• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

SSPKali said:
The G&P adjustable stop has 3 different holes for the thin cross screw so it adjusts how far forward the valve sits and thus the power.
 

I was getting 180fps / 260fps / 290fps on green gas and 0.30g BBs at 18degC on the low/mid/high settings IIRC. Stock TM bolt/nozzle/etc
Click to expand...
Amazing thank you, I’ll take the bolt apart hopefully tonight and investigate further, do you have any pics of the adjustable stop at all? If not it’s no dramas just would be good to have something for reference ? don’t worry if not though, wouldn’t want you to go out your way to take any ?

 
TadsJ2 said:
Probably not on the current topic, but how long does the gas route seal hold? mine is starting to wear down and i can see some damage on it...  is it normal?

View attachment 77592

is there anything to be done apart from changing it? is my G&P nozzle causing this?

Also should i order RIW T8 mag gaskets (cant find TM's anywhere in stock) for replacement ?
Click to expand...


How many rounds are we looking at on those gas routes?

It does look like the G&P nozzle rides lower, but in a wierd way, do you have a pic of the G&P nozzle / gas route mating face?

I would stick to TM gas routes, put a request in with Impulse101 and they will order in.

 
Joe142 said:
Amazing thank you, I’ll take the bolt apart hopefully tonight and investigate further, do you have any pics of the adjustable stop at all? If not it’s no dramas just would be good to have something for reference ? don’t worry if not though, wouldn’t want you to go out your way to take any ?
Click to expand...
The three prongs and 3 different screw holes (can see 2 in pic, at different levels) are a dead give away.

https://www.fire-support.co.uk/product/gp-marui-mws-gbb-adjustable-piston-valve

View attachment 77595

 
Davegolf said:
How many rounds are we looking at on those gas routes?

It does look like the G&P nozzle rides lower, but in a wierd way, do you have a pic of the G&P nozzle / gas route mating face?

I would stick to TM gas routes, put a request in with Impulse101 and they will order in.
Click to expand...
>How many rounds - hard to say... lets say a 1000each

Wrote a request to Impulse101...
Well i measured the TM og nozzle and G&P nozzle's 
this part View attachment 77597

Seems that G&P nozzle is a little bit more protruding -> so i've sanded it a little
I will try to make a photo, but its sanded already

View attachment 77606

Sorry if this is not the angles you wanted to see, should i try to photo it from a different angle ?

View attachment 77607

 
Last edited by a moderator:
Thats what i thought, its the BB loader thats damaging the gas routes on the G&P nozzle, sand it back so it matches the height of the TM nozzle

 
Joe142 said:
I’ve not heard very brilliant things about angry gun but haven’t tried any of their parts personally, I’ve just been told by a few to stay clear, personally I love the g&p bolt carrier, not had any problems with it yet but as I say it does increase FPS quite considerably in my case so may need an npas to make it site legal 

Awesome thank you buddy I’ll take apart the g&p and take a closer look at the parts inside, I don’t believe it has a valve stopper but I’ll take a look, can the valve stopper be adjusted to do the same job as an Npas? 
Click to expand...
Thanks! I am looking for a original tm bolt. Best way for quick change?

 
Jan Mulder said:
Is the angry gun bolt carrier group any good? I’ve searched everywere forma stock tm bolt.
Click to expand...
I have one for lack of better option (John Wick fde no.) (eagle 6 has been  out for over a year now) looks a bit flimsier and had a fold up hammer reset block but is quite light and improves gas usage and accuracy believe it or not!

Point to note if you are not getting a complete bolt and just the BCG, some sealing buffers will not work in it I recommend using a dp enhanced sealing buffer (green one) as the TM and some of the angry gun ones drag like mad in there. Fire support were very kind in sending me a selection of which I went with a DP enhanced.

 
reddotscope7 said:
Hello everybody, I'm looking to make an integrally suppressed build, something like this https://www.silencershop.com/sig-sur300-suppressed-upper.html,(I don't have that kind of budget of course), with a 9 inch outer barrel, suppressor and handguard with the ideal sizes but I do not know where to start, any ideas? Also Thank you!
Click to expand...
I would start with selecting a hand guard and measuring the internal diameter and then working from there as that will dictate the suppressor diameter. You will also need to check the length of the hand guard vs barrel and see what overlap you need.

