• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Ares Striker AS-01

Give the ASG 0.4g Whites a go. They seem as good as the dark coloured ones and a lot easier to track.

 
Hangtight said:
Give the ASG 0.4g Whites a go. They seem as good as the dark coloured ones and a lot easier to track.
Click to expand...
Normally I would of tried these but were out of stock when I went to order some, I will prob try them at some point in the future but happy with the performance of Geoffs and Proballs at the moment.

 
I've tinkered with mine and there's not ahuge amount to do really.

The barrel and bucking could be swapped out, but other than that they work well for the price.

My only niggle is the hop arm, it's a VSR type b looking one. I'd of rather it accepted AEG nubs or was a bit longer, might trim it off and make a flat nub.....Unless someone wants to 3D print them

 
As Hef said above really. I did take everything apart to clean, lube and check for as perfect airseal as I could get from the standard internals. The barrel was filthy but found that on a few guns that I've had from new, think its general dust and storage dirt but makes me wonder how many people go out with a barrel not performing at its best!

I guess if it ain't broke don't fix it! New spring was only needed to bring up the power.

 
Debating modelling up a replacement chamber which mimic's a V2 PDI (because i have one sitting in my spares to use for reference) to use W-Hold bucking / aeg inner barrel. Will need to get my printer back to working before I do any proto's though.

 
GiantKiwi said:
Debating modelling up a replacement chamber which mimic's a V2 PDI (because i have one sitting in my spares to use for reference) to use W-Hold bucking / aeg inner barrel. Will need to get my printer back to working before I do any proto's though.
Click to expand...
God no, PDI's stupid two prong chamber is a joke, also VSR style buckings are superior airseal to AEG ones. It would be like taking a step back.

A variety of 3D printed arms would be good though, the stock chamber is good and gives a great airseal. I just think the arm could be better :)

 
Brauster said:
As Hef said above really. I did take everything apart to clean, lube and check for as perfect airseal as I could get from the standard internals. The barrel was filthy but found that on a few guns that I've had from new, think its general dust and storage dirt but makes me wonder how many people go out with a barrel not performing at its best!

I guess if it ain't broke don't fix it! New spring was only needed to bring up the power.
Click to expand...
What spring did you go for?

 
I would like to know the VSR GPEC outer barrel is fit for Striker? Thanks!

 
I highly doubt it, but.....I actually just had a Gspec delivered today so I can have a look.

 
Hef Legend said:
What FPS did that get you?

The more I look at the trigger, the more unsure I am how long it'll last lol
Click to expand...
Around 495fps on 0.20g.

Trigger is better than some I have seen but time will tell.

 
GiantKiwi said:
Velocity out of heavier ammo, energy remains constant regardless.
Click to expand...
2 guns shooting .2's at 500fps may both read 2.34J, however you can take the same two guns, shorten the barrel in one while putting a bigger spring in to keep the fps on 500 with.2s and find that one will shoot a .4 at say 380 and the other at 340.

Usually the shorter one will be the one with the higher joule output. Good example is a 500fps VSR vs a 500fps VSR Gspec with both shoot out a .4 at a different FPS and Joule.

ignore me if I completely misunderstood you lol Long day at work.

 
Guys,

Im looking at potentially buying one of these just so I can have a change of pace every now and again. I've seen a lot of reviews on the web, mostly positive. However a lot of people seem to really bash it for the short stroke system and although I understand it im not really into doing much tech work or significant internal upgrades on stuff. So I was looking at getting this, throwing the max spring I can play at my field in it and going from there and if they release the gas system for it maybe get that.. but yeah. Any update on these in the long term? Are they worth a buy?

 
You must log in or register to reply here.

Similar threads

N
Upgraded Ares striker 3 bolt doesn't catch?
Replies
1
Views
550
Speedy Sloth
S
G
Tokyo marui m40a5 and maple leaf mlc 338 deluxe
Replies
3
Views
975
Impulse
Impulse
MSSNAFU
To Fix or Not to Fix a clone ASW338LM, That is the Question
Replies
2
Views
1K
MSSNAFU
MSSNAFU
Rickwales
TM vsr10 g-spec
Replies
3
Views
380
Rickwales
Rickwales
C
Nov SSG11
Replies
6
Views
1K
Impulse
Impulse
Back
Top