• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

Gun picture thread

Jacob Wright said:
It's a Surefire Redi-Mag. Allows you to hold a spare magazine on the rifle next to the to the one in the magazine well. Saves having to draw a spare from a pouch, and on some AEGs they double up as battery containers.
Click to expand...
thanks, that was my first thought.

 
Ooohhh. Where are these hiding in the Internet? 

 
Last edited by a moderator:
I’ve been after one for a while. I tend to keep an eye out so if I see another one I’ll bare you in mind ??

 
I use mag couplers now; these are my gotos for both real ARs and airsoft: 

uhRNMcmLS4itLEQMtuza


 
So this one was a bit of a gamble. listed as boneyard on BBguns4less with no details of the issues. I had a few NGRS AK parts floating around so I bought it and when it arrived it was missing the fire selector lever that sits inside the receiver and is attached to the fire selector. The hop dial, which sets the hop, was snapped off and missing.

Luckily I has a spare selector lever and I replicated the dial from another of my NGRS AK's and 3D printed it and it works well.

It looks like this was a brand new, in the box, AEG that they robbed for parts - very happy with the result.

View attachment 109386

View attachment 109387

And I also picked up a Canik TP9 whcih fires differently from about 99% of other airsoft pistols. It's striker fired, not hammer fired, and I quite like it.

View attachment 109388

but me being me, I couldn't leave it alone as the extended mag release tended to dump the mag when holstered in my Warrior universal holster so off the the 3D printer again to make a 3mm thick extension to replace the standard 5mm version that comes with the pistol.

 
Had a broken tappet plate and since I was in there I fitted a NanoAAB mosfet. It's a Tokyo Marui M14 with a wooden stock and firing at 330 FPS on 0.2g. I'll be using it this weekend as I've got a woodland day. I'm still deciding if I want to S hop  it or not. The range on the M14, straight out the box, is pretty impressive so do I need to tinker with it?

View attachment 109473

 
mightyjebus said:
Had a broken tappet plate and since I was in there I fitted a NanoAAB mosfet. It's a Tokyo Marui M14 with a wooden stock and firing at 330 FPS on 0.2g. I'll be using it this weekend as I've got a woodland day. I'm still deciding if I want to S hop  it or not. The range on the M14, straight out the box, is pretty impressive so do I need to tinker with it?

View attachment 109473
Click to expand...
Nope -  if it works, don't feck with it... Nice piece too.

Eezer G

 
mightyjebus said:
Had a broken tappet plate and since I was in there I fitted a NanoAAB mosfet. It's a Tokyo Marui M14 with a wooden stock and firing at 330 FPS on 0.2g. I'll be using it this weekend as I've got a woodland day. I'm still deciding if I want to S hop  it or not. The range on the M14, straight out the box, is pretty impressive so do I need to tinker with it?

View attachment 109473
Click to expand...
Nah leave it be. 

 
Filling the void of no pewing for a few months (bloody work shifts) by tinkering with my AKs. 

Put my RPK back to wood stock and put a folding stock on my AK. Keeping the side folding reciever  because I know I'll want to put it back on an AK in the future. 

Next pewing will be first weekend of August at Battle Lakes. 

May have to say goodbye to the RPK within the year due to a possible move to London as a mature student. So I need to give it a good few run outs. 

View attachment 109874

 
You must log in or register to reply here.

Similar threads

andersson
G&G L85a2 upper receiver jumps out of alignment
Replies
1
Views
241
ButcherBill
ButcherBill
S
VFC BCM MCMR GBBR and VFC PRO FORCE Sig MCX
Replies
0
Views
493
StayOnTarget
S
Zarrin
Asian retailer Checkout w/ over 50% of RIF externals
Replies
5
Views
1K
Bnjemann
Bnjemann
Dogsbody100
Upgrading a Well MB 01
Replies
3
Views
646
Rogerborg
Rogerborg
sam_91
Hey All , new to this forums but not new to Airsoft
Replies
1
Views
927
ButcherBill
ButcherBill
Back
Top