What have you made?

[Spartan09]

does this count?

 i just made a new thread for the charlton discussion to continue in, without clogging up this channel any more

  =P

edit:
apologies everyone, that was my poor attempt at humor late at night while half asleep

 

[HuttArmouries]

A bit of a ressurection project here. I bought this star m14 ebr about 3 years ago because it is a lovely chunk of c&c aluminium.  It uses a proprietary gearbox and though I managed to get a new shell I soon realised that I couldent get the switch. So it sat and gathered dust for a long time. Recently I picked up a cyma m14 gearbox and a dremel and set to work. Unfortunately since the m14 gearbox has a sideways motor the current stock wont fit. Ill be making a layered plywood target shooting style stock instead. It will also be a good test run for the sks project I have planned in future. 

still working out how best to attach it as the bracket currently stops the motor from seating fully. Im happy to be finally making progress on this gun and It should be done soon.  The main gearbox shell fits very tightly but ive found I had to remove the selector mech to get it to work so this is now a semi auto only gun.  

Parts I still need to source:
some sort of bracket to bolt the stock to
new charging handle as the old one shattered
lots of little bolts

View attachment 68332

View attachment 68333

 

[PopRocket123]

Been working on a little something in my spare time recently. M-LOK rails for the WE SCAR MK20 SSR. If I had the dimensions I could make the longer side rails for the VFC version. I'm also going to make a shorter bottom rail to fit the SCAR H/L.

View attachment 68689

View attachment 68690

 

[Guest]

I made a discontinued spring for the KWA Vector (the one at the front is mine)

Once it was heat-treated, and the tips trimmed, it worked perfectly ??

View attachment 69551

 

[witchcraft58a]

The idea is mine, the execution I can take no credit for.  I've been working with Seb at double tap designs, that man is a 3D design genius!

Essentially, I run the APS CO2 mags in Glock builds, the ones with the hex screw brass bottom caps. 

I didn't like the design and lack of aftermarket mag bases on the original, this changes the mag base to be essentially like a standard TM.  

The CO2 brass end cap sits in the hole, you slide it on, then screw it in place with a hex wrench through a (smaller) hole in the bottom of the mag base.  A new bottom spring guide was needed too...

Final design is done, they're off to get printed in MJF by Protolabs. 

View attachment 69554

 

[Piman]

The idea is mine, the execution I can take no credit for.  I've been working with Seb at double tap designs, that man is a 3D design genius!

Essentially, I run the APS CO2 mags in Glock builds, the ones with the hex screw brass bottom caps. 

I didn't like the design and lack of aftermarket mag bases on the original, this changes the mag base to be essentially like a standard TM.  

The CO2 brass end cap sits in the hole, you slide it on, then screw it in place with a hex wrench through a (smaller) hole in the bottom of the mag base.  A new bottom spring guide was needed too...

Final design is done, they're off to get printed in MJF by Protolabs. 

That looks very nice. Look forward to seeing in in action once you get the prints back.

 

[Guest]

I finished a GHK AK has drum mag for a friend of mine, not straightforward at all

View attachment 69637

 

[EvilMonkee]

I finished a GHK AK has drum mag for a friend of mine, not straightforward at all

View attachment 69637

Dude, I would be seriously interested in one of these but in a normal AK drum mag format if you could squeeze it into one of those?

 

[Guest]

Dude, I would be seriously interested in one of these but in a normal AK drum mag format if you could squeeze it into one of those?

Sorry man, I’m not building another, it was a massive pita.

Im pretty sure you can’t fit the AW internals inside a normal AK drum, they look too thin to me??‍

 

[SeniorSpaz87]

A sneak peak of things to come. What ever could it be? ?

View attachment 69973

 

[Piman]

Thought I would join in a show a couple of things I have designed and made.

Lens protector:

View attachment 69976

Fixed stock:

View attachment 69978

James

 

[SeniorSpaz87]

View attachment 69976

Damn that lens protector is clear. I need 7 haha

 

[Misery]

haha id order a few!!

 

[Piman]

The bit I hate is cutting the Lexan.

View attachment 70208

 

[Piman]

A few other items I have made, some mag pulls for some PTS and vector mags.

View attachment 70229

View attachment 70230

View attachment 70231

James

 

[Piman]

Another one....

This time a simple mock silencer/suppressor. This has some internal profiling which hopefully you can make out in the CAD image.

View attachment 70269

View attachment 70270

View attachment 70271

James

 

[Guest]

I built a green gas drum mag conversion for my buddies GHK AK

View attachment 70272

 

[Piman]

This weekends build. Inspired by the Helix Suppressor.

View attachment 70296

James

 

[PopRocket123]

Torch and suppressor mount for TM USP-C

View attachment 70365

View attachment 70366

 

[Piman]

Torch and suppressor mount for TM USP-C

View attachment 70365

View attachment 70366

Looking good. Watch your suppressor alignment. It doesn't take much to have BBs shattering on the end of it if it is even a few degrees or mm out.