 
Last edited by a moderator:
reddotscope7 said:
Hello everybody, I'm looking to make an integrally suppressed build, something like this https://www.silencershop.com/sig-sur300-suppressed-upper.html,(I don't have that kind of budget of course), with a 9 inch outer barrel, suppressor and handguard with the ideal sizes but I do not know where to start, any ideas? Also Thank you!
Click to expand...
SSPKali pretty much answered this already. I can say that if you want to use a tracer unit, this kind of build can be really effective as you can tuck the tracer into the handguard and avoid that extra 3-4 inches of length. I’ve done that with my Angrygun mcmr and acetech blaster. View attachment 77820

View attachment 77819

 
Hey guys, hope your all well, a quick question to all those who have bought the MK18 gbbr.

Are you guys finding the dreaded barrel nut easy using the correct tool? Or is it still a struggle? I have been holding off on this for a while but think it’s about time I finally made the upgrades, I have the heat gun, I just need to buy the tool whilst they’re still in stock.
I mean in the eagle6 video the guy used the long barrel tool and a heat gun, and he still struggled. Now this guy techs on people’s guns everyday. How are you guys finding the job?

Also is 6.00mm barrel diameter too tight? Don’t know wether to go 6.03 or 6.00, obviously would prefer 6.00 if it doesn’t cause issues.

 
Reap said:
Hey guys, hope your all well, a quick question to all those who have bought the MK18 gbbr.

Are you guys finding the dreaded barrel nut easy using the correct tool? Or is it still a struggle? I have been holding off on this for a while but think it’s about time I finally made the upgrades, I have the heat gun, I just need to buy the tool whilst they’re still in stock.
I mean in the eagle6 video the guy used the long barrel tool and a heat gun, and he still struggled. Now this guy techs on people’s guns everyday. How are you guys finding the job?

Also is 6.00mm barrel diameter too tight? Don’t know wether to go 6.03 or 6.00, obviously would prefer 6.00 if it doesn’t cause issues.
Click to expand...
I've got the tool so will attempt it when i get the nub and hop rubber.

Saw a post from Sam at KOA, and he said use a lot of heat, and hold the rail & body while torquing so that you dont snap the gun (worse nightmare)

 
Reap said:
Hey guys, hope your all well, a quick question to all those who have bought the MK18 gbbr.

Are you guys finding the dreaded barrel nut easy using the correct tool? Or is it still a struggle? I have been holding off on this for a while but think it’s about time I finally made the upgrades, I have the heat gun, I just need to buy the tool whilst they’re still in stock.
I mean in the eagle6 video the guy used the long barrel tool and a heat gun, and he still struggled. Now this guy techs on people’s guns everyday. How are you guys finding the job?

Also is 6.00mm barrel diameter too tight? Don’t know wether to go 6.03 or 6.00, obviously would prefer 6.00 if it doesn’t cause issues.
Click to expand...
me and my friend use 6.00 with BLS BBs. We have not had any problems in the 2 years we have been using them. But be aware that it can raise the joule a lot, depending on the length.

 
Hey guys,
I've told you before to try and use Begadi VSR5 60degrees buckings, well, I am sorry, but I have to take my words back.
They make a good airseal but its made from not good enough rubber for gbbr's on 15+ oC temperature it gets too swollen up and then it starts acting weird especially on full auto mag dumps.

IT worked well when i was playing in the summer ( 25/30 oC), but yesterday my gun started acting on me and I found out that the reason for misfires/doublefeeds and bad full auto mag dumps - was the swollen bucking.
TLDR: best to avoid Begadi VSR5 60degrees for MWS/MTR systems. 

This bucking only went through ~500 rounds
 

View attachment 78095

View attachment 78096

View attachment 78097

 
Last edited by a moderator:
I’m looking to buy a MWS and trying to decide wether or not buy a stock gun and start buying parts or a G&P Strike Industries MWS (which looks like what I want).

This one at airsoft tiger 111hk

Does anyone have any experience of this version of the MWS? I can’t seem to find any reviews or anything. Wondering if it’s just externals or also internal upgrades in it?

thanks MWS legends!

 
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
715
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
634
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
361
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top