• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Happy New Year...well it was.

Dan Robinson

Members
Joined
Feb 13, 2022
Messages
1,140
Reaction score
1,454
Happy New year chaps and chappesses.  Got back from the land of the little people so feeling a bit zoned out.

Thought I'd have a look at my beloved Specna as it sounded awful last game day and wasn't feeding.  Was hoping it was the tappet spring again but no:

View attachment 122235

So that's Donald Ducked.

The two spare boxes i have dont quite fit for different reasons,  so off to Cage Airsoft it goes for dealing with it (wiring harness is fecked too).

Looking forward to a skirmish day, but Spec Ops isn't open until Feb, so maybe South Herts or AWA.

Hope everyone had a good break?

 
Last edited by a moderator:
Is that gearbox radiused? It's too late for that though. 

 
Is that gearbox radiused? It's too late for that though. 


It is as it came from Specna, and the older version of their box so I doubt it.  I suspect it is my fault by putting in a larger spring (although it was within joule limits when chrono' d); and/or a brief and brave morning with an 11.1 battery.   The last time it worked "properly", it was shooting like a laser.  But hindsight is 20-20 as they say.

I was trying different springs - an M120, and M110 (which I think was in it before) and the one it was shipped with.

@ak2m4 don't seem to have much in stock which is a shame - I wasn't planning on blowing £140 on a gearbox shell, so open to suggestions from the panel on what may be a more sensible option.

Patrolbase have the Orion gearbox in stock-ish so wondering if they have sorted it out since Luke panned it a few years ago, they also have the Delta Armory one.  Then there's the "Ultimate Gearbox Version 2", but I can't seen what it's made of.

 
I'd guess the stronger spring and 11.1 were too much for a standard shell.

You probably had a poor air seal so compensating with a heavier spring is not the way to go.

Personally I would never use an 11.1 in a standard gearbox but I hate high rof builds anyway. ?

 
This is why TM have always been so reliable, stock they don't aim to be the most powerful, nor the highest rate of fire, in return they virtually never self destruct, instead they just keep doing what their supposed to. 

There a lesson in there somewhere ?

 
I'd guess the stronger spring and 11.1 were too much for a standard shell.

You probably had a poor air seal


Spring, shimming and air seal were done at the same time as repairing it when the tappet spring went pop.  So a case of too much at once. ?

There a lesson in there somewhere ?


Indeed, once basic upgrades, then essential repairs are added up, there's a shiny new TM in there somewhere - but then it wouldn't be airsoft, and this is my first pew.  So there is a bit of sentimental value there too.  Thinking back, not much needed doing to the gun out of the box bar shimming, and air seal.  Once operational again, I might try the OEM spring again and see just how much the shim and seal would have done on it's own.

 
Last edited by a moderator:
I think I got the equivalent of a day's skirmish out of it once you factor in the swapping around the other pews.  

 
It's two years old now and skirmished in all weathers.  I suppose a little WD40 or GTwhatever wouldn't go amiss.

 
I guess it’s a little too far gone to just tape it back together ? 

all part of the fun of airsoft; something always needs replacing or repairing! 

 
The Ultimate Gearbox is a Lonex rebrand, very nice part but no QD spring sadly.  Orion probably best bet but quite high with the shipping from EU etc.  Delta Armoury looks good enough and decent price.  

 
I'm surprised m120 can do the Orion in, could the new cylinder is a bit bigger than original and it is tight on the shell?

Or the cylinder head? Or combination of both?

 
The Ultimate Gearbox is a Lonex rebrand, very nice part but no QD spring sadly.  Orion probably best bet but quite high with the shipping from EU etc.  Delta Armoury looks good enough and decent price.  


No QD kills that one off as an option really.  I take your website stock levels are accurate?



I was looking at that red gearbox...  Quite like the look of the Titan with "low ammo warning" etc.  But is the Orion a decent platform now?

I'm surprised m120 can do the Orion in,




The broken box is not the Orion, just a standard V2.

 
Last edited by a moderator:
No QD kills that one off as an option really.  I take your website stock levels are accurate?
Rough'ish, just waiting on lots of stuff to arrive but with Chinese holidays round the corner might be slow going.  So a good time to work on new website and do some product design stuff that I've been meaning to get around to.  Really want to stock some decent well priced qd gearbox shells but the age old problem is compatibility and availability.  Trying hard though to work with existing suppliers to make a few adjustments.   

 
Sorry to see that. The Orion boxes are notorious for it, even though they're radiused from the sweatshop.

I'm running a 2021 example as a DMR at 1.4J just to see how long it lasts.  I'm sure it's only a matter of time.

It's rather perverse that they come fitted with an M120 spring that's likely to wreck them sooner rather than later.

 
Sorry to see that. The Orion boxes are notorious for it, even though they're radiused from the sweatshop.

I'm running a 2021 example as a DMR at 1.4J just to see how long it lasts.  I'm sure it's only a matter of time.

It's rather perverse that they come fitted with an M120 spring that's likely to wreck them sooner rather than later.


Seems the new Orions are no better than my standard V2 then.  Still, would that red one be worth the £90 if only for the cylinder,  Titan and trigger?  Tye can be transplanted once again when the time comes?  Would only be running git at standard AEG limits. 

 
Last edited by a moderator:
Back
Top