OK I just don’t see how a bit of wear on a toy is a problem, anyway, I made the ambi selector out of a real steel piece on my MWS so dunno how better is GP or other toy manufacturer. BTW I did that only because it was cheaper to do it using a real steel part than buying a (overpriced) toy part.
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
Oh I like that any walk thoughts on it?
scale of 1/10 how hard is it
Good tip thanks
is it a whole bolt and nozzle too or just the BCG
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
You're welcome...Plus they make three colours....... there's a youtube video somewhere showing a G&P chap showing off all three 'colours'... I mean it's not like a PTW cylinder where the colour designates the power of the cylinder. I guess you can just bling up the MWS as you see fit (black, silver and hell yeah GOLD baby lol)
Dumb question, I can buy this whole thing and just drop it in, no assembly/other bits needed?
I haven't been airlsofting in ages and don't have a chrono. So I am going to see how predator ultra gas handles in my local CQB in Newbury (after lockdown) I am sure the lower TM sock FPS will be fine but it is tempting to get this bolt straight away ad just run heavier bbs instead of an npas. I don' know maybe is kind of a dick move as its gonna sting
View attachment 68162
Last edited by a moderator:
There are 2 ways:
1. milling the real steel complete ambi selector (I was close but not close enough so it was not working properly on SAFE)
2. Using only the right hand side switch and fitting it to the Marui one sided selector. This one is easy, you just need dremel and threading tool. You can find a picture of it posted 1 or 2 pages back.
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
No no don't do that.... you'll be over the joules limit with the G&P bolt and be frog marched off the site... well the gun will be banned... The G&P bolt carrier group is a drop in module... It's also not the only one around... my advice is to stick with the Marui bolt.. you really don't need the G&P bolt carrier group. The stock Marui bolt is absolutely fine. Just get a SIXG brass nub and a High Speed buffer. The brass nub will allow you to lift heavier ammo. You can also change the hop rubber to a modify tan rubber for better lifting....
Yeah have been considering the XISG brass nub, but deffo feel like I should just play with it stock for a bit. I will look into the high speed buffer. That just for RoF? and UAC I assume.
Also on the FPS your .3s come under 350 which is my sight limit but I suppose with weather and variations could be a risk. Plus the joule creep on a .3 at 350 is probably unfair.
Yeah I have seen the UAC lightweight bolt was but was a bit meh. The g&p power increase looks good for longer ranges
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Remember site limits are usually based on 350fps for 0.2's or the joule equivalent... so based on my figures the G&P bolt is running way too hot.. Incidentally I had to buy a separate G&P NPAS just to dial down the power... however I haven't installed it as yet....
Ah I see haven't been in so long couldn't remember if the limit was based on what you were running or .2s. Makes sense
Damn this SixG stuff looks impressive. Deffo considering the nub and maybe the high speed buffer too. Seems optimal for semi only running but a slight pain on full auto. Full auto is not ideal for GBB with 35 rounds anyway haha
My whole play style is gonna change I can feel it.
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Well put it like this, at £50 per mag playing on full auto means you need lots of mags to get through a game without having to faff around reloading in the field so that can be almost the same cost as the rifle or as you say you adapt your play style accordingly to the GBBR...
G
Guest
Guest
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Wash your mouth out with a bottle of whiskey young man! The thought of a drum mag on a MWS ?????
Hmm... I already have 3 hpa drums and 2 hpa hi caps for my other gbbrs. But that kills the realism. Unless it’s hpa mag well made to accept aeg mags. Hmm
G
Guest
Guest
That could be done, one company did make them for WE GBB M4’s, no reason why it couldn’t be done for the MWS.Unless it’s hpa mag well made to accept aeg mags. Hmm
Im working on one for the KWA Vector lol
Last edited:
Please no one HPA an MWS hahaHmm... I already have 3 hpa drums and 2 hpa hi caps for my other gbbrs. But that kills the realism. Unless it’s hpa mag well made to accept aeg mags. Hmm
AlphaBear
Members
- Feb 4, 2020
- 1,471
- 489
Last edited by a moderator:
G
Guest
Guest
So I just found out that this is a thing: https://www.highpressureairsoft.co.uk/store/p755/TM_MWS_M4_Mag_Adapter.html
If this is what I think it is, it will look completely disgusting when actually in the gun... But I'm tempted to buy it to find out just how bad it looks.. You know... For science?
edit: I wonder how this would look if you used an EPM-1 short. Yes, your gun will be kinda tall but you'll also get 170 round midcaps!
If this is what I think it is, it will look completely disgusting when actually in the gun... But I'm tempted to buy it to find out just how bad it looks.. You know... For science?
edit: I wonder how this would look if you used an EPM-1 short. Yes, your gun will be kinda tall but you'll also get 170 round midcaps!
Last edited by a moderator:
That was alyanairsoft, but he’s no longer selling them (moved on to one of airsoft manufacturers). There a guy in Russia though, who’s continuing his work:
https://facebook.com/KuzminSolutions/
Similar threads
