• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

100%. I use a Slingster with my MWS and a padded BFG VCAS on my NGRS. No way I'm trusting over a grands worth of pew to a £10 sling. Use good hardware with slings too. 

First time out tomorrow with the MWS eh @MAX DICKER? Your face is going to hurt from all the grinning you'll be doing after each trigger pull ? 

 
C-Diddy said:
First time out tomorrow with the MWS eh @MAX DICKER? Your face is going to hurt from all the grinning you'll be doing after each trigger pull ? 
Click to expand...
Nah, had it about 12 Months completely stock, only recently I've gone a bit bananas accessorising it.

Always puts a big grin on my face though. 2 of my friends have bought MWS's after trying mine lol

 
They have that effect! And just when you think you've done accessorising, you see someone else's build and think ? "that'd look good on mine"

 
Khyber said:
@C-Diddy its not yet ordered. Got the cash just awaiting my UKARA number now. I want the look of the MK18 as I don't like the idea of not being able to remove the front triangle sight, I did consider getting the cqbr and adding the mk18 Daniel Defense rail but then figured it's just unnecessary extra cost. But then the MK18 seems like they don't want you getting the rail off. I will get a barrel nut tool same time I get the SixG nub. I am getting 3 extra mags at the same time as the rif to get me going. Thanks for advice on the slings. Not sure if I want 1 or 2 point yet. May have to ask to borrow at the field to get a feel for both variations. 
Click to expand...
Definitely a 2 point, so versatile and easy to drive the gun.

If you haven’t already the the Ronin Tactics vids are great.

Ive always been a fan of ‘high ready’ and the 2 point makes it even better than when I used to run single point.

 
Since people are talking about upgrades, I have to report that my hao industries bolt that I had set up for ultralight use actually works worse that the stock bolt in the cold. Like way worse ?

Now I'm back to my only upgrades being Daves nub and HSB, a 150% spring, and a laylax 370mm inner barrel and the thing just works even in the cold. Occasionally I'll use a different rocket valve for DMR purposes but the more stock the better it would seem.

I am curious, how many people rate the tan modify bucking? I've heard they have QC issues as of late, and I'm going to run the stock marui until I can't anymore but its good to have options in the bin for when the time comes.

 
The Tan Modify buckings even years back when the QC was better, they still didn’t live long.

The Maple MR works well but needs modification to fit the MWS hop unit.

 
You will find that there have been a lot of discussions about gas routers somewhere in this thread with varying degrees of success. Nevertheless your results are interesting and it's always good to see how new gases like Vorsk perform. A few questions from my side and no doubt you'll get a lot more from others too..

1. What bb weight and brand were you using?

2. Have you done the green gas mod with your mags?

3. How many shots did you fire until the mags ran out of gas. I assume the Marui router performed better in this respect.

 
AlphaBear said:
You will find that there have been a lot of discussions about gas routers somewhere in this thread with varying degrees of success. Nevertheless your results are interesting and it's always good to see how new gases like Vorsk perform. A few questions from my side and no doubt you'll get a lot more from others too..

1. What bb weight and brand were you using?

2. Have you done the green gas mod with your mags?

3. How many shots did you fire until the mags ran out of gas. I assume the Marui router performed better in this respect.
Click to expand...


Hi !

1. 0.32g Specna Arms EDGE bio

2. Yes

3. 10 shots per mag

I see that VORSK gas it´s very unstable but you can see that max and min are better with T8 gas route

 
Actually the min max difference is the same 17-18 fps ;)

Only thing to watchout for with some gas routes is that they do not force the nozzle up.

 
Davegolf said:
Actually the min max difference is the same 17-18 fps ;)

Only thing to watchout for with some gas routes is that they do not force the nozzle up.
Click to expand...
Ollie talks Airsoft encountered that very problem with the Guarder ones:



 
4 hours ago, Panama said:

Ollie talks Airsoft encountered that very problem with the Guarder ones:

Click to expand...


yes, good note.

When installing it I make sure that it is not forced and that the bbs push guide does not rub excessively. It is more in the T8 nozzle I had to sand the guide because it already rubbed with the TM OEM gas routes

 
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
716
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
634
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
361
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top