• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Recent content by ajumma

  1. A

    I absolutely can't recommend these shitty 3d printed Warmags. I got one and within a few months...

    I absolutely can't recommend these shitty 3d printed Warmags. I got one and within a few months, it was broken, along with both spare crank arms they sent me. You're MUCH better off buying a proper odin innovations speed loader and using a 3D printed adapter by Airsoft Tailoring: Odin...
    • ajumma
    • Profile post comment
  2. A

    THE TM MWS thread

    If you tried your friends bolt and it works fine, then maybe buy a new bolt? ? Try following a YouTube guide and disassembling the bolt, then you can check to see if anything is out of place. What exactly is going wrong?
  3. A

    THE TM MWS thread

    I’ve been testing the G&P 46rd PMAGs for a few days now and thought I’d give a quick write up on here. I got a chance to use them all day in CQB so I feel confident in their capabilities in the short term.   First impression: “boy this thing sure is long”. The magazine locks positively...
  4. A

    THE TM MWS thread

    SSPKali pretty much answered this already. I can say that if you want to use a tracer unit, this kind of build can be really effective as you can tuck the tracer into the handguard and avoid that extra 3-4 inches of length. I’ve done that with my Angrygun mcmr and acetech blaster. 
  5. A

    THE TM MWS thread

    Yeah I literally knew this, but some other guys were claiming that silicon oil in their trigger box worked really well so I went with that, but luckily in the end it was just 15 minutes of work to clean it out, apply lt2 grease and problem solved! Definitely keeping silicon oil WELL away from my...
  6. A

    THE TM MWS thread

    I started having this issue as soon as I put a single drop of silicon oil into my g&p/RiW trigger box lol. Literally a single drop of silicon oil onto the semi/full auto sear and it completely stopped working.    My stock trigger box had the same issue. As soon as I started using silicon...
  7. A

    THE TM MWS thread

    Red gas runs at higher pressure than green/nuprol 2.0, so I would be wary of accelerated wear on weak parts like the nozzle spring and buffer. Aside from those though, it’s perfectly safe to use red gas depending on the ambient temperature.  I used Nuprol 3.0 between 4 and 12°C with great...
  8. A

    Tokyo Marui Akm GBBR Release Imminent

    If it's compatible with already existing aftermarket AK parts, GHK have a serious contender to deal with. But knowing TM, it's not going to be like that at all ? 
  9. A

    THE TM MWS thread

    Like I said, there is a use case here where it is too cold for any kind of propane based gas and you really want to use your MWS, HPA is the only option ? It’ll be clunky to operate but you’ll get an awesome and consistent fps even in the coldest environments.  
  10. A

    THE TM MWS thread

    I mean don't get me wrong, I totally agree with you on the negatives here. Apparently Gunsmodify will make CO2 (Devil Hunter maybe?) version of their PMAGs, which will be perfect for when there's temperatures low enough that green gas/propane completely fails. Tapping your GBBR mags should only...
  11. A

    THE TM MWS thread

    HPA tapping your MWS mags when it gets really cold shouldn’t be such heresy lol. I’ve run my MWS at 3-4°C on Coleman propane with fairly good results, but I was semi only and purposely firing more sparingly that usual. I tried running it at -1°C with black gas and it was not useable at all...
  12. A

    THE TM MWS thread

    I'd recommend messaging RuninWorkshop on Facebook. They usually reply extremely quickly and they know this trigger box inside and out. It's likely that you haven't adjusted the grub screws properly yet. I think someone once told me that straight out of the factory the trigger boxes are shipped...
  13. A

    THE TM MWS thread

    Interestingly, the dead trigger issue started happening after I took my trigger box apart, cleaned out all the gun and old grease, then reassembled with a little silicon oil on the contact areas around the different sears. I thought I had over-lubed it, so I took it apart again and cleared out...
  14. A

    THE TM MWS thread

    My long awaited (I say long, it literally arrived in 3 business days- posted Wednesday, arrived Monday) new trigger box. My stock trigger developed issues and I was always unhappy with how it felt.  First impressions were wow, the construction is SO much cleaner than the stock trigger box. I...
  15. A

    THE TM MWS thread

    Hmmm that's really strange. Definitely never heard of it happening with a stock bolt. I can't imagine a different bucking/nub or buffer would have any effect here. You could try putting the stock buffer in and seeing if works? 
See more
Back
Top