THE TM MWS thread

[hunter511]

@itsme

It'll be designed to run most efficiently on R134/R144a. The Japanese police have a habit of getting a serious sad on with anyone making or supplying bits capable of running above 1Joule. Running it on propane etc will probably be fine but is outside the design specs. For reference pure R134 @ 21degrees should be approx 71.2psi gauge pressure.

 

[LVOA-D]

@LVOA-D I know you changed your forward assist for a Strike industries one, I don't suppose you still have the original TM parts?

I do have all the original parts still as far as I know. Not sure if I still have an extra pin though because I had to use the TM pin on the SI forward assist. Send me a PM if there is anything I can do for you ?.

 

[Fissure]

I do have all the original parts still as far as I know. Not sure if I still have an extra pin though because I had to use the TM pin on the SI forward assist. Send me a PM if there is anything I can do for you ?.

Hi again, sorry for bugging you with a lot of questions, but once again regarding the SI buffer tube, how do you plan to do it with the buffer tube ring? I am guessing the TM buffer tube ring is to small for the threads on the tube? Did it come with a ring or did you buy their ring and spacer set as well?

 

[Hopegreen]

thank you sir,

the delivery cost from the store was a bit high so i found this one, you recon this will work aswel?

https://www.airsoft-entrepot.fr/we-outil-de-demontage-de-barrel-nut.html

Anybody knows at what psi the tm operates best? 

In my opinion this one won't work with MWS.

 

[LVOA-D]

Hi again, sorry for bugging you with a lot of questions, but once again regarding the SI buffer tube, how do you plan to do it with the buffer tube ring? I am guessing the TM buffer tube ring is to small for the threads on the tube? Did it come with a ring or did you buy their ring and spacer set as well?

No problem, that's what we are here for, but just to make sure, do you mean the castle nut? If so, I also have the SI castle nut / end plate set.

View attachment 46006

 

[Yukarin]

Finally joined the Master race, ordered the carbine version from GunFire with the plastic handguard and got the railed version, no complaints there but I have a rail for the MWS already.

Plan is an L119A2 short build. Slowly putting it together with one greviance already unfortunately, which is the AngryGun handle is not compatible with the TM charging handle, but oh well, a minor detail.

Noticed in this lovely heat that the magazine, not even fully charged on propane, was able to spit out around 50 shots without the Green Gas mod, im not gonna bother with the mod until winter where ill need the extra pressure?

View attachment 46040

 

[Fissure]

No problem, that's what we are here for, but just to make sure, do you mean the castle nut? If so, I also have the SI castle nut / end plate set.

View attachment 46006

Thanks!

Suspected as much, ordered the same one then

 

[LVOA-D]

Thanks!

Suspected as much, ordered the same one then

Nice, if you don’t mind me asking, where did you eventually buy it? 

 

[itsme]

I can’t even describe the joy this brings me ?

View attachment 46061

View attachment 46062

 

[L3wisD]

One day soon I will join the MWS master race.

I can't take all this jealousy anymore!

 

[itsme]

Fill the mags until the gas spits out. Most people don’t fill them enough

I’m filling my mag till it spits out gas but I just shot the mag that came with the riff empty and refilled it but it just stopped filling, no spitting. It’s like when you use the oring mod. 

I don’t hear any gas moving so I guess it’s allright?

Do you guys prefer green gas with or without silicon and why?

 

[Cipher-032]

All these MWS newbies are making me so happy! 

@itsme you should hear gas fizz out the fill valve, and the spit once full. Its quite an easy difference to spot.

Gas with silicone is always a plus as it helps keep the O rings lubed up a bit better. And saves having to strip the mags and lubing the gaskets and knocker valves

 

[itsme]

All these MWS newbies are making me so happy! 

@itsme you should hear gas fizz out the fill valve, and the spit once full. Its quite an easy difference to spot.

Gas with silicone is always a plus as it helps keep the O rings lubed up a bit better. And saves having to strip the mags and lubing the gaskets and knocker valves

All of the mags do this except for the one that came with the gun. 

It fills, you hear gas moving from the bottle to the ma but then it stops and you hear nothing, it doesn’t spit anything either. It’s like there is a o-ring in the fill valve. 

All these MWS newbies are making me so happy! 

@itsme you should hear gas fizz out the fill valve, and the spit once full. Its quite an easy difference to spot.

Gas with silicone is always a plus as it helps keep the O rings lubed up a bit better. And saves having to strip the mags and lubing the gaskets and knocker valves

All of the mags do this except for the one that came with the gun. 

It fills, you hear gas moving from the bottle to the ma but then it stops and you hear nothing, it doesn’t spit anything either. It’s like there is a o-ring in the fill valve. 

 

[RobHedley]

I can see why he might think that, if he is talking about the H nub which is much more angular, but agree with RobHedley - I don't think the SixG one will do that.

You run tracer in a GBBR? Brave! Whats your experience? What brand do you run?

I run tracers most Wednesdays in the World War 2 Tunnels down in Portsmouth and never had a problem. I have the ASG B&T Tracer unit  with Madbull .2 Tracers and it works perfectly.

@Wo1f I was looking at getting some Geoff's tracers as they come in heavier weights. Although down in the tunnels, with no wind etc and short engagement distances .2s are more than adequate.

 

[Jimmeh]

I run tracers most Wednesdays in the World War 2 Tunnels down in Portsmouth and never had a problem. I have the ASG B&T Tracer unit  with Madbull .2 Tracers and it works perfectly.

@Wo1f I was looking at getting some Geoff's tracers as they come in heavier weights. Although down in the tunnels, with no wind etc and short engagement distances .2s are more than adequate.

Yeah I realised after I posted that, I’ve been looking at heavier weight tracers by Longbow and Geoff’s and they are all bio, so I assumed bio.....

 

[RobHedley]

Yeah I realised after I posted that, I’ve been looking at heavier weight tracers by Longbow and Geoff’s and they are all bio, so I assumed bio.....

Oh, yes I see what you were talking about now. Definitely staying away from Bio's now as a number of them split when shooting them and gunked up my mag and barrel. As @Davegolf said, they are just too soft for the MWS.

 

[itsme]

The only  bbs I find in Belgium are bio or 0.36 and up. Anybody has a good brand for non bio bbs and tracers?

quick question. When I have my stock all the way in the smallest position the charging handle scrapes the stock a little. Is this normal? 

Also when do you guys relube the gun and mags? Like after how many mags,games,time. Whatever hehe. 

 

[_FIL_]

Realized I never posted a picture of my MTR16 here.

Just ignore the odd colors at both ends.

Sadly they have to be painted this way due to legal reasons, as its demanded by law.

View attachment 46091

 

[itsme]

@_FIL_ what a stupid law, where are you from brother? 

Like criminals/terrorist can't paint their real weapons in flashy colors ? 

 

[L3wisD]

what a stupid law, where are you from brother? 

I believe it's Portugal...?

There's some guys on the Specna Facebook group that have a whole team with day-glo yellow bits on the rear and front of their gun.

I believe they cover it with camo tape during games..