THE TM MWS thread

[scar527]

The Tan Modify buckings even years back when the QC was better, they still didn’t live long.

The Maple MR works well but needs modification to fit the MWS hop unit.

So I tried this with my laylax barrel and it gave abysmal results- even after adjusting the side fin to fit in the hop unit. Do you have to use with one of their barrels?

 

[Davegolf]

I used both the stock TM barrel 50d and a Prommy MWS barrel 60d, the latter in a DMR setup @ 430fps.

I generally do not like Maple products, but was impressed with the MR + SuperNub combo, but it wouldn’t surprise me if you get ‘lemon’ Maple buckings.

Did you check for any moulding flaws and give a good fairy liquid scrub?

 

[rj1986]

False alarm, she was just dirty and dry

Sounds like my ex

 

[marine]

I used both the stock TM barrel 50d and a Prommy MWS barrel 60d, the latter in a DMR setup @ 430fps.

I generally do not like Maple products, but was impressed with the MR + SuperNub combo, but it wouldn’t surprise me if you get ‘lemon’ Maple buckings.

Did you check for any moulding flaws and give a good fairy liquid scrub?

Supernub ....SiX Gbrass ?

 

[rj1986]

What else is in a MWS DMR?
Barrel, hop rubber + nub and...?

An NPAS and a modified selector?

 

[Davegolf]

^Yes and HSB, potentially buffer spring too if recoil speed is too high and Rhop if you super flush.

 

[scar527]

I used both the stock TM barrel 50d and a Prommy MWS barrel 60d, the latter in a DMR setup @ 430fps.

I generally do not like Maple products, but was impressed with the MR + SuperNub combo, but it wouldn’t surprise me if you get ‘lemon’ Maple buckings.

Did you check for any moulding flaws and give a good fairy liquid scrub?

Do you use the metal C clip?

I'll double check it, but it seemed fine when I inspected it. Cheap enough to justify another order for a 60D as I am using mine in a DMR.

EDIT: Removed the C clip, gave it a shot- much more consistent. I still get the odd flier, but that may just be because I haven't bedded it in yet.

 

[rj1986]

Has anyone seen any reviews of the G&P SPR kit for the MWS?

 

[Captain Darling]

Since people are talking about upgrades, I have to report that my hao industries bolt that I had set up for ultralight use actually works worse that the stock bolt in the cold. Like way worse ?

Now I'm back to my only upgrades being Daves nub and HSB, a 150% spring, and a laylax 370mm inner barrel and the thing just works even in the cold. Occasionally I'll use a different rocket valve for DMR purposes but the more stock the better it would seem.

I am curious, how many people rate the tan modify bucking? I've heard they have QC issues as of late, and I'm going to run the stock marui until I can't anymore but its good to have options in the bin for when the time comes.

I’m still using the Modify X blue bucking, and getting good results with DN (Daves Nub), Laylax 370/6.03, black NPAS, black gas, standard TM mags. 

Hi !

1. 0.32g Specna Arms EDGE bio

2. Yes

3. 10 shots per mag

I see that VORSK gas it´s very unstable but you can see that max and min are better with T8 gas route

10 shots per mag?  That’s terrible, I’m getting about 100.

 

[marine]

I’m still using the Modify X blue bucking, and getting good results with DN (Daves Nub), Laylax 370/6.03, black NPAS, black gas, standard TM mags. 

10 shots per mag?  That’s terrible, I’m getting about 100.

I'm sorry, I meant to take 10 shots per magazine in the test

 

[Captain Darling]

I'm sorry, I meant to take 10 shots per magazine in the test

I'm still not clear on what you mean?

 

[SSPKali]

I'm still not clear on what you mean?

He fired 10 shots from the magazine to give an average reading. Not that he only managed 10 shots from a fill of gas!

 

[MAX DICKER]

So I bought the 9.5" Madbull Daniel Defense rail for my mws. After tightening the barrel nut, I've found there's a very small amount of wobble on the outer barrel. I've ordered the Madbull barrel nut washer set.... is this right? Seems strange that the rail didn't come with some anyway.

 

[C-Diddy]

So I bought the 9.5" Madbull Daniel Defense rail for my mws. After tightening the barrel nut, I've found there's a very small amount of wobble on the outer barrel. I've ordered the Madbull barrel nut washer set.... is this right? Seems strange that the rail didn't come with some anyway.

I think that, or any barrel shim set should solve the issue. 

I have a G&P MK18 rail that I haven't fitted yet, but the bloke I bought it from was kind enough to include a few shims. 

 

[MAX DICKER]

Thanks for the confirmation,  I hate tinkering with my pews and have no confidence in my abilities lol

 

[C-Diddy]

I'm right there with you. Reasonably comfortable on the MWS but no way will I touch my NGRS ?

 

[airfish]

Hey, do your rifles have movement between reveivers in parallel line? Mine was stiff at the beginning but now upper r. moves a bit against lower from left to right at the end (where back td pin is). Idk what caused that. Is it normal wear after time? (i'm talking about movement from left to right, not axial which i heard is normal after time)

 

[AlphaBear]

Hey, do your rifles have movement between reveivers in parallel line? Mine was stiff at the beginning but now upper r. moves a bit against lower from left to right at the end (where back td pin is). Idk what caused that. Is it normal wear after time? (i'm talking about movement from left to right, not axial which i heard is normal after time)

It’s normal. They all do it.. Font to back. And side to side. Don’t stress. 

 

[airfish]

Thanks for reply. Its a relief what you say ? However i think it won't be difficult to fix it, just glue a layer of black soda can on this  nodule with hole that the pin goes through and it should be fine

 

[SSPKali]

Thanks for reply. Its a relief what you say ? However i think it won't be difficult to fix it, just glue a layer of black soda can on this  nodule with hole that the pin goes through and it should be fine

I put 4 layers of tiny gaffer tape squares on the bottom of the pin nub on the upper receiver. No side to side or up and down play. There is a slim gap between receivers but not noticeable from 3ft.