• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Quick appraisal please? (pic heavy)

  • Thread starter Thread starter RektnNekt
  • Start date Start date
Around £100 and you would be better off splitting accessories not mounted to the gun and selling separately.

 
i agree with Esoterick, split the accessories, you will make more that way

 
£100? That was a lot less than I was expecting. Could you PM me with possible prices for each piece? I've only got about 2 weeks

 
cm16's are only £130 new. put the gun back to standard if you can, that should then be worth £100

sell accessories separate.

How much did you pay for it?

 
150 for all of it (excluding g18c and mask). Very bad timing.

Checked the G&G GOS V1 stock and CAA handguard, they're worth about £100 new. Why are they now worth nothing? They've only been used to fit on the gun

 
Last edited:
I'd be interested in the mid cap mags, silencer, speed loader and rail covers. Would you take £30 plus postage?

 
150 for all of it (excluding g18c and mask). Very bad timing.

Checked the CAA stock and handguard, they're worth about £100 new. Why are they now worth nothing? They've only been used to fit on the gun
You could get 150 for all of it.

the reason people say to put it back to standard and split the accessories, is it should sell a lot faster, and you may make more selling it separately.

 
You could get 150 for all of it.

the reason people say to put it back to standard and split the accessories, is it should sell a lot faster, and you may make more selling it separately.
Well it was 150 + 15 postage - I can't put it back to standard because it hasn't got the standard handguard, inner barrel or hop up.

As for the splitting of the mags/suppressor/covers/speedloader, I'd need be sure that I'd still be able to get some money from the rest.

If I can't at least break even, then I'd rather hang on to it or swap it and sell some other stuff.

 
Last edited:
The problem is, unless the price is heavily discounted from new, the prospective purchaser can buy a new one directly from the retailer with a warranty and less risk.

At the cheaper end of the scale, % reduction doesnt amount to much in £.

Admittedly you might have put a lot of investment into the accessories but its a custom/bespoke gun so you will only get a decent price if players appreciate the true value. Most will want or appreciate some but not all. Its a bit like ordering a car with all the options then wondering why you dont get your money back at time of sale.

 
Last edited by a moderator:
150 for all of it (excluding g18c and mask). Very bad timing.

Checked the CAA stock and handguard, they're worth about £100 new. Why are they now worth nothing? They've only been used to fit on the gun
They're only worth that much if they're genuine CAA parts which they probably aren't (there's plenty of cheap Chinese copies out there).

 
They're only worth that much if they're genuine CAA parts which they probably aren't (there's plenty of cheap Chinese copies out there).
They are the genuine ones. They're complete with all the markings and what not. I saw a few Chinese copies when searching for a price, and they're definitely not the ones I have.

For example, the Chinese handguards don't have things like the CAA trademark on it and were roughly finished.

 
Last edited:
They are the genuine ones. They're complete with all the markings and what not. I saw a few Chinese copies when searching for a price, and they're definitely not the ones I have.

For example, the Chinese handguards don't have things like the CAA trademark on it and were roughly finished.
Doesn't matter, you'd only get £100 to £130 max for it. You don't buy airsoft guns to break even or make profit, you buy them to have fun with them, then when you fancy a change you sell it for a low price to aid funding another gun or swap it. You'd get nothing but £100 guns offered for your CM16 as a trade, it's pretty much the baby blocks which everyone starts with. Nobody would pay access of £130 if you're lucky. Heck, I'd only pay £120, worth about £100. Nobody cares about a fancy stock on it, a stocks a stock, nobody would pay more than it retails for unless you have some "ultra custom" P* build or just a load of magazines, upgrades, batteries etc etc.

 
Doesn't matter, you'd only get £100 to £130 max for it. You don't buy airsoft guns to break even or make profit, you buy them to have fun with them, then when you fancy a change you sell it for a low price to aid funding another gun or swap it. You'd get nothing but £100 guns offered for your CM16 as a trade, it's pretty much the baby blocks which everyone starts with. Nobody would pay access of £130 if you're lucky. Heck, I'd only pay £120, worth about £100. Nobody cares about a fancy stock on it, a stocks a stock, nobody would pay more than it retails for unless you have some "ultra custom" P* build or just a load of magazines, upgrades, batteries etc etc.
Funnily enough, first status I saw after this was someone divided between 2 'fancy' stocks. But I do agree with your point

 
I'd say 100 is too low. splitting always gets you more cash, but it also means a lot more patience and trips to the post office.

 
They are the genuine ones. They're complete with all the markings and what not. I saw a few Chinese copies when searching for a price, and they're definitely not the ones I have.

For example, the Chinese handguards don't have things like the CAA trademark on it and were roughly finished.
Trademarks don't always mean it's not a clone. I've got plenty of cloned magpul stuff with all the right logos. I know people do spend £150 on a handguard for a £100 gun but there's not too many of them about...

 
Trademarks don't always mean it's not a clone. I've got plenty of cloned magpul stuff with all the right logos. I know people do spend £150 on a handguard for a £100 gun but there's not too many of them about...
Ah it wasn't actually meant for this gun. The guy was selling his collection, but these were parts that were just left over an so included them.

I decided to take the stock and handguard down to an airsoft store and they also said they're the real ones - I tried selling them but they don't do that kind of stuff unfortunately.

 
Ah it wasn't actually meant for this gun. The guy was selling his collection, but these were parts that were just left over an so included them.

I decided to take the stock and handguard down to an airsoft store and they also said they're the real ones - I tried selling them but they don't do that kind of stuff unfortunately.
Fair play. It happens a lot though, I see loads of people wanting hundreds of pounds for an otherwise stock gun just because they've paid full whack for genuine Magpul or CAA furniture.

Maybe try some of the real steel shooting forums?

 
Fair play. It happens a lot though, I see loads of people wanting hundreds of pounds for an otherwise stock gun just because they've paid full whack for genuine Magpul or CAA furniture.

Maybe try some of the real steel shooting forums?
Nah I am not expecting to get the full price of them, but I also don't want them to be totally worthless. Will have a look about and see if there is any interest :) Thanks

 
I see you have listed it for £180 even though you paid £165 or less for it :blink: didnt realise being third hand increased the value

 
Last edited by a moderator:
Back
Top