THE TM MWS thread

[slayerkitty]

yeah thats the problem im having, i really dont want to have to try and get one for TM ?

 

[scar527]

Alright guys, now bear with me. I promise I have a good reason for asking this.

Lets say I really enjoy the consistency of the MWS. Lets say I normally use a bolt gun at the skirmish for sniping. I really like the ergonomics of my MWS setup, and was curious if there was a way to install a different valve, or modify the rocket valve to allow for single shot mode. 

Yes, one shot at a time, pulling the charging handle back to cycle a new round each time. It's heresy I know,  but could it be done? I feel like it could be done relatively easily, but I am not sure of how one would do that.

When you are done laughing/scratching your head at what I just asked, let me know your thoughts

**I understand that this would eliminate the recoil function of the MWS- that is fine for what I would be using it for so long as I could revert it back to its normal function**

 

[C-Diddy]

yeah thats the problem im having, i really dont want to have to try and get one for TM ?

Impulse101 is my standard go to for MWS parts. May be worth dropping them a line?

 

[AlphaBear]

Alright guys, now bear with me. I promise I have a good reason for asking this.

Lets say I really enjoy the consistency of the MWS. Lets say I normally use a bolt gun at the skirmish for sniping. I really like the ergonomics of my MWS setup, and was curious if there was a way to install a different valve, or modify the rocket valve to allow for single shot mode. 

Yes, one shot at a time, pulling the charging handle back to cycle a new round each time. It's heresy I know,  but could it be done? I feel like it could be done relatively easily, but I am not sure of how one would do that.

When you are done laughing/scratching your head at what I just asked, let me know your thoughts

**I understand that this would eliminate the recoil function of the MWS- that is fine for what I would be using it for so long as I could revert it back to its normal function**

I've had as laugh... I've scratched my head... I even scratched an itch that I shouldn't have touched.... I see what you're saying but I believe the design doesn't warrant that behaviour.. I mean yes you cock it back so-to-speak when you chamber the first round and then let it do it's magic..... Interesting thought though.....

 

[SBoardley]

Alright guys, now bear with me. I promise I have a good reason for asking this.

Lets say I really enjoy the consistency of the MWS. Lets say I normally use a bolt gun at the skirmish for sniping. I really like the ergonomics of my MWS setup, and was curious if there was a way to install a different valve, or modify the rocket valve to allow for single shot mode. 

Yes, one shot at a time, pulling the charging handle back to cycle a new round each time. It's heresy I know,  but could it be done? I feel like it could be done relatively easily, but I am not sure of how one would do that.

When you are done laughing/scratching your head at what I just asked, let me know your thoughts

**I understand that this would eliminate the recoil function of the MWS- that is fine for what I would be using it for so long as I could revert it back to its normal function**

Or you could just try finding an old springer from like twenty years ago and you’d be golden…..

 

[scar527]

Or you could just try finding an old springer from like twenty years ago and you’d be golden…..

I have a springer, for context I used to run Tanakas but never really enjoyed the consistency. I'm super impressed with the MWS, I honestly just wish TM would make a bolt gun that uses the same mags or something similar, they would sell like hot cakes.

 

[C-Diddy]

Alright guys, now bear with me. I promise I have a good reason for asking this.

Lets say I really enjoy the consistency of the MWS. Lets say I normally use a bolt gun at the skirmish for sniping. I really like the ergonomics of my MWS setup, and was curious if there was a way to install a different valve, or modify the rocket valve to allow for single shot mode. 

Yes, one shot at a time, pulling the charging handle back to cycle a new round each time. It's heresy I know,  but could it be done? I feel like it could be done relatively easily, but I am not sure of how one would do that.

When you are done laughing/scratching your head at what I just asked, let me know your thoughts

**I understand that this would eliminate the recoil function of the MWS- that is fine for what I would be using it for so long as I could revert it back to its normal function**

View attachment 85668

 

[scar527]

View attachment 85668

Aright Alright I'll let this one be put to bed.

No MWS was harmed in the discussion of the abominations mentioned above ?

 

[AnderVentura]

Hi!

My original nozzle broke some time ago. I then instaled the one that comes with the gen 1 drop in kit from Angry Gun, but changing the valve for an adjustable one from G&P. Played 2 games and all OK. 

Yesterday I was having inconsistency issues. Checking the valve I discovered it was rotating freely inside the nozzle.

I want to get rid of Angry Gun. What nozzle do you recomend? OEM isn't available

 

[Argyld]

Alright guys, now bear with me. I promise I have a good reason for asking this.

