The 'What have you just bought' Thread

[Qlimax]

Let me know how you get on with it mate, am wanting to buy that set up for my WE R5C

will do bud. Just waiting for some 6mm OD air line to come then will try it on my reg hopefully it will work on that

 

[kerby91]

Not bought but swapped for a new sidearm

Tokyo Marui g18c with a list of guarded upgrades as long as my arm....cant wait til it gets here.

Oh also got a crappy two tone revolver for free off a mate that I've stripped down ready to spray it black. Test fired it before breaking it down and boy does it kick lol, accuracy I dismal but it will serve well as a backup-backup lol

 

[kerby91]

The list of upgrades to the g18c

-Guarder steel sights

-Guarder up rated recoil spring

-Guarder up rated loading nozzle

-TB inner barrel

-Guarder steel fire selector

-AIP hammer assembly

-Guarder gen3 US lower frame

-Guarder ridged Glock trigger

-Guarder extended magazine release

-Nine ball gas router

Should be fun to use once its here. Gonna order a couple of 50rd mags off ebay too, nice way to spend £40 haha

 

[SeniorSpaz87]

Alrighty then, not really just bout, but bought in the last week. Hope you guys like reading long lists...

VSR 10 rail

Barrel mount 20mm weaver rail

Emerson LQE two point sling

Insulated carryall

ICU gun mirror system

30m black paracord

2x mini GoPro rail mounts

M4 hand guard cap

10x inert .30 06 rounds

Black rifle stock pouch

G&P/Star/Madbull M4A1 (thanks to BigAl)

6x midcap PMags (thanks to BigAl)

DBOYS 3 in 1 M203 UGL (thanks to Lozart)

2x ZCA 40mm gas grenades (thanks to Lozart)

2-6 x32 scope (thanks to rafal86)

3000 Blaster Devil .2g bbs

Lower face mesh mask

144a Maintenance gas

Coyote tan drop pouch

TM enhanced recoil spring for G17

And now my debit card has in the range of £0.36 left in it... But still got £60 cash, so I'm not broke yet

 

[PT247]

will do bud. Just waiting for some 6mm OD air line to come then will try it on my reg hopefully it will work on that

What reg are you using? On the M4s this requires pretty high psi, my reg only goes from 0-200psi which is why I blew out my pressure gauge the other day as my G5 needs higher than that too.

 

[Qlimax]

Tried my Redline but not enough puff in there so have to get one from Alyan themselves which is 0 - 500Psi. So I could use their reg on both my systems

 

[Ian_Gere]

I was going to leave my next gun purchase until after the upcoming Balshoy Bolshevik Bash, but then I decided to have a quick check on Bluestreak's site FPS limits to see what, if any, mods might be useful in fettling any of the guns I'm considering taking with me. Turns out that as well as support weapons deployed on bi/tripods firing full auto @450FPS MED 15m, they also allow BASRs and AEG sniper rifles which are supplied from the factory as semi-auto only to fire @550FPS with 30m MED... Gulp! That's going to make sniping against local counter-snipers a bit tricky. My next gun plan was going to be making a DMR from an RPK and fitting it with a full tacticool conversion, but with a deficit of upto 100FPS I just don't see a role for it during the Bash - so I was faced with a complete overhaul of Svetlana SVD, or sack range and just play as a rifleman

But I'm in really poor shape... even worse than at the end of summer when i had to hit the gym to be able to even carry an AEG for a few hours and I don't have the amount of meds needed anymore to be able to use them strategically to get me through a daily workout. Besides, what's the point of having credit cards if you don't occasionally spank their little pink perknesses :lol: So:

CM.052A CYMA RPK - £196.28 (420FPS OOTB)

airsoftpro.cz POM piston head w/ double O-ring - £8.95 (other double O-ring designs can produce +30FPS)

ACM aluminium air seal nozzle w/ O-ring - £1.30 (could be worth +10FPS & definite extra consistency)

D-Boys 1000rnds quad stack hicap mag - £3.47 (as backup to a drum mag will allow a lo-drag approach)

GFC Tactical tandem RPK mag pouch x4 - £2.12 each = £8.49 (actually mainly for PP-19 Bizon mags)

GFC Tactical double 40mm nade pouch - £5.06 (to replace my Soviet 1st aid pouch on my Splav rig)

Total: £223.56 inc Free Shipping from gunfire.pl​

​

Edit: so i'll just play the support role and make it my mission on the day to help my team mates get the actual hits by keeping the HATO forces cowering in cover, being the self absorbed, cowardly, corporate lick-spittles they are :lol:

 

[ForestFighter]

Been a while but...

PAYDAY!

Just picked myself up the basics to become a sort-of-1980s Soviet soldier.

- KLMK oversuit

- 5x MAG AK74 midcaps

- Chicom Chest Rig

By the way, Ian... Could you let me know how the quad stack mag is? I was interested in picking one up.

 

[ConnorDom]

[excuse my lazy 'i-I's, ipad doesn't autocorrect them with this keyboard and with technology I've (the effort in that shift key though) become quite lazy..]

So i work offshore, and if anybody else does I'm sure they'll agree that when you're bored and go online, it's very easy to spend money..

so, amazon cart, £210.50

-4000 .25g 'gunfire rockets' BBs

-a 1 to 2 point interchangeable sling

-bolle cobra safety goggles - anti mist - clear (we get similar tinted ones for work and they seem perfect!)

-viper belt with 7 various pouches

-protect protocol belt (thinking the viper might not quite fit, so this good quality one with a secure buckle)

-leg holster (2nd time lucky hopefully, only managed to fit my M9 barrel in the last one, that claimed to fit..)

