Glock(s) - I've done something stupid and need some help

P

PoliteRacoon

Members
Joined
Sep 30, 2024
Messages
8
Reaction score
4
Hi guys,


I have been incredibly dumb and taken the slide off my Glock 34 and put it on my g19 because I thought it would look funny...! now can't get it off. It's stuck all the way back and I can't make it budge. They're both WE if that helps.


Can anyone suggest anything?
 

Attachments

  • IMG_6470.webp
    IMG_6470.webp
    221.3 KB · Views: 19
Yep I could have done the same thing. Every now and then I get a stuck slide too and often its the hammer thats stuck. So if you can reach in under the slide from the rear with something ”hook shaped” and pull the hammer back that might to the trick.
If that doesn’t help I’d remove the screw holding the rear sight and bbu just to loosen stuff up and then just use brute force. I,e gently tapping the rear plate with a hammer (have some cloth in between obviously) , a vise helps.
Good luck and keep us updated!
 
theSwede said:
Yep I could have done the same thing. Every now and then I get a stuck slide too and often its the hammer thats stuck. So if you can reach in under the slide from the rear with something ”hook shaped” and pull the hammer back that might to the trick.
If that doesn’t help I’d remove the screw holding the rear sight and bbu just to loosen stuff up and then just use brute force. I,e gently tapping the rear plate with a hammer (have some cloth in between obviously) , a vise helps.
Good luck and keep us updated!
Click to expand...
Click to shrink...
good advice on the (firing) hammer, I’ll give this a go when I’m back tomorrow!
I feel incredibly stupid
 
If you look in the ejection port, has anything popped up from the frame that blocks the BBU? I had a TM Glock with an aftermarket slide that would get stuck to the rear if it was pulled back too far. It just needed something to depress whatever bit that is that pops up. I can't remember it's name.
 
hitmanNo2 said:
If you look in the ejection port, has anything popped up from the frame that blocks the BBU? I had a TM Glock with an aftermarket slide that would get stuck to the rear if it was pulled back too far. It just needed something to depress whatever bit that is that pops up. I can't remember it's name.
Click to expand...
Click to shrink...
Just wanted to let you know this was precisely the piece of advice I needed! Thank you so much dude!
 
You must log in or register to reply here.

Similar threads

F
Help with golden eagle m8879 shorty
Replies
2
Views
239
BigStew
B
D
Silicone gas for GBBR
Replies
2
Views
132
Impulse
Impulse
M
EMG / golden eagle strike industries m870 handguard
Replies
1
Views
554
Flynn
F
Back
Top