THE TM MWS thread

[clumpyedge]

Hey folks, slight change of topic. Anyone found a surefire way to get silent filling? My valves didn't come with o-rings, and Nineball fill valves don't seem to help much (they seem to sit too low leaving a few mm of thread exposed).

Is it just a case of buying a pack of o-rings and sticking them on the stock valves?

Pretty much (if you know the size) or you can buy the right sized ones direct from lees precision engineering

https://www.leesprecision.com/internal-fill-valve-silent-fill-valve-o-rings-pack-of-12

Be careful on how much gas you are putting in by listening as you can by using the orings equal the pressure of the can to the mag which I made the mistake of doing once

 

[Fissure]

Heya guys, thought I might throw out a question regarding an issue I am having with the mags for the MWS, have a TM speedloader that I only use for filling my grenades but thought I could use it for the MWS mags as well (its the larger one of the two) but trying to fill the mags broke the loader. One of the small screws popped out due to the hard resistance and jams up the pusher. It still works on AEG mags etc, tried a similar one a friend owns (don't know the brand) but no go there either. Anyone have any tips on a good loader that will work and why is it so freaking hard to load the mags, is this normal? (I am using the the little extension that is built onto the mag when trying to load btw)

Cheers !

 

[Immortal]

Heya guys, thought I might throw out a question regarding an issue I am having with the mags for the MWS, have a TM speedloader that I only use for filling my grenades but thought I could use it for the MWS mags as well (its the larger one of the two) but trying to fill the mags broke the loader. One of the small screws popped out due to the hard resistance and jams up the pusher. It still works on AEG mags etc, tried a similar one a friend owns (don't know the brand) but no go there either. Anyone have any tips on a good loader that will work and why is it so freaking hard to load the mags, is this normal? (I am using the the little extension that is built onto the mag when trying to load btw)

Cheers !

I use one of these. Not cheap but makes loading easy.

https://www.softairgames.net/en/bb-loader/16437-hurricane-speed-loader-for-series-marui-mws-gbb-warmag-wm-hurricane-9.html

 

[M.a.r.v.i.n]

Hi all, does anyone experience leakage in mags throu the filling valve? I had my mws in field this weekend for the first time. To my horror all of my five mags (all brand new) leak through filling valve so quickly that it doesnt empty one full mag. I tried to tighten the valve on one of them. I felt it could be tighten more but I remeber someone wrote here that it is easy to break them so I didnt put too much force on it.

Also I have two gasses and it leaks with both.

It seems weird to me because one mag came with the gun and four other were bought extra from a different shop. The mags are definitely a different batch but has the same problem.

Thank you in advance for any help.

 

[Immortal]

Hi all, does anyone experience leakage in mags throu the filling valve? I had my mws in field this weekend for the first time. To my horror all of my five mags (all brand new) leak through filling valve so quickly that it doesnt empty one full mag. I tried to tighten the valve on one of them. I felt it could be tighten more but I remeber someone wrote here that it is easy to break them so I didnt put too much force on it.

Also I have two gasses and it leaks with both.

It seems weird to me because one mag came with the gun and four other were bought extra from a different shop. The mags are definitely a different batch but has the same problem.

Thank you in advance for any help.

Whilst silicon isn't of any real benefit inside the mag, it is good with leaky valves.

Put a drop on the valve and give it a few split second fills with gas. Or use something you can push the valve with in & out. Just to work it into the parts a little. A thick silicon like the GHK one is better than a really runny one but anything will do tbh.

That's what I've always done with any mag that has leaked from either valve and it's always fixed them (unless damaged but as you have 5 mags leaking I very much doubt they are leaking from any damage).

 

[Fissure]

I use one of these. Not cheap but makes loading easy.

https://www.softairgames.net/en/bb-loader/16437-hurricane-speed-loader-for-series-marui-mws-gbb-warmag-wm-hurricane-9.html

Thanks a lot for that, had no idea that existed. Have a m12 sidewinder for my AEGs and loving it. Guess I will have to get one of these as well!

