanna use)
 
Stronger recoil spring
 
 
 
Being full steel teeth I run it on 11.1v batteries for any extremely snappy trigger response.
 
This Rif being front wired the spring can be easily swapped out for different FPS depending on sites you play at.
 
 
 
Front wired into the hand guard so can run bigger battery's.
 
 
 
Real steel car-15 stock and pad
 
4 mid cap mags.
 
 
 
2nd and 3rd pics are how it looks atm paint will clean off with spirits if not your taste.
 
 
 
Have a the aimpoint comp2 available for extra from the first photo.£200
 
 

Here we have my x2 scout tac lights. 
A M600 & M300.
 
the M600 is a super bright 600lumen white light version with full trades and pressure switch only. 
This cost me £54 couple of months ago and have upgraded to a real one with iR function hence the sale. £40
 
the M300 is an element tac light with no trades, pressure switch and additional push button thumb switch. 
Idea for smaller builds (Iv been using on a ak with swan neck rail but have since sold the ak) £25 SOLD
 
Both are in fully working condition with no faults amd all original packaging.
 
price is to your door 
 
any questions dm me. 

price is delivered to your door. 

 
 
 
 
 
 

Selling my Gen 3 pvs-14 as am upgrading to duels. 

Have had this unit for about 4 years, used for a total of about 25 hours. 
no Blems or spots, really clean tube. 
great performance. 

It’s ex US export stock so no worries about MoD getting funky if you turn up to an event at a military training area with it.

here’s some blurb about the tube:
The ITT Gen3 PINNACLE© (F9815) tube is the same type of tube used in the MILSPEC AN/PVS-14 for standard issue. As discussed above, these tubes have incredible light-gathering capability. But, the use of the thinner thin film causes them to be more sensitive to recoil when mounted on a weapon. Thus, PINNACLE© tubes are only rated for use on 5.56x45mm NATO weapon platforms. Since this is the standard issue cartridge for NATO, the military was cool with it, and it became the standard issue tube for the PVS-14 monocular. Technically, these are commercial grade tubes only because ITT Exelis does not sell MILSPEC tubes on the commercial market. If given the opportunity to undergo the MILSPEC test, they would most likely pass, but MILSPEC testing is an added cost and logistic.
 
it comes with case, rhino arm but no mount as I upgraded to a wilcox mount. Some additional accessories are included in the case. *amber filter not uncluded*

would ideally do the deal face to face am happy to travel due to the value of the item. 
item is located in the GU35 postcode area.
 
buy with confidence from seller with high positive feedback! 
 
any Questions just drop me a pm.
 

Selling my Gen 3 pvs-14 as am upgrading to duels. 

Have had this unit for about 4 years, used for a total of about 25 hours. 
no Blems or spots, really clean tube. 
great performance. 

It’s ex US export stock so no worries about MoD getting funky if you turn up to an event at a military training area with it.

here’s some blurb about the tube:
The ITT Gen3 PINNACLE© (F9815) tube is the same type of tube used in the MILSPEC AN/PVS-14 for standard issue. As discussed above, these tubes have incredible light-gathering capability. But, the use of the thinner thin film causes them to be more sensitive to recoil when mounted on a weapon. Thus, PINNACLE© tubes are only rated for use on 5.56x45mm NATO weapon platforms. Since this is the standard issue cartridge for NATO, the military was cool with it, and it became the standard issue tube for the PVS-14 monocular. Technically, these are commercial grade tubes only because ITT Exelis does not sell MILSPEC tubes on the commercial market. If given the opportunity to undergo the MILSPEC test, they would most likely pass, but MILSPEC testing is an added cost and logistic.
 
it comes with case, rhino arm but no mount as I upgraded to a wilcox mount. Some additional accessories are included in the case. *amber filter not uncluded*

would ideally do the deal face to face am happy to travel due to the value of the item. 
item is located in the GU35 postcode area.
 
buy with confidence from seller with high positive feedback! 
 
any Questions just drop me a pm.
 

