RFID Domination Timer - complete prototype
RFID Domination Timer - complete prototype
£175
-
Advertiser
- Feedback 0 0 0 - Rating 0%
- Type of Advert For sale
- Item Condition As new
- Time Left THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Quantity 1
Description
I am selling complete prototype of RFID Domination Timer 2.0 device. It is stopwatch created for Airsoft events with second resolution.
It is possible to let it count up to 99 hours, 59 mintues, 59 seconds, so it is suitable for LARP even MilSim events.
How it works in the video:
- 10 RFID cards - RED team
- 10 RFID cards - BLUE team
- 2 RFID cards - Referee (can pause the time)
- 2 RFID cards - Referee (can stop and reset the time)
RFID cards are white, there is team name written on them by centropen. Device is operated by Arduino Nano microcontroller that will be already programmed for your application.
That means you can use the device immediately after delivery. Usage is very intuitive. Device is not waterproof and should be used indoors or outdoors but not in wet, high-humidity places. All components are inside the PLA 3D printed enclosure and mounted together by screws. You are able to mount the device on the tree, pipe, joist by its tie-belt with spring mechanism that can lock it.
You will also receive the .hex file in case you will want to reupload the firmware or to clone it to any amount of own devices.
You can built more RFID DOMINATORS in a single Airsoft playground which will react on the same RFID cards.
Dimensions:
124 x 123 x 48 mm
I am able to do a specific programming, bonus functionality etc based on your requirements. Also it is possible to create a 4-team firmware or to implement even more RFID cards in total based on individual deal.
There are white or black 3D printed enclosures. Also it is possible to built the device with blue or yellow LCD screen.
Make sure you type which one you want, otherwise I will send random. You will also receive a phillips screwdriver using which you can set the contrast on your LCD screen.
Trimer for contrast control is accessable from the back side of the device. It is required if you were using the device in hot weather and then if it comes at the cold weather, some correction will be required.
Note: It is a prototype. It means, it has no certifications and can be used on your own risk. It is delivered as incomplete device, as charging cable is not present in the box.
Recommended Questions
There are no questions to display.