Uncle Pauly
Members
- Aug 3, 2019
- 208
- 33
Been told that Tiger 111hk also have them in stock, but I'm going to leave my order with Echigoya and wait until the 19th rather than cancel and re-order... I'm impatient, but not that impatient ?
-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
Been told that Tiger 111hk also have them in stock, but I'm going to leave my order with Echigoya and wait until the 19th rather than cancel and re-order... I'm impatient, but not that impatient ?
Uncle Pauly
Members
- Aug 3, 2019
- 208
- 33
Big thanks for the heads-up! ?
I've just cancelled my order with Echigoya and bought from Fire Support instead... so that's a beer I owe you should we ever meet in person (or other beverage of your choosing).
48 in stock when I purchased, now down to 42 (not all of those are mine!), so get 'em while they're hot.
M
Marine
Guest
Hey guys somebody has compare stock rubber vs kmrh55 ??
I'm tested ML autobot, Modify , ML decepticon and still I think that stock rubber os better but... Now I have that dude
I'm tested ML autobot, Modify , ML decepticon and still I think that stock rubber os better but... Now I have that dude
Restvitamin
Members
- Aug 9, 2019
- 1
- 0
Hi guys follow mws user from New Zealand just getting into doing a DMR build but I'm unsure about what strength of spring I should put in with my uac lightweight bolt, I had an issue where the nozzle got destroyed and just dont want it to happen again, I only have a 500 fps limit on my local fields and we dont measure joules so no worries on that part I've read all 70 pages and I'm pretty much gonna go with the tan bucking and hopefully a brass nub if it's possible to be delivered here. Thanks in advance for any advice.
View attachment 48408
View attachment 48409
View attachment 48408
View attachment 48409
Last edited by a moderator:
Hello ! I have a serious problem . I have a mtr16 with cerakote finish . So far so good , i have a thing of my own , i like to paint all of my replica in camo style . There is a thing with my mtr16 , right after the paint is dryed , it cames all out on a certain area ( the magazine catch/relese area) , i've repeated 5 time the process ( everytime acting with gloves , and cleaned that specific area ) but it seems endless . What can i do otherwise that remove all the paint to be all cerakote again !? There some special paint for cerakote or not!? So far i've used krylon , puff dino . Help pls
View attachment 48463
View attachment 48464
View attachment 48463
View attachment 48464
Cipher-032
Members
- Feb 26, 2011
- 285
- 76
Might be worth stripping it all off, and then using a fine wet and dry sand paper, or scotch brite to give the surface a "Key" so the paint can properly adhere.
I think i am geting nutts , i am starting removing all , there are some area where the paint is not coming off so easy , i am done with lower body
View attachment 48476
Last edited by a moderator:
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
It's stays on 'fairly' well if properly degreased with brake cleaner or 2k thinners.
Ive used Krylon and Humbrol on Cerakote, it should only come off when scratched and not in big flakes.
Make sure to do a dust coat and let it fully Gas out, then make sure your subsequent coats are thin and with a good 20mins between coats.
Ive used Krylon and Humbrol on Cerakote, it should only come off when scratched and not in big flakes.
Make sure to do a dust coat and let it fully Gas out, then make sure your subsequent coats are thin and with a good 20mins between coats.
Not relating directly to the gun, more set up.
I have the warrior falcon, which is an excellent chest rig, but 3 times my mags jumped out the double stack pouch when 1 was in there
So hive mind. Not wanting to lose expensive mws magazines, what's the best double mag insert out there that isn't too expensive?
I have the warrior falcon, which is an excellent chest rig, but 3 times my mags jumped out the double stack pouch when 1 was in there
So hive mind. Not wanting to lose expensive mws magazines, what's the best double mag insert out there that isn't too expensive?
On another note https://www.ebay.co.uk/itm/Laylax-Satellite-Electric-Quick-Charge-BB-Loader-179161/362716840607?pageci=3fffe3b3-a838-4039-a715-381626bf1d43&epid=1182122235
Anyone successfully used the laylax battery speedloader? Comes with an mws adapter
Anyone successfully used the laylax battery speedloader? Comes with an mws adapter
DopeYourScope
Members
- May 29, 2018
- 263
- 88
I had the exact same issue yesterday a mag of mine dropped out and only when we gave up looking my mate saw the magpul on the floor. I’ve ordered TMC pouch inserts but they haven’t turned up yet.
Last edited by a moderator:
I use the Esstac kywi pouches, and they never miss a beat.
Used the CQBR all day yesterday at The Gaol and the only issue I had with it was one double feed, my own fault, overloaded the magazine, and ended up spending 5 minutes clearing white shit out of my chamber.
7 mags is perfect, 3 up front, 2 on my right side, 1 on my belt and 1 in the gun. I get paranoid though, and wonder if I should get spares... you know, just in case...
Used the CQBR all day yesterday at The Gaol and the only issue I had with it was one double feed, my own fault, overloaded the magazine, and ended up spending 5 minutes clearing white shit out of my chamber.
7 mags is perfect, 3 up front, 2 on my right side, 1 on my belt and 1 in the gun. I get paranoid though, and wonder if I should get spares... you know, just in case...
FreeFrag.UK
AF-UK patch owner
- Feb 16, 2018
- 615
- 106
Just out of curiosity what are people's views on the MWS and it's viability for milsim events?
Can anyone offer any general advice or insight on running one for such events?
Can anyone offer any general advice or insight on running one for such events?
Uncle Pauly
Members
- Aug 3, 2019
- 208
- 33
I'm no expert on this (I'm sure others will chime in with good advice), but I'd suggest contacting the supplier to request a return / replacement / refund if the magazines are malfunctioning. Otherwise any attempt to fix them may invalidate the warranty.
Out of interest, where did you purchase them from?
from rainbow 8. refunding them will be my last resort as not a lot shops have them in stock
Similar threads
