• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

THE TM MWS thread

Hey, does anyone know the contact for the six g supernub on here, I've been after one for a bit but I've had no reply.

Cheers

 
Hi, I'm getting a bit concerned about the reliability of my Angry gun MPA nozzle I've noticed my FPS consistently dropping and after adjusting it the screw is very loose that adjusts the nozzle. Has anybody tried putting a spot of weak loctite on the screw after removing it or is it not recommended - I'm running Coleman propane on a standard gun.

Can anybody advise who has one of these nozzles.

Cheers

 
Last edited by a moderator:
What parts of the bolt carrier group do I need to lube (and with what?)?

My Angry Gun complete MPA nozzle+bolt carrier isn't cycling all the way any more even after lubing the G&P bolt rollers with Superlube and putting silicon oil on the bits of the nozzle where Wolf's pictures on the first page indicate. It's not feeding in BBs properly, and it doesn't want to lock the bolt back.

Also, is there any maintenance that I need to do on my mags?

 
the3rdlegion said:
What parts of the bolt carrier group do I need to lube (and with what?)?

My Angry Gun complete MPA nozzle+bolt carrier isn't cycling all the way any more even after lubing the G&P bolt rollers with Superlube and putting silicon oil on the bits of the nozzle where Wolf's pictures on the first page indicate. It's not feeding in BBs properly, and it doesn't want to lock the bolt back.

Also, is there any maintenance that I need to do on my mags?
Click to expand...


I lube the entire bolt carrier group (and every other moving part on my MWS) with Wurth dry chain lube, as recommended on the first page of this thread. It's easy to apply, relatively cheap/easy to buy and seems to work great. I imagine any other PTFE (Teflon) spray would work equally as well.

Can't comment on the cycling problem with the Angry Gun nozzle/carrier set. I use an Angry Gun High Speed bolt carrier myself and that works a treat. But that's not very useful to know in this situation, sorry!

As for mag maintenance, there's nothing specific that I'm aware of, other than the usual good practice of keeping some gas in the mags between skirmishes. General rule seems to be if they're not leaking, leave them alone. I asked a similar question about long-term storage of MWS mags, which you can read here if you're interested.

 
You can strip the magazines down and check the o rings and clean the follower and spring. I don’t do it every skirmish, unless it’s really muddy, usually every 6 months is more than enough.
 

Otherwise a general wipe down and storing them with a squirt of green gas is all I do after most skirmishes.

 
I'm getting ready for another round of modifications (still can't find a cheap QD mount, so gonna have to get a £40 one ?) and came across this tool.

Anyone used it? Is it worth it, or can you do everything with normal tools easily enough?

 
An AR wrench is really worth having when working on the MWS. Make sure you get a good one the cheep ones will break.

 
Last edited by a moderator:
Wild Weasel said:
Hey, does anyone know the contact for the six g supernub on here, I've been after one for a bit but I've had no reply.

Cheers
Click to expand...
So, looks like it's going to be an omega nub then.

Wild Weasel said:
Hi, I'm getting a bit concerned about the reliability of my Angry gun MPA nozzle I've noticed my FPS consistently dropping and after adjusting it the screw is very loose that adjusts the nozzle. Has anybody tried putting a spot of weak loctite on the screw after removing it or is it not recommended - I'm running Coleman propane on a standard gun.

Can anybody advise who has one of these nozzles.

Cheers
Click to expand...
So, I'll just give that a go and let you guys know how it turns out, just in case somebody else buys one then.

Cheers lads

 
Last edited by a moderator:
Thought I'd jump in and say hi on this one. Had one of the early MWS's from Fire Support back in 2015. That's been and gone and now running the MTR16 with a crazy jet barrel, Tan Modify rubber and Laylax hop arm.  Short build also coming soon! 

 
Hypnosis said:
Thought I'd jump in and say hi on this one. Had one of the early MWS's from Fire Support back in 2015. That's been and gone and now running the MTR16 with a crazy jet barrel, Tan Modify rubber and Laylax hop arm.  Short build also coming soon! 
Click to expand...


CRAAAAAAAAIIIGGG!!!!!!!

 
I want to get a short barrel for the MWS compatible with a suppressor-tracer, but there are zillions of options at Fire-Support/Patrolbase/Amazon/et al. Can anyone can roughly point me towards one worth getting?

Also, anyone bought at Eagle6.co.uk? They seem to have a lot of TM compatible stuff, and it's almost too convenient to be true.

 
The Commander said:
I want to get a short barrel for the MWS compatible with a suppressor-tracer, but there are zillions of options at Fire-Support/Patrolbase/Amazon/et al. Can anyone can roughly point me towards one worth getting?

Also, anyone bought at Eagle6.co.uk? They seem to have a lot of TM compatible stuff, and it's almost too convenient to be true.
Click to expand...
Yep

used Eagle6 loads of times. Brilliant company.  Thoroughly recommend them!

 
The Commander said:
I want to get a short barrel for the MWS compatible with a suppressor-tracer, but there are zillions of options at Fire-Support/Patrolbase/Amazon/et al. Can anyone can roughly point me towards one worth getting?

Also, anyone bought at Eagle6.co.uk? They seem to have a lot of TM compatible stuff, and it's almost too convenient to be true.
Click to expand...
Anything 14mm CCW will work, just depends what rail you are running - if it is longer than the barrel then you will have to get a fairly skinny silencer to fit inside it

 
Looking to make the step up from a TM hk416 delta EBB to a mws and wondering where everyone gets there mk18 kits from? 

 
You must log in or register to reply here.

Similar threads

Rechard
Which M4 gas mag is better? VFC or MWS?
Replies
6
Views
1K
ProfHappyCat
ProfHappyCat
Angelvill3
Guns modify mws magazine issue
Replies
2
Views
716
Angelvill3
Angelvill3
Cr0-Magnon
MWS GBBR for Plinking?
Replies
5
Views
634
BigStew
B
aragoth
Custom m733 MWS
Replies
3
Views
362
ButcherBill
ButcherBill
Impulse
G&G m700 knock arm and plunger set issues
Replies
6
Views
1K
Impulse
Impulse
Back
Top