• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

What have you made?

working on a TM MK46 recoil in need of some love. Knocked up a 5.56 link retainer for the magazine to keep the rounds attached to the mag (and cheaper than the £66 fake bullet set from TM). The recoil part that shakes the rounds had been damaged so I designed and printed a new one and one of the bipod feet was missing (let's not talk about TM's decision to use a magic pin system to hold the foot on instead of welding it). I've got a replacement bipod on the way so the foot design and print was just for fun and it does work.

View attachment 100564

View attachment 100565

View attachment 100566

View attachment 100567

View attachment 100568

 
Last edited by a moderator:
bought a KWA GBB Scorpion VZ61 for shits and giggles at UCAP vendetta on Sunday and after waving it about in the dark like a moron I decided it needed a torch and tracer adding. I found a file on thingiverse and modified it so that the folding stock could still fold and here it is.

View attachment 101152

View attachment 101153

View attachment 101154

 
Popped this up as a status and pretty quickly realised I never read them so it’s unlikely anyone else does, so I’m going to copy pasta the same text here as it seems like the most concentrated place on the forums for you creative 3D printing folks.

If anyone into the 3D printing thing could get in touch about designing/creating/printing me an insert for a 'suppressor' to pack out for a tracer that'd be lovely, I do have dimensions measured up. Should be just a fairly simple tube unless you want to get fancy. Obviously happy to pay for the service, TIA!

Edit: Update, part now sorted courtesy of the man below. Thanks for those who have messaged me.

 
Last edited by a moderator:
alxndrhll said:
Popped this up as a status and pretty quickly realised I never read them so it’s unlikely anyone else does, so I’m going to copy pasta the same text here as it seems like the most concentrated place on the forums for you creative 3D printing folks.

If anyone into the 3D printing thing could get in touch about designing/creating/printing me an insert for a 'suppressor' to pack out for a tracer that'd be lovely, I do have dimensions measured up. Should be just a fairly simple tube unless you want to get fancy. Obviously happy to pay for the service, TIA!
Click to expand...
PM me the details and I'll have a look

 
Recently got into 3d modeling and grabbed a printer. Doing some modeling on making a serbu super shorty shotgun but based on a springer tri shot. Made a couple of prototype grips. The fixed one needs slimming down quite a lot but works just fine even at only 20% infil for these prototypes. I was also working on a folding one but Ill need to revisit it at some point because its just not strong enough. Also working on a hk21 machine gun based on one of my g3s

View attachment 102237

View attachment 102238

View attachment 102239

 
Can’t be bothered to try and make a barrel clamp on RIS fit under the front sight so I trimmed a Polymer Magpul Mlok extended rail to suit ?

Clamps through the holes in the fore end and keep the light out the way. If my repro light had threaded holes I could lose the clamp and bolt it directly - might invest in some taps and try threading it.

View attachment 102608

View attachment 102609

 
Been working on a M41a/Thompson midcap insert for someone (I dont personally care for either gun but Im happy to help a fellow player), figured Id share it here.

image.png
image.png
image.png
image.png


IMG_7247.jpg


 
Not sure if it counts a "made" but after A LOT of sanding I've finally managed to get the ammomax P99 holster to actually accept the P99 and lock it in place

 
Cannonfodder said:
Not sure if it counts a "made" but after A LOT of sanding I've finally managed to get the ammomax P99 holster to actually accept the P99 and lock it in place
Click to expand...
Didn't try boiling water ? 

Usually works for me?

 
So Im finally remaking my hybrid mk23 after mine was stolen last year. Building pretty much the same gun but doing some modernization to it. One of those things is the replacement of the Novritsch optics rail and replica Trijicon SRO with a custom mount and a replica Aimpoint ACRO P-2. Only took two versions to get the finished project. I printed it vertically so the layer lines wouldn't cause any sheering breaks due to pressure put on the optic. Pics are of v1, while the screenshot is v2 - its currently printing. 

View attachment 103909View attachment 103911View attachment 103910

View attachment 103908

 
Been working on this rheinmetall lm vampir peq box as no one seems to make one in airsoft and its for my new KS-1 Build 

Currently in the phase 1 of testing sizes and diamentions and going to be fitting the guts of an LA5 inside it 

Last photo is the first attempt on my KAC

View attachment 103922

View attachment 103923

View attachment 103924

View attachment 103925

View attachment 103926

View attachment 103927

View attachment 103928

Also working on a sound distraction device, insert a particular "personal alarm" into my shell, press the button, throw it in a room and watch everyone wonder WTF is going on as you breach and shoot them all

View attachment 103929

View attachment 103930

View attachment 103931

View attachment 103932

 
Skills^
 

Do you do 3D design for a living!?

Your distraction device reminds me of the tactical rubber chickens we used to use at a CQB site ?

 
View attachment 103966

Spent a few days to find a solution and closest one was 200 pound wall unit which you can see it in shops so I said fuck it I will build my own. Ordered some pegboards from ikea and liberated some timber from my workplace.  I don't know how stable is I may die in my sleep when it falls apart. ?

 
Doing the lord work with that Rheinmetall vampir, wanted one since I saw that pic of craighead with one.

 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

A
Calling all that have a 3D printer, MOSQUITO Open Beta test!
Replies
12
Views
5K
Speedbird_666
Speedbird_666
sp00n
What have you just 3d printed (for airsoft)
22 23 24
Replies
471
Views
86K
MrTea
MrTea
Hef Legend
Snipermechanics SRS Guide
Replies
0
Views
7K
Hef Legend
Hef Legend
jeremythegenius
Mil-Tec Ghillie suit review
Replies
5
Views
5K
Happy
Happy
Back
Top