Gun picture thread

[Bwian_eh?]

I bought this off a mate yesterday, it's an old PPS. It wouldn't cycle Tanaka style SS6 shells without slam firing them, starting doing a conversion to APS shells. Then realised they're banned at everywhere I would want to take it, so ended up fettling it to use the SS6 shells again.
And then fitted the stock from a long deceased Maruzen M870.

 

[GothicGhost]

Upgraded my MWS to 14.5

 

[Hellfish]

 

[CamboL]

My CQB and Night Game Baby
TM NGRS MP5SD

Away from all the internal f*ckery have done to it, externally:

B&T Tri Rail
Surefire Clone
DBAL A2 (IR and Green Laser)
Obligatory EoTech

Have since tidied up the cable management

 

[Cooperman26]

Ignore the boxes behind..

I managed to find a silver Colt.. WE brand

(still looking for the Cybergun branded version but this will do for now)

Came a few days ago.

But today arrived some cream coloured checkered grips and some fancy screws from olde AliExpress. The grips were cheap as chips but the real deal as you get from any reputable UK Airsoft shop. Abit of work was needed to get them seated properly and the screws are sliiiiightly to wide so they protrude just a little. But. I think it looks rather smart!

 

[The_Lord_Poncho]

Ve

Ignore the boxes behind..

I managed to find a silver Colt.. WE brand

(still looking for the Cybergun branded version but this will do for now)

Came a few days ago.

But today arrived some cream coloured checkered grips and some fancy screws from olde AliExpress. The grips were cheap as chips but the real deal as you get from any reputable UK Airsoft shop. Abit of work was needed to get them seated properly and the screws are sliiiiightly to wide so they protrude just a little. But. I think it looks rather smart!

Click to shrink...

Very smart. I love white grips on a 1911- I have the same AliExpress ones on my E&C- just needed a little Dremel work at the inside tops and bottoms from memory to achieve a snug fit.

 

[Cannonouscrash]

I think my Stribog is ready for an outing.

Thanks @Krisz for the stock, I think it works really well.

 

[The_Lord_Poncho]

I think my Stribog is ready for an outing.

Thanks @Krisz for the stock, I think it works really well.

View attachment 11232

Click to shrink...

Did you leave the stock too close to the fire?

 

[aragoth]

New gun day!

Boomarms G17 gen 4

Full guarder steel version
- GLK-215 Guarder Steel CNC Slide for MARUI G17 Gen4 (Black)
- GLK-219 Guarder Steel CNC Outer Barrel for MARUI G17 Gen4 (Black)
- GLK-162 Guarder Enhanced Loading Nozzle for MARUI G17 Gen4
- GLK-209 Guarder Light Weight Nozzle Housing For MARUI G17 Gen4
- GLK-216 Guarder Steel Dummy Ejector for MARUI G17 Gen4
- GLK-169 Guarder Enhanced Valve Set for MARUI G17 Gen4
- GLK-172 Guarder Enhanced Piston Lid for MARUI G17 Gen4
- GLK-227 Guarder Standard Night Sight Set for MARUI G-Series
- GLK-207 Guarder Steel CNC Recoil Spring Guide for MARUI G17 Gen4
- GLK-218 Guarder 6.02 inner Barrel with Chamber Set
- GLK-268 Guarder Frame Complete Set For MARUI G17 Gen4 (U.S. Ver./Black)
- GLK-105 Guarder G-Series GBB Magazine Base (Standard/Black)
- GLK-177(A)BK Guarder Light weight type Aluminum Magazine x 1

 

[MasterGouken]

Expensive month for me:
vfc HK416A5 gbbr
TNT hop unit
Unicorn inner barrel
Clutch precision aluminium fake chamber
Waldo dynamics npas, winter recoil and hammer springs
Magpul CTR stock, handstop and moe grip
8 x V3 vmags
Z parts steel barrel nut
Plus a few accessories including a smokey wolf suppressor with tan manta cover (not pictured)

Just need an ngal, surefire m600 and switch and that'll do, for now