• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

AlphaBear said:
On a bb loading note, I’ve just got a Marui XL speed loader come in today. It’s still kinda tough loading the mags. That spring is one tough mother that’s for sure. Is that what people are generally using to load their mags? 
Click to expand...
Yep, I have a TM M4 and pistol speed loaders and they fill the mags fine, you just get huge thumb muscles ??

 
AlphaBear said:
Weather is saying 14c for Sunday. Damn that’s cold! Guess autumn is finally upon us. Abbey ultra predator gas should be fine I assume?

On a bb loading note, I’ve just got a Marui XL speed loader come in today. It’s still kinda tough loading the mags. That spring is one tough mother that’s for sure. Is that what people are generally using to load their mags? 
Click to expand...
Thanks for the advice guys, I think I’ll leave the mags alone for now until I find it becomes a real problem. I currently run 3 mags might get a 4th but 3 seems to suit my play style
 

Alpha bear I have a speed loader with a pistol adaptor and it works great, I find it easier to tilt I up every so slightly and hold the top down against the adaptor with a spare finger 

 
marine said:
Hi , 

I was problem with o-ring union middle mag .. use PTFE to repair . 

If you have dudes to PMAG , I did a lot of test to better performance
Click to expand...
Yes that O-ring is a piece of sheet....

But after 16 hours its still keeps in the 11g propane !

I will drop on the scale again few days later.

View attachment 62818

 
Guys can you get a co2 mag for this gun? (and would it be okay on a stock weapon with no mods)

links please if there is any...

cheers

 
P4radox said:
PMag update 2.0

Just solved the leakage problem!

I need a few more days to make sure its reliable ...

Probably they not gave proper attention for screw in....

View attachment 62804

View attachment 62805
Click to expand...
I had the same problem. Sneaky leaks. Greased all o-rings. Still leaky. Found this screw and lubed it - so far all fine. 
 

how was it to reassemble the upper and lower part? Looks like a pain 

 
Hey, 

did anyone try the G&P roller bolt end? It’s quite expensive for a wheeled bolt end ... but all rifles with it give off such a satisfying sound.

Also - G&P has a buffertube with the selling point of holes for exhausting air / gases. Could someone explain to me how this would be beneficial or whether it’s just a gimmick? 

View attachment 62838

View attachment 62839

 
Hypokondrikern said:
Hey, 

did anyone try the G&P roller bolt end? It’s quite expensive for a wheeled bolt end ... but all rifles with it give off such a satisfying sound.

Also - G&P has a buffertube with the selling point of holes for exhausting air / gases. Could someone explain to me how this would be beneficial or whether it’s just a gimmick? 

View attachment 62838

View attachment 62839
Click to expand...
Haven’t tried it, what is it designed to do and how does it change the noise? 

 
Hypokondrikern said:
I had the same problem. Sneaky leaks. Greased all o-rings. Still leaky. Found this screw and lubed it - so far all fine. 
 

how was it to reassemble the upper and lower part? Looks like a pain 
Click to expand...
Yeah..the reassamble is not pleasant but not difficult as it looks like...so the screw engage to the overhanging rod ,just need to find the good angle.

Pmag update 2.5 :

(2nd Day)still keeps!

View attachment 62846

 
Last edited by a moderator:
JSwan said:
Haven’t tried it, what is it designed to do and how does it change the noise? 
Click to expand...
It is supposed to give a smoother operation of the bolt and seem to work as intended. Look at my previous post about their complete kit for the MWS. The sound is incredible.  Yet ... the holes are mysterious to me...

P4radox said:
Yeah..the reassamble is not pleasant but not difficult as it looks like...so the screw engage to the overhanging rod ,just need to find the good angle.

Pmag update 2.5 :

(2nd Day)still keeps!

View attachment 62846
Click to expand...
crossing my fingers. Thanks for sharing! 

 
When you see a lot of mws being sold....,
you can be sure there is a crisis!

???????

 
Hop adjustment question guys. When looking at the hop through the mag well with the barrel pointing to the left  to increase the hop you turn the wheel in the opposite direction ie towards the right towards the stock end yeah ? 

 

 
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
715
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
634
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
361
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top