This absolute beast of a gun has to be seen to be believed! The rate of fire and build quality is just out of this world. Unfortunately, it’s just too heavy for me these days and I’m moving away from the LMG support role to a more chilled out sniper role. Otherwise I wouldn’t let her go

This has a fully upgraded mag box which now holds 7,500 bbs so you’ll never run out of rounds! It’s also had the gears and piston upgraded by professionals so the internals are sturdy to cope with the constant rate of fire. This gun has no issues and fires like a dream. 

Comes with
two batteries and a sling

This will need to be collected as it’s far too heavy to be posted. 

Please feel free to call or message on 07852505115

LCT underfolder with real steal mid west industries hand guard which was £175 on it own. 
Railed dust cover fitted. 
Internals upgrades by The Cage airsoft including
ASG ultimate piston red
ASG ultimate conical piston head 
ASG infinity CNC U-30000 HT/SS motor 
ASG ultimate high speed 16:1 gears
jeftron V3 processor(moisture proofed)
 Shooting about 350fps 
Also I’ve got plenty of mags to make this a nice package.  
 
Can post or be collected. 
Postage and Paypal fees will be buyers responsibility 

This is my never-skirmished LCT AK74 with a Daytona Gun kit installed. Selling because it's been sitting in its case for close to a year now. I suppose this is as technically 'new' as you could get a kit like this - the only thing 'used' would be the actual shell of the receiver, but even this has been sand-blasted and refinished. Nothing else has ever been used except for running some BBs through the gun during installation.
 
The gun itself is Cerakote'd in a mix of gunmetal grey and titanium, so it has a slightly blueish hue to it. Hopefully the camera picks this up, but let me know if you want more pictures.
 
Internals
Datyona Gun gen 3 LCT/E&L AK kit from Blackblitz (though I installed this myself) https://www.daytonagunairsoft.com/collections/conversion-kits/products/daytona-hpa-lct-ak-rpk-kit EU-spec high pressure line (please note this carefully as you will need an EU-spec hose for your HPA rig - these cost around High RoF recoil spring POM crush ring Has had around 2000 rounds shot through it - will need a further 6000 cycles for break-in  
PDI 6.03 barrel Flat hopped  
Externals
Cerakoted by Hi-Spec Coatings Real steel MOE AK grip (modified internally to fit the Daytona Gun kit Real steel BATTLELINK Minimalist milspec Stock
Ambidextrous magazine release - Hephaestus I believe, but could be wrong
Hephaestus type A selector
Clone MOE angled foregrip (modified heavily to fit up against the mag well)
Asure Dynamics B10M set (the rail)
LCT stamped top rail dust cover
LCT TK104 stock tube
Madbull sound hog
 
Extras
5x MAG midcap 100rd magazines with genuine Magpuls Nuprol carry case with custom foam (pick and pluck but then sealed over with sprayable vinyl for longevity) Carry case has a cutout for the Holosun HS510c being sold here: https://airsoft-forums.uk/classifieds/item/6207-holosun-hs510c/  
Delivery & Payment
If you really want to 'gift' your PayPal payment based off my previous feedback I will knock off half of whatever the fees are I will accept a return of this in un-skirmished condition within 30 days with no questions asked. I will also pay half of your return postage fees Delivery will be by Parcelforce 48 and I can dispatch within 3 working days of payment (probably sooner but can't be sure). I'm away for on week at the end of September and won't be able to post during this time  
I'll accept offers but please keep them reasonable. The amount of labour that goes into pulling together a DG kit is quite high so keep that in mind when considering your offer and check Blackblitz if you want an idea of what kind of value is in the kit and labour itself.
 
If you have never owned a DG before please do your research (I can answer any questions if you buy it) and consider the additional cost of buying decent lube for this gun. GetSome1000 is recommended and I can provide a bottle to get you started (not easy to get in the UK).
 
I'm not really after swaps unless it's a pistol + cash my way.
 
My availability during the days and evenings is very limited so viewing it in person will be difficult. This is why I offer a 30 day returns period and will pay half of the return postage if you change your mind.