Droven

I have ordered a new mosfet, I tried active brake no change it locked up with the guarder sp100 spring although I didn't cut it down yet. I will test it with the Eagle 6 m100 spring and new mosfet when it arrives I went with the gate v2 ngrs. Sorry what do you mean by offset? I did re grease it all and clean everything I have got a new spare piston but the current one is still in pretty good condition

yup, I think it might be the mostfet or maybe its as Adolf Hamster said and extra power is just to much, i did have the Lonax A1 in which I thought was the cause after going to deans so that's when I swapped it with a ASG 30k torque instead 😕

yup but I haven't used the gun in like 2+ years now ergo the service and power switch to deans. it just baffles me since I use normal ratio gears with mosfet and a not crazy powered battery 😕

the internals haven't changed had them for couple of years I lubed the gears and changed to deans power connector. it was only after the deans swap the issues started and thats when i changed motor and spring. still getting the issue tho and I only use 7.4v 25c LiPos I think I might have the original trigger contacts still it is possible the mosfet has had its day and yes it is the spectre

Gearbox: Spring (New) Eagle 6 M100 (I have just got a Gaurder SP100 spring too but I have not yet tried inside the gearbox) Gears Motor Mosfet Black talon V2 (I have tried active break but still double firing on semi) Piston Piston Head Cylinder Tapper plate Air nozel Lonax Hopup Maple Leaf nub and rubber Prometheus barrel I have probably missed something but I think thats everything. Yeah defo deep end

Hello my fellow Airsoft enthusiasts. So I recently decided to service my TM HK416D and while I was at it switch the power over to Deans. This is where my problems began so the gun is now double firing/over spinning since I moved over to Deans but I am not convinced this is the root cause of the issue. any advice would be welcomed as I am starting to pull my hair out and I have spent over £700 on parts for this gun. Spring (New) Eagle 6 M100 (I have just got a gaurder SP100 spring too but I have not yet tried inside the gearbox) Gears Motor (Was a Lonax A1 but I changed to the ASG due to the double firing issue) Mosfet Black talon v2 (I have tried active break but still double firing on semi) Piston already has extra tooth removed bringing total 2 removed Battery 7.4 25c LiPo I Wont bother to list the rest of the gearbox but its all Prometheus or Lonax replacements nothing inside the gun is stock. Anyone care to throw there experience at it would be greatly appreciated.

well i took my hk416 to my first woodland game today but unfortunately didn't even get to use it due to the trigger talk adapter breaking i have left it with the tech guy to fit the lipo conversion, and on another note my parts arrived and I managed to get my gear set changed for the promethus ones thank you for this advise I done it just in time my m100 spring arrives Monday ^^

thanks for the help guys, I spoke to a few people before I did place the order who suggested the different parts, although not all together and the motor was just me the gear set was swapped out for the Prometheus ones in the end anyway I do have also got a M100 spring awaiting a pick-up. I can always return the parts that are not quiet right. I have arrange already with the organiser of my local site to have he's tech guy fit these parts nothing will be done by me

ah that's a good bit of information, ill see if they can change the barrel I think when I ordered it I thought it was the 6.02 rather then 6.2 :/ might be to late but i can always return it also I probably should have cropped the price out but nvm next time! thanks for the input guys!

hey everyone, this is my first forum for airsoft so id like to say hello to everyone, im 23 from London and play at red 1 cqb airsoft, Im relatively new to airsoft and its now my favorite pass time apart from pc gaming i recently purchased a Tokyo marui HK416D which also is my first real AEG i decided why not shoot for the best. so ill attach a invoice of my hopefully god like internals i plan to beast out my 416 with any suggestions and feed back also appreciated Happy airsofting all! Regards, Droven