-black baseball cap

-OD dump pouch

-'condor' 2x3 molle m4 mag pouch, with quick release tabs (nothing gets a guy shot like a 3 inch velcro tab..)

-'topoutdoor' tactical gloves (knuckle guard and what LOOKS LIKE semi-decent finger grip)

-black combats

-coiled lanyard (my -STILL 2 TONE ORANGE- M9 spent 3 days in the garden, searched for 2 hours, with 3 guys. still works!)

-khaki/black shemagh

-H&S tactical mesh goggles (i like that mesh cant fog, but we skirmish at night and I'm not sure about vision)

-Peradon aluminium 1 piece snooker case (not quite airsoft related. but we play snooker and get drunk in the basement before hitting the bunker, so it's kind of related..?)

so that's amazon.. it's also not official yet but my mate is picking me up a G&G CM16 Raider-L when he's in London!

so total cost, we'll round it up to £400, because I'll fill the fridge on skirmish day to return the favour!

 

[Ian_Gere]

By the way, Ian... Could you let me know how the quad stack mag is? I was interested in picking one up.

I've had 1 before: they are just about ok in use - like any other winding hi-cap, with all the same problems. Basically the only thing going for them is that they allow you to carry so much ammo without the massive extra length of an RPK type long banana mag. However the flange which holds them in place, the bit which you fit in first, is not very substantial. That's what killed the one i had before - went to do the rock'n'lock mag change as per usual and evidently didn't seat the forward part of the mag properly because when I rocked it, it just ripped the flange completely off. There is no way to repair it either as that bit is moulded as part of the whole body - even superglue is no good: it just comes off again after a couple of uses. But since i was ordering from gunfire.pl anyway, so could save on shipping, for £3.47 it's worth it as a back up, even if i get barely any use out of it before stupidity takes over again.

The 1st one i had needed the spring which holds the latch across the feed tube clipped by a couple of mm, because it was so stiff that BB's wouldn't feed. I intend to coat the inside of it with a layer of that very thin, 1mm, packing foam to prevent rattle too.

And having taken the decision to spank my Visa, I couldn't stop there...

SHS High Speed AEG Motor for AK / PTS ACR/ G36/ M14/AUG Airsoft Ver.3/ 7 Gearbox - £27.30 posted

20cm Length AK Scope Sight Mount for Airsoft Marui Cyma Cybergun AK SVD AEG GBBR - £25.00 posted (considerably cheaper than any of the other Zenit kit clones on offer and the only thing that will differentiate them will be the paint job - but i don't care, it'll be getting deliberately scuffed up and/or painted anyway).

 

[Sitting Duck]

+1 likey for da motor - I need to get some more too & replace the ferrite ones on some of mine

(great rof & improvement all round once deans & fet'd even on lower juice batteries)

 

[PT247]

Ummm, so much for letting my bank account recover for a few months....

UF PRO Striker XT trousers and combat shirt,

UF PRO Striker combat jacket,

UF PRO baseball cap,

(all in Slocam)

UF PRO elbow and knee armour,

MOLLE Vertical air tank pouch (olive drab),

Condor Tactical Ronin MOLLE chest rig (olive)

I really REALLY need to sell a motorbike lol

 

[Airsoft_Mr B]

 

[Ian_Gere]

+1 likey for da motor - I need to get some more too & replace the ferrite ones on some of mine

(great rof & improvement all round once deans & fet'd even on lower juice batteries)

Yeah, to bring my new RPK inline with my "armoury" I'll be swapping it to Deans and rewiring it to take Turnigy Nano Tech 11.1V LiPo's under the top cover, rather than in the stock where the battery fits OOTB and I have a Burst Wizard BW3 MOSFET lurking in my bits box which has a pre-cocking function, as well as the AB necessary for 11.1 volts.

My plan for the RPK in the fullness of time is to set it up with a high cycle rate, hence the POM double O-ring cylinder head I ordered with the RPK as opposed to the aluminium Magic Box design, but eventually I will DMR it using a mechanical semi-auto only lock off. I'll be keeping it as a high FPS support weapon for the Balshoy Bolshevik Bash though so, if I manage to sort out programming the BW3 in the time I have between receiving it and the Bash, I will tune the ROF down to a real world figure - apparently it sounds great with this MOSFET because it keeps the fast cycle rate and introduces a delay between, in effect, discrete semi-auto shots.

But my track record with programming BW MOSFET's isn't good, so this may all prove to be academic...

 

[Airsoft_Mr B]

5.11 Double Duty 1.5" TDU Belt

 

[Snakeeyes75]

Finished my VSR and also I had to buy the M249 para as it was such a great price!

 

[Bottledtorment]

As promised here's the photos of my clone JPC (really bad quality but has spurred me to buy a real one) at some point

and the Modular pack which definately needs modding to stop it catching on my belt

View attachment 14958

 

[SeniorSpaz87]

My w700 kitted out, nice btw snake, I went with woodland on the stock, not barrel, but to each his own. It's a uhc w700 with a TM VSR 10 rail, a ZOS 2-6x32AOE scope, with an Emerson two point sling, black cheek rest with pouch and elastic for 12 rounds, mine are inert 30 06 rounds that have been repressed, not hammered, making them look more realistic.

*Edit

Not quite sure why that scope pic keeps flipping... Oh well...

 

[mcduff1979]

Yeeeeeess, so comfy

who makes this it looks awesome?

 

[Mack]

who makes this it looks awesome?

Its a CRYE CPC, The price is awesome too h34r: