• Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.

    The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here

    If you have any issues please post about them in the Forum Feedback thread: Go Here

The 'What have you just bought' Thread

Just swapped this for my ares honey badger

the red paint will be removed to return it to its former stealthy black although it needs a bit of  tlc, missing grub screws and some hop tweaks but will soon be a cqb monster

If anyone has a spare LCT folding stock pin I would be interested 

View attachment 46700

 
paradoxum said:
Good idea, I've got bikes and have used bike helmets obviously but eg the one I have now, the lens on it is pretty thick, cut/file/sand down the edges and it should bend enough and fix in? Can you post a pic of the inside please? Also love the colours and kill counts.

What about pinlock inserts? https://www.racevisors.co.uk/category/pinlock-inserts I've actually got a yellow one for my bike helmet and it has great anti-fogging on it. I'm going for a kinda republic commando look but not sure how a blue visor will look.

https://www.thevisorshop.com/en/LS2-FF399-Visor/m-22725.aspx

Looking at them and the mask it seems like the visor on the mask might be too tall - what are the dimensions of it fully before insertion into the mask, and what secures it in place?

Could even put some LEDs on the inside:

Click to expand...




You need to check out Master Leman's Store on Etsy https://www.etsy.com/uk/shop/MasterLemansStore all his masks are made of Kydex...

 
Yeah thats my issue, khaki, and i'd get a few more. :lol:

might get a black pair when another discount code comes out, i ended up getting the pencott wildwood

these are cut different to the usual SFU/CPU, luckily Military 1st have the great refund / exchange policy so was able to try many versions on due to issue with waist vs legs!!  :lol:

 
Last edited by a moderator:
djben9 said:
Yeah thats my issue, khaki, and i'd get a few more. :lol:

might get a black pair when another discount code comes out, i ended up getting the pencott wildwood

these are cut different to the usual SFU/CPU, luckily Military 1st have the great refund / exchange policy so was able to try many versions on due to issue with waist vs legs!!  :lol:
Click to expand...


Are they slimmer cut compared to the SFU? More like the UTP perhaps?

 
yeah a bit slim.... classed as 'anatomical cut'

im usually a L or XL, but find these in those sizes were tight on legs / upper thigh so had to go to XXL just so i could have that little bit of extra movement!.....annoyingly the velcro is almost at max so the belt is handy!......may need to get some stitched on the make the section longer 

still comfy and nice arrangement of pockets, another reason i had to change size....

 
Last edited by a moderator:
So from this 

View attachment 46844

To this 

View attachment 46845

So so where to begin. 

It appears my idea of shoots perfectly is not necessarily the same as others.

ive heard of tactical maracas but thought that applied to hicap magazines  not the gun itself, when I stripped it down the lack of screws etc explained the noise

I will just list what I had to do to get this back to what I wouid be happy with.

remove all two tone paint

trunion grub screws, yeah probably need those

folding stock pin grub screw, yeah probably need one of those too.

stripped hop unit screws, check

AK lever shuffle check

loose front grip reshimmed

shooting straight, naah curving right after 20m new hop rubber and s-hop now dead straight 

zenitco pts-1 stock cheek piece bolt missing

stock pin had been drilled out instead of driven so no longer exists so unable to replace with a standard one as top eyelet now had a 6mm diameter hole and bottom eyelet and stock had a 5mm hole

4mm diameter stock pin had been used so stock had a little? Wobble to say the least

stock 2mm too thin so had to make a spacer to go with a new custom fabricated stock pin to eliminate vertical play

shimmed folding bracket now no unnecessary movement

reduce from 410 to 320 fps, thankfully gearbox had been left untouched and LCT had built a good one

repsray in Matt black to hide faint remnants of previous dayglo 

new shs motor because I had one knocking about

new wiring harness with thicker silicon wire and xt60 connectors

just needs a gate Titan to shorten the trigger remove contact trigger issues in the 7.4 lipo and its cqb ready

good job I like AK variants!!!!!!!!!!

 
Last edited by a moderator:
Just ordered an Acetech AC6000 chronograph, should help figuring out if my teching  efforts are having any effect.

 
Magpul PDR-C ?

3W4kmpw.jpg


W37iEHW.jpg


 
You must log in or register to reply here.

Similar threads

pyromancer6
The ASG Armalite M15A4 saga
Replies
3
Views
506
pyromancer6
pyromancer6
Beorn
Beginner sling sorrows...
Replies
15
Views
4K
Rogerborg
Rogerborg
andersson
Old original G&G L85a2 - What can be done to it?
Replies
4
Views
583
Anonymoose
Anonymoose
MrTea
'Mk18' style AEG Build
Replies
1
Views
700
Rogerborg
Rogerborg
RostokMcSpoons
JG SA58/LK58 30000 FAL carbine owner's thread
Replies
4
Views
1K
JinxDuh
J
Back
Top