Goddamn shipping is more than the loader itself to Sweden, that's insane

 

[Immortal]

Thanks a lot for that, had no idea that existed. Have a m12 sidewinder for my AEGs and loving it. Guess I will have to get one of these as well!

Goddamn shipping is more than the loader itself to Sweden, that's insane

Yes, the shipping is the worst but it's the only place I've found with these type of winding speedloaders unfortunately.

It does do the job though and it's a step up from the tube loader that comes with the MWS. And as you've found out a normal speedloader just can't handle loading an MWS mag very well if at all - I had no luck trying.

I would of thought TM could have come up with something a little more than a tube and plunger considering the effort and quality of the RIF itself. Something I could carry in a game would be ideal - no such luck as of yet.

 

[jcheeseright]

How about a Yeaaaaaaaaaaaah or are you saying Eotech don't know their own products?

View attachment 45211

Kids these days..... :lol:

I think you're missing the point of co witnessing, literally every single red dot available on the market can be co witnessed, this is not a unique EOTech feature.  

Additionally, the image you've posted there is simply a guide on how to zero your sight using iron sights that have already been zeroed, again, this is something any red dot sight and/or laser can do.  

EOTech sights are designed to be used standalone, while the front sight post will not impede their use it doesn't add ANYTHING to it at all. 

 

[RobHedley]

In the words of the modern day poet, Ice Cube “I gotta say, today has been a good day”!!

a few goodies turned up today including the War Mag reloader that @Immortal recommended. Works perfectly although I assume the winding handle Is prone to breaking as they send your 2!!

Green Gas mod now done on all the mags, going to fill them to test for leaks then do a bit of chronoing with it stock.

View attachment 45274

View attachment 45273

 

[Fissure]

Yes, the shipping is the worst but it's the only place I've found with these type of winding speedloaders unfortunately.

It does do the job though and it's a step up from the tube loader that comes with the MWS. And as you've found out a normal speedloader just can't handle loading an MWS mag very well if at all - I had no luck trying.

I would of thought TM could have come up with something a little more than a tube and plunger considering the effort and quality of the RIF itself. Something I could carry in a game would be ideal - no such luck as of yet.

Yeah bringing out your exclusive kitted TM MWS and pulling out the plastic plunger tube is humiliating xD

 

[_FIL_]

Yeah bringing out your exclusive kitted TM MWS and pulling out the plastic plunger tube is humiliating xD

Been there... Done that... ?

 

[FreeFrag.UK]

Been there... Done that... ?

To be honest this is how I load my mag's. I've got a speed loader with adapter but I've found that the easiest and quickest way of loading is still to use the loader it comes with. I've found speedloaders to be a pain in the arse to be honest.

I am curious to hear how that Hurricane loader holds up though.

edit: I must admit, I'm still attempting to find somewhere which has the stock I'm after available. Presently waiting for some email responses but I guess I'll just have to be patient for now.

 

[LVOA-D]

It has finally arrived!

Small edit: Didn't know the MWS couldn't take real buffertubes Any way around this?

View attachment 45294

 

[Davegolf]

MWS has a Milspec dia buffer tube, I'm assuming you're saying the thread is different though?

 

[LVOA-D]

Yeah sorry, that is indeed what I meant. Most stuff needs a little filing to fit but the buffer tube won’t fit at all unfortunately.

 

[Guest]

Yeah sorry, that is indeed what I meant. Most stuff needs a little filing to fit but the buffer tube won’t fit at all unfortunately.

Get LCs Engineering on FB to modify the tube, he’ll be able to put a thread on it that fits perfectly

 

[_FIL_]

To be honest this is how I load my mag's. I've got a speed loader with adapter but I've found that the easiest and quickest way of loading is still to use the loader it comes with. I've found speedloaders to be a pain in the arse to be honest.

