• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

Having previously fitted the RA-Tech NPAS, I swapped it out for a Jaeger Precision one today because the RA-Tech one is such a faff to adjust. The Jaeger one's definitely an improvement.

After briefly flirting with 1.4J after installation, I'm now at a much less spicy 1.05J. That'll do nicely.

 
Madhouse said:
Having previously fitted the RA-Tech NPAS, I swapped it out for a Jaeger Precision one today because the RA-Tech one is such a faff to adjust. The Jaeger one's definitely an improvement.

After briefly flirting with 1.4J after installation, I'm now at a much less spicy 1.05J. That'll do nicely.
Click to expand...


Good to know. I picked up three Jaeger ones a few weeks ago for my MWSs to replace the RA-Tech ones because they are just a complete faff

 
Hello MWS enthusiasts, new owner here for first foray into gas. Got myself an M4A1 on a good secondhand deal for a setup I’m going for but, unsurprisingly, already going down the rabbit hole…

I’d like to have the option of a 10.5” barrel for a CQBR build as well, seen various photos when Googling that suggest the outer barrel forward of the FSP can be unscrewed and a shorter extension added, despite trying to search the thread, not really coming up with anything so far.

I have a stock barrel, am I on the right track or do I need to source a complete 10.5” outer/get a modular barrel kit?

Thanks in advance…!

 
Davet said:
Hello MWS enthusiasts, new owner here for first foray into gas. Got myself an M4A1 on a good secondhand deal for a setup I’m going for but, unsurprisingly, already going down the rabbit hole…

I’d like to have the option of a 10.5” barrel for a CQBR build as well, seen various photos when Googling that suggest the outer barrel forward of the FSP can be unscrewed and a shorter extension added, despite trying to search the thread, not really coming up with anything so far.

I have a stock barrel, am I on the right track or do I need to source a complete 10.5” outer/get a modular barrel kit?

Thanks in advance…!
Click to expand...


I think you would need to get a 10.5" or a modular barrel. I don't think the 14" barrel has a section that can be unscrewed like you're saying. At least mine doesn't!

 
If you have the 14,5“ outer barrel, buy one 10,5 and install it. Now find someone who can cut, drill and tap your 14,5" outer barrel to create the extension like this: https://www.taiwangun.com/fr/canon-interne/external-barrel-for-m4-14-5-10-5-cyma

I did it on my PTW. It’s really nice to switch with both configurations.

I don’t know any brand that offers this barrel extension option with the triangle front sight but i don’t know everything either.

"Edit": look at this https://www.popularairsoft.com/news/angry-gun-outer-barrel-set-marui-m4-mws

 
Last edited by a moderator:
Can I get someone’s input..

I have a BCM bolt with a GM 3.5 nozzle and Npas, Waldo nozzle spring, dynamic Npas spring and it feels like it’s getting hung up more comparing it to my second  Tm bolt running the same set up just a G&P nozzle.

The BCM bolt releases the nozzle way later in the cycle motion.

would running the G&P nozzle be better long term using propane? 

 
Hi all, 

I've had my MWS for a little over a year now and for some reason having issues with the cold this weekend. It's about 10 degrees C and I could only get through about 5 shots before the bolt was REALLY sluggish.

It would chug through the last 30 (if it made it) and then be completely out.

I've not done the gas mod and I was using Nuprol 3.0, stock buffer, bolt, nozzle etc.

 
It’s just mag cool down mate. 
 

easiest thing is to get pocket hand warmers and put them in each mag pouch, keeps the mags over 18° easy and allows the gas to perform like it’s summer

 
Hi, me again about my G&P trigger box. This morning, after 2h of test with this trigger box and with an original one I found and solve my problem(s).

The problem for the full with the fire selector in semi position came from the trigger sear. To much material where the trigger sear is in contact with the fire selector so it can’t keep the hammer in position. With less material now it keep the hammer in position and I have semi in semi position and full ib full position.

Tested with original mags and GM mag without problem. Bolt carrier cycle is very good now.

 
Courtesy of airsoft competitions i have just become the proud owner of a mk18 mod 1. 

Brace for lots if questions. Its going to be my 1st gas rifle. Will try to resist just slapping a hpa converter on it.

 
Last edited by a moderator:
Decp369 said:
After some help…..

So I have a MWS URGI now & looking to put the 9.3” hand guard with the 10.3” inner. 
 

Will both parts just fit without any other parts or bits I’d have to change ? 
 

View attachment 146165

View attachment 146166
Click to expand...
I don't think you need any extra bits but I'd avoid 5ku OB, since the barrel is only fixed to the chamber by two grub screws. Spend like £10 extra to get a one-piece or threaded one would feels better

 
Where you guys getting TM mags? The guy on ebay selling mags from japan is out of stock also most of the sites are in same situation.

any suggestions? I got already 5 but need to increase to 8 for my DE N4

 
Ulmocuk said:
Where you guys getting TM mags? The guy on ebay selling mags from japan is out of stock also most of the sites are in same situation.

any suggestions? I got already 5 but need to increase to 8 for my DE N4
Click to expand...


Impulse101.jp seem to have stock

 
lokkers said:
Impulse101.jp seem to have stock
Click to expand...
Anything from asia comes with huge postage charge unless ordering big bulks with friends.
I think I will change my setup and add some GM pmag instead its goes around 65£ v3 version which is decent price my opnion.

 
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
715
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
634
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
361
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top