-
Hi Guest. Welcome to the new forums. All of your posts and personal messages have been migrated. Attachments (i.e. images) and The (Old) Classifieds have been wiped.
The old forums will be available for a couple of weeks should you wish to grab old images or classifieds listings content. Go Here
If you have any issues please post about them in the Forum Feedback thread: Go Here
THE TM MWS thread
- Thread starter Wo1f
- Start date
Cipher-032
Members
- Feb 26, 2011
- 285
- 76
I think you need some more mags.
Cipher-032
Members
- Feb 26, 2011
- 285
- 76
I personally run 6 main mags. And 3 secondary. Seems to do me well enough. 5 might just cut it fine personally but that's down to you.
FreeFrag.UK
AF-UK patch owner
- Feb 16, 2018
- 615
- 106
Dropped a message concerning the magazines.
I can't wait for my M4A1 to arrive, I just wish I could find all the parts I'm searching for. Some are proving quite elusive.
I can't wait for my M4A1 to arrive, I just wish I could find all the parts I'm searching for. Some are proving quite elusive.
Cipher-032
Members
- Feb 26, 2011
- 285
- 76
I tried a different bucking combo last weekend. All I can say is the madbull red with the stock barrel is terrible. Went back to TNT TR and the maple leaf and it was much more consistent. Albeit with a rushed rebuild and not 100% perfectly aligned.
Ive decided to buy a modify tan bucking. And emailed SixG to buy their super nub. I wanna give this popular combo a try.
So what inner barrels are people using with said bucking and nub? Stock, Prommy or other?
Bucking is advertised to be 60-65 degree hardness. Hope it can lift a .28 in the cooler weather currently.
Failing that ill use the Super nub with the TNT and see how that fairs.
Ive decided to buy a modify tan bucking. And emailed SixG to buy their super nub. I wanna give this popular combo a try.
So what inner barrels are people using with said bucking and nub? Stock, Prommy or other?
Bucking is advertised to be 60-65 degree hardness. Hope it can lift a .28 in the cooler weather currently.
Failing that ill use the Super nub with the TNT and see how that fairs.
Last edited by a moderator:
Davegolf
Members
- Sep 22, 2009
- 2,103
- 850
Stock TM or Prommy barrel work great for accuracy, the latter more so.
If you are looking for high (DMR) FPS then get a longer barrel otherwise 250-350 is most accurate.
A TNT style bucking will not work with a SixG Super Nub, you'd essentially have to concaves.
Start out with a healthy/new TM bucking & Super Nub combo as a baseline for performance.
This will overhop 0.36 in the cold no problem.
If you are looking for high (DMR) FPS then get a longer barrel otherwise 250-350 is most accurate.
A TNT style bucking will not work with a SixG Super Nub, you'd essentially have to concaves.
Start out with a healthy/new TM bucking & Super Nub combo as a baseline for performance.
This will overhop 0.36 in the cold no problem.
- Thread starter
- #991
As Dave said, the SixG nub isn’t ideal for long contact patch, concave buckings. It works, but you’re not going to get the benefit of the bucking. A standard bucking or a modify tan uses a normal mound style hop, so it’s idea with the SixG nub. I’ve used that in a previous DMR setup and was able to hop .40’s no issues.
If you want to use long contact patch buckings like the TNT I’d advise a barrel with a longer window as the mound can hit the front of the barrel window. I’d also suggest opening up the chamber where the nub sits and running a longer nub.
If you want to use long contact patch buckings like the TNT I’d advise a barrel with a longer window as the mound can hit the front of the barrel window. I’d also suggest opening up the chamber where the nub sits and running a longer nub.
I am waiting for the arrival of my SixG and the Tan Bucking AND the ORGA LEX05 410mm 6.05 inner barrel, to see what can i get on the MTR16 by mirroring the build from the friendly @Wo1f who was kindly enough to share us his DMR build being able to hop .40's at 70-80 meters.
Once i get all the parts i will post a full review with my findings
Last edited by a moderator:
Looking forward to do the same but the hunt for parts is proving difficult here in Portugal.
Starting to look to shops outside Portugal but no one has all the parts I need so that they can come in just one go
.Still need to do some more research and see shops I still haven't looked at yet...
Then I have to look for a tm compatible version with a extended handle. I'm not even sure that they exist...
PopRocket123
Members
- Dec 12, 2016
- 1,518
- 773
Well congrats guys you've converted another. I already have a GBBR. It's a very nice very rare G&P WOC SR-15 in beautiful condition with 7 50 round mags and now all I can think about is how many mags I'd get with an MWS if I sold them all... You bastards
FreeFrag.UK
AF-UK patch owner
- Feb 16, 2018
- 615
- 106
Just thought I'd throw a feeler out. Are any of you find upstanding gentlemen with MWS' looking to part with the KAC RIS which it comes with? If so please can you give me a heads up what you'd be looking for.
I've ordered my M4A1 and I can't wait for it to arrive. I was originally hesitant to enter the world of GBBR's for a variety of reasons but since ordering I've really been bit by the bug when it comes to researching and tracking down parts for a project. I've already got it fixed in my head what I'm doing with it and can't wait to get it into the field.
I've ordered my M4A1 and I can't wait for it to arrive. I was originally hesitant to enter the world of GBBR's for a variety of reasons but since ordering I've really been bit by the bug when it comes to researching and tracking down parts for a project. I've already got it fixed in my head what I'm doing with it and can't wait to get it into the field.
Similar threads