I am curious to hear how that Hurricane loader holds up though.

edit: I must admit, I'm still attempting to find somewhere which has the stock I'm after available. Presently waiting for some email responses but I guess I'll just have to be patient for now.

Me too since I got no other way at the moment...

Takes time but got to admit it works.

 

[Fissure]

It has finally arrived!

Small edit: Didn't know the MWS couldn't take real buffertubes Any way around this?

View attachment 45294

Nice bunch of parts there! Looks like a sweet build, shame about the buffer tube though. Hope you manage to get it sorted out somehow.

Where do you source your parts from?

Btw do anyone here know if RS Selector Switch, bolt catch, Takedown pins and trigger guard will fit the MWS? Guessing a no on the selector switch and bolt catch at least. Would love to have this on my MWS

https://www.strikeindustries.com/shop/products/ar/lower-parts-kit/strike-switch.html

 

[LVOA-D]

@rocketdogbert Cheers man, have already found a shop in the Netherlands to re-thread it though, probably a little bit more cost efficient considering it'd have to be shipped overseas twice 

@Fissure All the Strike Industries parts are bought in Poland, at Specshop.pl (which is a wonderful store, will throw up a review in the coming days). Pretty much the only store that

has a decent selection of Strike Industries parts. Other than that they have a bunch of MagPul stuff as well and wide variety of both real and airsoft accessories.

Must say I have returned the Pit Viper Stock and the Anti-Walk Pins. The stock was too small for my frame and the pins can not be fitted to the MWS. Getting an adapter made for the real flashhider

at the same store that's going to re-thread the buffertube. They will also re-thread the upper for the rail while they are at it. The Iron Airsoft trigger is installed but I accidentally broke something so

I am going to have to wait for the replacement part (which at the moment I could only find in Japan at Impulse101) to continue. Doesn't really matter because all the re-threading work won't be done

for the next three weeks so updates will be scarce unfortunetely...Guess I will have to start fiddling with the new build for my GHK M4(if I am allowed to say so here in the MWS forum ?).

Internally I have installed the tan bucking, SixG super nub and the Prommy inner barrel but seeing as someone broke something in my MWS, I haven't been able to test it yet...

EDIT: picture of the trigger housing, broke the detent for the safety selector. Flat face trigger looks sweet though!

View attachment 45341

 

[Fissure]

@rocketdogbert Cheers man, have already found a shop in the Netherlands to re-thread it though, probably a little bit more cost efficient considering it'd have to be shipped overseas twice 

@Fissure All the Strike Industries parts are bought in Poland, at Specshop.pl (which is a wonderful store, will throw up a review in the coming days). Pretty much the only store that

has a decent selection of Strike Industries parts. Other than that they have a bunch of MagPul stuff as well and wide variety of both real and airsoft accessories.

Must say I have returned the Pit Viper Stock and the Anti-Walk Pins. The stock was too small for my frame and the pins can not be fitted to the MWS. Getting an adapter made for the real flashhider

at the same store that's going to re-thread the buffertube. They will also re-thread the upper for the rail while they are at it. The Iron Airsoft trigger is installed but I accidentally broke something so

I am going to have to wait for the replacement part (which at the moment I could only find in Japan at Impulse101) to continue. Doesn't really matter because all the re-threading work won't be done

for the next three weeks so updates will be scarce unfortunetely...Guess I will have to start fiddling with the new build for my GHK M4(if I am allowed to say so here in the MWS forum ?).

Internally I have installed the tan bucking, SixG super nub and the Prommy inner barrel but seeing as someone broke something in my MWS, I haven't been able to test it yet...

EDIT: picture of the trigger housing, broke the detent for the safety selector. Flat face trigger looks sweet though!

View attachment 45341

Shame about the trigger, running the same trigger on my DMR build! Did the flashhider not fit as well?? Wanted to try out their dummy suppresor but that might be a bad idea then?

Edit they are 12,7mm thread size, and the MWS is 13 or 14mm I velive, well that sucks ?