-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
I tried my best to align it this time and checked the arm for freedom of movement as I tightened the nut. Seems to be free to move right now, fingers crossed it won’t tighten again once many rounds are fired through it
The_Mixed_One
Members
- Apr 30, 2020
- 13
- 2
Can somebody recomend and new hop up? Should i go for the laylax hop up arm or the angry gun hop up house with the solid hop up arm? Or should i go for something different?
Cyberlawyer
Members
- Jan 1, 2020
- 340
- 79
Standard hop with the brass nub seems to be the consensus choice. Having tried a few I haven’t had anything that performs better.
The_Mixed_One
Members
- Apr 30, 2020
- 13
- 2
I have contacted him, but they are not responding
i really want to get my hands on one of those brass nubsJust give him time, it's totally worth it. ?I have contacted him, but they are not responding
So guy I got a few new parts for my bday.
A magpul B.A.D lever and enhanced trigger guard.
It was very time consuming getting these real steel parts to fit and work as they should. But totally worth it. ?
I also got a pdi raven barrel, now I know that people like them I've had a 7" in my hicapa for years but I must say this one is poor at best the bore quality is shocking and I would recommend staying away from them.
Also I some how snapped my disconnector and got it jammed in the Sears so had to strip the trigger down and remove it. Turns out that my rifle will operate with it broken just doesn't engage the full auto sear so it's locked to semi...
Just a quick little update on my build.
Hope your all doing well and staying safe. ?
Cyberlawyer
Members
- Jan 1, 2020
- 340
- 79
If you are super impatient then this is a reasonable interim stand in for a couple of quid. The brass one is better though so I’d still swap it out eventually.
https://www.amazon.co.uk/Airsoft-Pro-Stability-H-Nub-Softair/dp/B07SQFBK66/ref=mp_s_a_1_3?dchild=1&keywords=hop+nub&qid=1589243676&sr=8-3
https://www.amazon.co.uk/Airsoft-Pro-Stability-H-Nub-Softair/dp/B07SQFBK66/ref=mp_s_a_1_3?dchild=1&keywords=hop+nub&qid=1589243676&sr=8-3
Hi guys,
I am running into an issue where my mws mags aren’t charging properly with propane bottles using Airsoft innovation adaptor. Basically, the flow of gas stops quite quickly and the magazine can not fire many rounds. Yet, the same mag can be filled with my green gas bottle no problem. Gas flow is constant, and with a full charge I can shoot about 3 and half mag. I am wondering if anyone else ran into this issue?
I am running into an issue where my mws mags aren’t charging properly with propane bottles using Airsoft innovation adaptor. Basically, the flow of gas stops quite quickly and the magazine can not fire many rounds. Yet, the same mag can be filled with my green gas bottle no problem. Gas flow is constant, and with a full charge I can shoot about 3 and half mag. I am wondering if anyone else ran into this issue?
The_Mixed_One
Members
- Apr 30, 2020
- 13
- 2
already got a new modify tan at home ??AI and Madbull propane adaptors failed to work on my MWS mags (with or without the silent fill mod) so I gave up. Now I look out for deals on Abbey gas and stock up on that
SixG responded to me about the buffer spring spacer, think there were issues with the mail system
Aww sucks to hear about the adaptors. I used this adaptor in the past and it works but now it doesn’t, guess I have to use green gas only for this gun lol... kinda expensive compared to propane ?AI and Madbull propane adaptors failed to work on my MWS mags (with or without the silent fill mod) so I gave up. Now I look out for deals on Abbey gas and stock up on that
SixG responded to me about the buffer spring spacer, think there were issues with the mail system
Excited to get this in my MWS, shame it will be totally invisible! Great to see constant improvements being made ?
View attachment 57324
View attachment 57324
The Laylax hop unit is very very nice due to the way the nub can only move up and down.
Shoots lasers in mine with an Autobot 50.
The_Mixed_One
Members
- Apr 30, 2020
- 13
- 2
Hypokondrikern
Members
- Oct 15, 2019
- 163
- 36
Wild Weasel
Members
- Sep 24, 2019
- 190
- 56
View attachment 57364
I hope this is not teaching you to suck eggs but when you fill have you tried pressing that little bit harder and only fill in 1-2 second stab's. I do about 10-15 stab's per mag and if you weigh your mag before and after using a cheap eBay scale you can confirm it's filled right, for example mine weigh 473 grams gassed up with no bb's and green gas modded and 499 grams gassed,bombed up and magpul fitted. If you do that before a skirmish you know you can get away with one or two 'dodgy' fills and that you have 35 rounds on board i.e no guess work.
Hope this doesn't sound too daft but it's how I got it to work well for me.
Yep, I feel you, i'd got to the point where I was about to sack it too. I had tried two different a.i. adapters, two madbull copies etc and in the end it was the bottle, I solved it by buying either the Coleman type or rothenberger plumbers propane - I was still fairly fed up as i'd bought a refill kit and a refillable Coleman type bottle along with £40 of calor's finest. But once I'd binned that notion off she runs like a champ now.
I hope this is not teaching you to suck eggs but when you fill have you tried pressing that little bit harder and only fill in 1-2 second stab's. I do about 10-15 stab's per mag and if you weigh your mag before and after using a cheap eBay scale you can confirm it's filled right, for example mine weigh 473 grams gassed up with no bb's and green gas modded and 499 grams gassed,bombed up and magpul fitted. If you do that before a skirmish you know you can get away with one or two 'dodgy' fills and that you have 35 rounds on board i.e no guess work.
Hope this doesn't sound too daft but it's how I got it to work well for me.
It goes behind the buffer spring at the back of the buffer tube and creates extra spring tension for quicker semi auto shots, all while not eliminating any travel of the working parts themselves. The buffer can still pass through it.
This newer design is said to further improve the plastic buffers longevity. I have been very fortunate and one is being sent to me courtesy of Dave from SixG. I received the previous version makes it a little more snappier, it was no slouch to begin with lol!
Hey guys,
The piston, more specifically the nozzle on the piston, seems to have taken a hit (possible double feed) and dented the front edge of the nozzle just enough to cause it to occasionally not seat properly. Looking to replace it. Is it best to stick with an oem TM part or is there an equivalent alternative? Looking to fit an NPAS at the same time as this is on my DMR.
Thanks for the help in advance
The piston, more specifically the nozzle on the piston, seems to have taken a hit (possible double feed) and dented the front edge of the nozzle just enough to cause it to occasionally not seat properly. Looking to replace it. Is it best to stick with an oem TM part or is there an equivalent alternative? Looking to fit an NPAS at the same time as this is on my DMR.
Thanks for the help in advance
Last edited by a moderator:
Similar threads