Lets say I really enjoy the consistency of the MWS. Lets say I normally use a bolt gun at the skirmish for sniping. I really like the ergonomics of my MWS setup, and was curious if there was a way to install a different valve, or modify the rocket valve to allow for single shot mode. 

Yes, one shot at a time, pulling the charging handle back to cycle a new round each time. It's heresy I know,  but could it be done? I feel like it could be done relatively easily, but I am not sure of how one would do that.

When you are done laughing/scratching your head at what I just asked, let me know your thoughts

**I understand that this would eliminate the recoil function of the MWS- that is fine for what I would be using it for so long as I could revert it back to its normal function**

How dare you!!!!

Now that being said, interesting idea.

The Bolt/Nozzle must be sent back to disengage from the mag/gas flow.

You could replace the buffer-spring by a weak one, strong enough so that it slows the bolt enough to not damage the bolt or buffer tube, but weak enough not send the bolt (fully) forward. So that you need to manually cycle the bolt to fully engage it.

It should work, but the risk of damaging bolt/buffer tube seems too high to me. I suppose TM installed a spring which is just about right, so probably not enough margin to install a weaker spring without damaging your system.

And the bolt catch on an empty mag, might also stop working, but not sure on this one.

Or somehow change the bolt catch that it engages every time, not just on an empty mag. Wouldn't know how though.

 

[AlphaBear]

How dare you!!!!

Now that being said, interesting idea.

The Bolt/Nozzle must be sent back to disengage from the mag/gas flow.

You could replace the buffer-spring by a weak one, strong enough so that it slows the bolt enough to not damage the bolt or buffer tube, but weak enough not send the bolt (fully) forward. So that you need to manually cycle the bolt to fully engage it.

It should work, but the risk of damaging bolt/buffer tube seems too high to me. I suppose TM installed a spring which is just about right, so probably not enough margin to install a weaker spring without damaging your system.

And the bolt catch on an empty mag, might also stop working, but not sure on this one.

Or somehow change the bolt catch that it engages every time, not just on an empty mag. Wouldn't know how though.

Don’t encourage him lol ? 

 

[Argyld]

Don’t encourage him lol ? 

Let him realize his errors and crouch back begging for forgiveness ...

 

[scar527]

Let him realize his errors and crouch back begging for forgiveness ...

It was just an idea! Haha more just wishful thinking that TM would make a gas bolt gun, they have a great base and it would be super easy.

 

[AndyLS]

Long time reader first time poster. Does anyone know any UK stockists that have any MWS in stock currently 

 

[Khyber]

Long time reader first time poster. Does anyone know any UK stockists that have any MWS in stock currently 

Think you may have just missed a restock. A couple of places got them in a month or so back that I could find. Managed to grab one but they sold out in a few days. Patrol base is where I got mine, on sale too. They only had around 12 in stock I think. Managed to secure 6 extra mags too. But I had been waiting a couple of months. Best bet is to add a restock notification on the page. Will get an email as soon as they have more.

 

[demandt]

Has anyone tried the Volante steel bolt carrier yet?

 

[C-Diddy]

Long time reader first time poster. Does anyone know any UK stockists that have any MWS in stock currently 

Fire Support get regular restocks. Set up a stock alert and go for the deal with three additional mags ?

 

[kimoy]

I recently bought an EMG strike MWS replica,
I have problems with feeding, the Bolt carrier group, it gets stuck, apparently the pellet does not reach the ramp.

It only works ok with G&P MWS charger, which is a bit higher, but with Marui M4 MWS chargers, it gets stuck.

The BB, it doesn't fit well into the chamber ramp, it presses up on the Nozzle, which is gradually damaged by the upper edge of the chamber.

in videos they use Marui and G&P chargers and both work.
Will it be a specific problem of poor manufacturing of the chamber?

View attachment 86007



View attachment 86008

View attachment 86009

View attachment 86010

View attachment 86011

 

[DustinR]

Hey Guys, 
I am a new owner of the MWS (I want do make an DMR build)
Could someone help me ?

I would like to know which upgrades I should definitely do - as well as which hopup configuration works best in the MWS and co.

Since I do not want to create new pages and repeat conversations that may have taken place on page 200.
I would be happy about a private message

Thanks !
 

 

[Wild Weasel]

Hey Guys, 
I am a new owner of the MWS (I want do make an DMR build)
Could someone help me ?

I would like to know which upgrades I should definitely do - as well as which hopup configuration works best in the MWS and co.

Since I do not want to create new pages and repeat conversations that may have taken place on page 200.
I would be happy about a private message

Thanks !
 

Have a look at Ollie talks Airsoft on you tube!